Hi,
I installed my speedtouch usb on Linux redhat 9 according to - HowTo de
lea-linux.org with free driver of Benoit Papillaut.
But connection with ppp don't run.
There are many error in my /var/log/messages , I don't understand.
Jun 8 02:27:48 localhost modem_run[5570]: modem_run version 1.3.
Hello
I am trying to use the speedtouch drivers 1.2Beta with my Debian woody (it's a fresh
install of the release 1). My box is a P4 and my provider use pppoe. My modem is an
Alcatel Speedtouch USB.
At the moment my modem is hanging up after a "..no such device" error.
I have tried to
Hi,
I'm using the Speedtouch modem for teh ADSL service by Wanadoo.
I have RedHat8 (Kernel 2.4.18-14) installed, and installed the RPM for
Speedtouch (speedtouch-1.1-1.i586.rpm).
The modem_run command seems to work fine (see also message.log below), but
the command
# pppd call adsl
produces a mod
Hi folks,
time for my bi-weekly post on my modem hangup problem :-)
This time, an update as pppoa3 is somewhat more verbose in the logs than the
old pppoa2. By the way, the problem appears with pppoa2, pppoa2m (aka new
pppoa2) and pppoa3.
System : debian unstable, 2.4.7 kernel, pppd 2.4.1,
Bonjour,
après quelques heures de connexion (durée apparemment non fixe), le
modem se déconnecte et il n'arrive plus à se relancer, que ce soit
automatiquement avec le hdlc ou manuellement en tuant le pppd et en le
relançant. La seule solution pour le faire refonctionner semble être
d'éteindre
C'est tout nouveau, ça vient de sortir, je n'avais pas le problème
avant, et oh surprise, je suis incapable de dire ce que j'ai changé qui
crée ce problème : des déconnexions toutes les minutes au moins ...
Ma config : kernel 2.4.7 vanilla + patch n_hdlc, pppd 2.4.1, pppoa2 1.9,
driver modem du 1
DESOLE POUR LE DOUBLE-EMPLOI mais j'ai besoin d'une réponse rapide.
Bonsoir,
comme beaucoup j'utilise le driver BP. Cela évite de compiler l'univers
entier comme conseillé par l'installation officielle Alcatel.
Non pas que ce soit pénible - une fois que c'est fait c'est fait - mais
cel
##
--## d'abord tout se passe
correctement j'obtiens le feu vert à la fin
demodem_run##
-- ADSL line is up, downstream at 608
kbit/s, upstream at 160 kbit/s ADSL link goes
UP## --##
là je lance la comma