East Lomond is now open for model flying with one or two restrictions.
Contact me directly for further info and the revised competition dates.
--
Ron Russell
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED]
I'm working on fiberglassing a wing and was told to use Mentholated Spirit to
thin out the epoxy by 40-50% on the final, finishing coat. I've been looking
at my local hardware stores, but the closest I can find is White Spirit which
looks and smells like your standard, everyday paint thinner.
I have had good luck cutting foam grooves by simply heating the last 6 or
8 inches of a piece of stiff steel wire with a propane torch and laying it
almost flat on the foam and dragging it along a line. Not really precise but
fine for burying antenna, wire or pushrod tubes. Practice on a piece of
Title: CF or GF spars
Can someone give me sites with techniques/tips to use CF or GF spars in foam
sheeted wings?
I'm planning start using this kind of reinforcement in a 1,52m (60) slope
racer, with MH32 and 1,6mm (1/16) balsa sheet, since I don't want the wing
to flex at all!! (better
Is JT Models onvacation? No response to e-mail and phone number on web
site gets me a fax line. Help. Want to place order.
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED]
Check out
http://www.cstsales.com/SparBuilding.htm
and http://www.favonius.com
--- [EMAIL PROTECTED] wrote:
Can someone give me sites with techniques/tips to use CF or GF spars
in foam
sheeted wings?
__
Do You Yahoo!?
Yahoo! Auctions -
Well the Twin Jet still rocks!
I really didn't want to test the durability of this fun model. But I did
in a manuver comming out of inverted. Thought I had the room.
Didn't!!!It hit level in weeds.. No damage to frame! All though I
did take the speed controll out. I guess thats the price you
Charles French wrote:
I took a few but sent the majority to the BASS folks. I did keep three, two
of some Kevlar winged planes and one of someone throwing DHL for the first
time.
http://home.att.net/~items/DHL/Pics.htm
The picture of Russell Bennet throwing is pretty impressive.
I had no
Hi All,
Has anyone tried extra hold hairspray as a mold release agent? I read in a
publication, put out by a resin manufacturer, that it works well. It's the
same idea as PVA, water soluble and all, except that I can get a nice thin,
smooth coat. BTW, I'm using West System resin, in case that
9 matches
Mail list logo
