formbypc wrote:
> Will try again tomorrow. Getting late in my part of the world
It's under processes as Logitech Media Server (on my setup)
---
formbypc wrote:
> I have an SBT, connected via a standard home router, via Ethernet, to a
> Windows 10 PC which holds my Music Library.
>
> A long time ago, I downloaded iPeng to my iPad of the time, and for a
> while, this was fine, but a bit flakey.
>
> The only purpose the router serv
You can use a 1/8" jack
to RCA audio cable to get from the RPi to the Touch's RCA inputs.
..
???
The Touch doesn't have rca inputs
d6jg wrote:
> If using Material its very very easy to move a rogue player or players
> back to the correct LMS after a server reboot.
> I have 3 x local LMS and 1 remote but accessible via VPN. It used to be
> a pain but now its simple.
Thanks. Easy for some but not for better half, I'm afra
mherger wrote:
> > I have 2 servers. How can I assigned a preferred server to different
> > players?
>
> What kind of players? Original hardware would stick to what it used
> last. Squeezelite can accept a server IP on the command line, I believe.
Mainly players using the various bridge Plug
I have 2 servers. How can I assigned a preferred server to different
players?
castalla's Profile: http://forums.slimdevices.com/member.
Dishymark wrote:
> The LMS is running on on 192.168.1.7 (aka cinema) (static ip)
> web interface accessed on 192.168.1.5, (static ip)
> Squeezebox on 192.168.1.236 and 192.168.1.130 both assigned ip addresses
> by dhcp, but always seem the same for a given device.
>
> Thinking about this, it
garym wrote:
> I wouldnt touch anything that is not recognized as a Squeezebox
> endpoint (eg real touch or transporter or rPi with piCorePlayer feeding
> a good DAC). Moving to upnp now would be like trading in your 2021 smart
> phone for a 20 year old PalmPilot with an add-on 300 baud portable
ricko wrote:
> Thanks to all for your replies... sounds encouraging.
>
> Probably the best step would be to spend a little $$ on a low end device
> and play around with the plugin before pulling the trigger on a
> unit.
>
> Will see if there are any dealers in Kiwi Land for the unit
atrocity wrote:
> A friend is finally getting his music online and is looking at LMS
> alternatives due to the fact that, as far as either of us can tell, all
> communication via the web interface, smartphone/tablet clients, etc. is
> vanilla http and not https.
>
> I don't recall ever reading
d6jg wrote:
> Listed as incompatible. Just unsure whether a freshly flashed one would
> connect to an 8.x server.
> Mine were probably all once connected to a 7.9 server
Can't check at the moment but iirc one of mine works okay despite the
warning message.
YMMV.
---
Do you mean they are listed on the info tab as 'incompatible' or they
actually fail?
I believe there's a patch somewhere but can't find it...
--
philippe_44 wrote:
> It has resuming. I also have added an extension, if you look under 3rd
> party plugins, you'll see a "Podcast Extensions" that adds a few extra
> things
If only there were something similar for audiobooks.!
slartibartfast wrote:
> Aren't they configured in player settings "Additional Browse Modes"?
>
> Sent from my Pixel 3a using Tapatalk
Bingo! Thanks.
d6jg wrote:
> If you use Material skin you can choose exactly what is shown and where
I'd like to reduce the categories for the Controller display. Pity the
controller can't use material.
-
My Music has a long list of sub menus... Eg. composers, etc.
Is there a way to reduce the number of categories?
Thanks.
castalla's P
Nobody ever suspects their arrival
I've had problems trying to mount a cifs share using the pcp field -
stripping out all that uid stuff and just specifying vers=1.0 finally
worked
---
themetman wrote:
> I have PiCore version 7 running on a Pi4
> I have an NFS share on my Linux Server (shared with several computers on
> my network).
> In the PiCore System I have setup NFS in LMS with default settings as
> uid=1001,gid=50 and just added ver=4 or ver-3 neither work.
> I have als
Michael83 wrote:
> Hi there,
>
> thanks a lot for all your effort! Around 10 years ago I started with a
> Squeezebox Radio and switched to Sonos a while after that. Over the
> years Sonos changed some things within their eco system I did not like
> and with their announcement to drop support fo
Toi toi toi!
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Sho
God only knows.
Ask Sonos, and hope you get a sensible reply.
>From what I read on the Sonos community forum, you could be buying into
a very expensive hit'n'miss experience.
It may work better using the upnpbridge plugin, but again your mileage
may vary.
