Andrew E. Mileski wrote:
Prompted by a RCSE reader in response to my posts on the subject,
I've thrown together a web page describing one way to connect a
vacuum switch to a vacuum pump.
http://isoar.ca/~andrewm/rc/vacswitch.html
As Chris Bayley kindly pointed out, the schematic had the
I bought an obechi-sheeted plane a couple of years ago. The previous
owner had glued the servos in with Zapadapagoo (similar to shoe-goo)
and generally botched the installation. The only remedy was to cut the
whole mess out in a big circle and install Chris's servo cans.
Last year I acquired
When they tried it with full scale they had problems with the empennage
getting tangled in the baloon tether line.
Richard Shilling
RCSE-List facilities provided by Model Airplane News. Send subscribe and
unsubscribe requests to [EMAIL PROTECTED]
Who is Chris, and where do I find these servo cans? Can they be used in very
shallow wings? Thank you!
David Shanks
Salt Lake City, Utah
- Original Message -
From: tony estep [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, January 13, 2002 6:26 PM
Subject: Re: [RCSE] Glue in or
--- David Shanks [EMAIL PROTECTED] wrote:
Who is Chris, and where do I find these servo cans? Can they be used
in very
shallow wings? Thank you!
Check 'em out at:
http://www.scrollsander.com/Soaring-ServoCans.htm
__
Do You Yahoo!?
Send FREE
5 matches
Mail list logo