Re: [RCSE] Digital Camera

2004-11-04 Thread Bill Malvey
On 11/4/04 8:14 [EMAIL PROTECTED] wrote: > Also keep in mind that the EOS body will accept the full line of EF-series > lenses with a lens factor of 1.6 - e.g. if you have an existing 300mm it now > looks like a 480mm. Makes it handy for switching back and forth between film > and digital bodies.

[RCSE] Re: For Sale, vacuum pump

2004-11-04 Thread Michael Neverdosky
Less than 4 minutes from my send this email out and getting the first response. I have a buyer and one person in line if that falls through, so consider this one gone. I wish I had a bunch of these. michael N6CHV AMA 77292 Michael Neverdosky wrote: This is a very nice, quiet, compact vacuum pump. i

[RCSE] For Sale, vacuum pump

2004-11-04 Thread Michael Neverdosky
This is a very nice, quiet, compact vacuum pump. it is a Mada MadaVac II No.178. It runs on 115VAC drawing a rated 1.7A. It has a vacuum gage and bleed valve to make setting the desired level easy. When I run it and block the hose the gage indicates 22" Hg. When the built in gage reads 22" Hg my 4.

[RCSE] For Sale: Robbe Power Peak Infinity 2 Charger

2004-11-04 Thread Joe Nave
FOR SALE Robbe Power Peak Infinity 2 Charger in original box with manual - used for about 2 years, in "like new" condition. Product review: http://www.rcbatteryclinic.com/infinity2.htm I paid $160, selling for $80 (incl. shipping CONUS). Please e-mail off-line if you have any questions

[RCSE] Book for sale, "Guide to Computer Radio Control Systems" by Edberg

2004-11-04 Thread Michael Neverdosky
You can get the PDF from Don for $10 or you can get the paperback book from me for $10 shipped in the continental USA. michael N6CHV AMA 77292 RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and u

[RCSE] For Sale; JR x347 with accessories

2004-11-04 Thread Michael Neverdosky
I have for sale a JR x347 transmitter and goodies. X347 transmitter PCM RF module model NET-J50P with crystals for channels 2,4, and 6 RF module model NET-J53M on 53.3 JR receiver NER-327x (Century 7 series) with crystal for 53.3 Deluxe switch harness DSC cord JR wall wart charger model NEC-221 Ch

[RCSE] Winch Drum Diameters

2004-11-04 Thread Peter Williams
Hi Eddie I use 40mm and clam up to 65mm. I also have a long drum to help keep the dia lower for longer. I usually use the clamshells unless the wind is blowing fairly heavily and then I will go to the 40mm. I don't fly enough to really have a good handle on the differences but I suspect the dia

[RCSE] Two channel gyro for V-tail or ailerons or ??? For Sale

2004-11-04 Thread Michael Neverdosky
I have a Hobbico Piezo Gyro model HCAM4010. This has two input and output channels, is very small and light and works great. I used it in my Flamingo for spiral stability experiments. I'm not flying anymore so it is for sale. It will come in the original package with instruction sheet. I paid ove

Re: [RCSE] zip launch HLGs

2004-11-04 Thread Aerofoam
>We haven't used the zip starts that Bruce describes for a couple of years due to the emergence of disk >launch and the difficulty of achieving reasonable equivalence between a zip start and disk launch. To match >a good disk launch, you almost need an upstart which is so long . If the HLG

Re: [RCSE] Cumberland Soar for Fun - reminder

2004-11-04 Thread Bill Swingle
>DUE TO LOCAL PAGER ACTIVITY, USE OF CH 23, 24, 31 & 32 NOT RECOMMENDED! Pardon me but I have to ask again. If they're "not recommended", does that mean flying on those channels is allowed?? Shouldn't those frequencies be prohibited? Bill Swingle RCSE-List facilities provided by Model Airplane

[RCSE] Digital Camera

2004-11-04 Thread RegDave
Also keep in mind that the EOS body will accept the full line of EF-series lenses with a lens factor of 1.6 - e.g. if you have an existing 300mm it now looks like a 480mm. Makes it handy for switching back and forth between film and digital bodies.   Either way, a 300mm zoom is a reasonable

[RCSE] Winch drum diameters

2004-11-04 Thread Eddie Smith
Hi Guys . I was wondering what drum dia's you are using on your FAI winches. it seems that the drum dia's are creeping up a little from when we first built to the F3b winch rules.I remember Nic Wrights winch having a 42mm dia drum some time ago. I've just built a new drum this week a