LMS server: O2 Joggler with Jive
Similar using Vivaldi on Linux Mint
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub,
mherger wrote:
> > There was no update notification today until I selected the manual
> check
> > in Settings.
>
> There aren't daily updates. If you keep pressing the check button every
>
> day there will never be a notification.
>
>
> --
>
> Michael
I probably haven't explained what hap
mherger wrote:
> > I'm sure 'Keep' is checked. What log level - it's set to error at
> the
> > moment.
>
> No, set it to debug. Error would only log errors, debug does log a log
> more, like eg. "updates disabled" and similar stuff.
>
> --
>
> Michael
There was no update notification toda
EEYORE wrote:
> Castalla,
>
> I have been having this problem also. But in reading this thread, and
> checking my software updates settings, I found that I have LMS set to
> check for updates daily; the choices are daily/weekly/monthly. I have
> been assuming that the notific
mherger wrote:
> > Strange ... got one update notification yesterday, but none today for
> > latest.
>
> I can only ask you to enable logging for server.update once again.
> Please note that you'll have to re-enable it after each restart, unless
>
> you check the "keep during restart" box at
Strange ... got one update notification yesterday, but none today for
latest.
Now, checking for update manually in Advanced - Software Updates reports
when an update is available.
Looks as if the auto settings do not stick.
Can I do anything to fix this? or is it a case of install again from
mherger wrote:
> > LMS is no longer notifying that a server update is available, despite
> > .software update being activated.
>
> Enable logging for server.update and give it at least 24h time. Then
> check server.log for any information related to the update.
>
> --
>
> Michael
Nothing i
Enabled logging.
Latest update not announced - nothing in server log.
Had to manually update.
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe
LMS is no longer notifying that a server update is available, despite
.software update being activated.
This behaviour has started with one of the recent updates within the
last week.
(Observed on deb and arm)
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
P
mherger wrote:
> > [20-05-23 10:48:26.4523] Slim::bootstrap::tryModuleLoad (286)
> Warning:
> > Module [Plugins::Sprocket::Plugin] failed to load:
> > Can't locate Try/Tiny.pm in @INC (you may need to install the
> Try::Tiny
>
> My fault. I updated some libraries. And this seems to be a new
>
Log shows this for last startup:
};
[20-05-23 10:48:13.0718] main::init (388) Starting Logitech Media Server
(v8.0.0, 1590212021, Sat May 23 08:54:23 CEST 2020) perl 5.028002 -
arm-linux-gnueabihf-thread-multi-64int
[20-05-23 10:48:26.4523] Slim::bootstrap::tryModuleLoad (286) Warning:
Module [P
bpa wrote:
> MAX_WBITS is part of the CPAN Compress::Raw::Zlib module
>
> Do you have problem at startup finding Zlib ?
No idea! How could I check??
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s
PcP server details:
Logitech Media Server Version: 8.0.0 - 1590212021 @ Sat May 23 08:54:23
CEST 2020
Hostname: piCorePlayer
Server IP Address: 192.168.1.40
Server HTTP Port Number: 9000
Operating system: piCore - EN - utf8
Platform Architecture: armv8l-linux
Perl Version: 5.28.2 - arm-linux-gnu
Updated to latest ver. 8 on PcP and Joggler (deb).
No players appear in the gui.
Here's a snippet of PcP log:
---
[20-05-23 11:41:02.7543] Slim::Networking::IO::Select::__ANON__ (130)
Error: Select task failed calling
Slim::Networking::Async::HTT
Prime Heretic wrote:
> You're seeing the same issue?
Not often - it happens occasionally, but a page reload usually fixes it.
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM
kidstypike wrote:
> Maybe > LMS > Settings > Advanced tab > Client Cleanup (drop down) ?
>
> (Michael doesn't see edits).
... and I don't see Client Cleanup as an option, either !
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logi
I see this message also ... on any chrome-based browser in Linux.
LMS server: O2 Joggler with Jivelite, Pi Zero W with PcP 6.0
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast
mherger wrote:
> > 2020-04-17 06:35:25 squeezeboxserver_safe started.
>
> This has nothing to do with safe mode. It's basically a watcher daemon
> which would monitor the actual server code and restart it should it
> fail.
>
> Some have claimed it was a legacy thing.
>
> --
>
> Michael
Ok
I have 2 different LMS installations, one uses Ubuntu 18.04.1 and the
other is PcP 6.0.
When the Ubuntu fires up, the log always shows
2020-04-17 06:35:25 squeezeboxserver_safe started.
