Try "cat /var/log/messages > syslog.txt" and send the relevant parts -
stuff related to modem_run, pppoa3, pppd at the end of the syslog.txt -
to the list.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Paul Hudson
Sent: 13 March 2003 18:41
To: [EMAIL PR
Try using mgmt.o downloaded from the Alcatel website instead of the
windows file. This caused loads of CRC errors for me.
Regards,
Frans
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Jose Bernardo Silva
Sent: 23 February 2003 15:20
To: speedtouch ma
Here you go.
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor= ProdID= Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=c800
C:* #Ifs= 1 Cfg#= 1
I had this problem when I used the .sys file included with the Windows
driver package instead of mgmt.o from the linux driver package. Which
are you using?
Regards,
Frans
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Vaessen, E.M.J. (Ed)
Sent: 20 Dec
bject: [speedtouch] Re: pppoatm3 and Deutsche Telekom
Does not work, the -e 1 switch
Bruno
- Original Message -
From: "Frans J King" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 13, 2002 2:05 AM
Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom
You EITHER do ppp over atm (PPPoA) or ppp over Ethernet (PPPoE). Yes it
does matter which you use because this is how the modem communicates
with the peer on the other side. PPPoA encapsulates the PPP frames
within ATM frames while PPPoE encapsulates the PPP frames in Ethernet
frames.
-Orig
Yes. You need the -e 1 switch.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Bruno
Sent: 13 December 2002 00:29
To: [EMAIL PROTECTED]
Subject: [speedtouch] Re: pppoatm3 and Deutsche Telekom
I've got the same problem in mandrake 9.0 with the 330 modem