[20-04-17 06:35:30.9176] main::init (388) Starting Logitech Media Server
(v8.0.0, 1586839173, Tue Apr 14 09:
I find fade-in unnatural for library albums, tracks ... however, I think
it's an ideal candidate for radio streams (where it's often more used by
stations themselves).
LMS server: O2 Joggler with Jivelite
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libr
Thanks for all the relies. My question relates to LMS on Jivelite for
Joggler.
Here's a typical log entry if the Joggler reboots - maybe I just need
to delay until the network is up?
>
> };
> [18-01-28 16:58:44.7982] Slim::Networking::SqueezeNetwork::_error (431)
> Unable to login to SN: Co
castalla wrote:
> Thanks - I'll try it
Can find a rc.local - but lots of other locals
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chrome
slartibartfast wrote:
> I just added a line in rc.local to restart LMS after 30 seconds
>
> sleep 30;sudo /etc/init.d/logitechmediaserver restart
>
> or something similar.
>
> Sent from my Pixel 3a using Tapatalk
Thanks - I'll try it
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Sp
I recall a couple of posts about delaying LMS startup on boot, but no
real solution, if I recall.
Is there a way to do this on debian ?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe
slartibartfast wrote:
> So "Global" stations are only available in the UK.[emoji3]
>
> Sent from my Pixel 3a using Tapatalk
Seems to be hit'n'miss - LBC now plays outside UK. Alexa has a Global
Player skill, all stations play.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Tou
Same issue affected LBC in December - took Global/Tunein over A month to
fix ...
Classic FM Nederlands is better - not so many ads!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Air
slartibartfast wrote:
> Works for me from the Radio menu.
>
> Sent from my Pixel 3a using Tapatalk
OP probably means Classic FM from Global Media (classical). It's not
available via Tunein
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Be
Think it was down to a DNS error at router level.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo 2,3 and Show5,
I'm seeing this quite frequently in the last few days:
[20-02-20 22:28:56.5000]
Slim::Networking::SqueezeNetwork::Players::_players_error (377) Unable
to get players from SN: Couldn't resolve IP address for:
www.mysqueezebox.com, retrying in 900 seconds
[20-02-20 23:14:03.2620] Slim::Networking:
mherger wrote:
> > I know how to mount a nas share in linux and windows ... but how is
> this
> > done for macos? Any how-to ?
>
> Select the "Go To/Connect to Server" from Finder's menu. You can then
> drag this connection to the "Login Items" in the user's settings to
> auto-mount the shar
I know how to mount a nas share in linux and windows ... but how is this
done for macos? Any how-to ?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Aud
The simplest way to get LMS on a Pi is to install either Picoreplayer or
Max2Play.
Here are the 'official' guides:
Max2Play - https://www.max2play.com/en/wiki/starter-guide/
Picoreplayer - https://www.picoreplayer.org/main_getting_started.shtml
[Official LMS installation software is at
http
rkrug wrote:
> Hi
>
> I can't find the announcement for LMS 8.0 (searching for "LMS 8.0"
> yields no results) - can somebody point me to it, or to the changes in
> this version compared to the nightly releases?
>
> Thanks,
>
> Rainer
http://downloads.slimdevices.com/nightly/index.php?ver=8.0
noexit wrote:
>
>
> Should PiCoreplayer be a part of this setup? I feel like I'm missing
> what PiCoreplayer actually is. Is it simply a stripped down OS that
> only runs LMS and or Squeezeplay/Jive? Or does it run on top of
> Raspian?
>
> I really appreciate all you folks do and I sincerel
7.9.2
http://downloads.slimdevices.com/nightly/index.php?ver=7.9
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo
Man in a van wrote:
> Plenty :)
>
> I use the 4gb but utilise the Raspbian Desktop OS and run a seperate
> Spotify-Connect client, Samba (I have my music library on the same SD
> card) and some other stuff.
>
> ronnie
Thanks. I have everything on a pi zero which works fine, but ran into
a
SpiderJon wrote:
> Thanks for that info castella. That update now successfully installed
>
>
> I guess by "latest" I meant the most recent one that had appeared in my
> LMS web UI:
>
> 28786
>
> Fwiw, the problem with logitechmediaserver_7.9.2~1576322676_arm.deb is
> that it was 0 bytes.
SpiderJon wrote:
> I just got a notification that "A new version of Logitech Media Server
> is available. (Click here)"
>
> So, I followed the usual instructions - ie,
>
> > > >
- Run the following command to execute the installer
- sudo dpkg -i
>
/var/lib/squeezeboxserver/cache/up
LMS only - is 2gb Pi4 sufficient? 4gb is 20 euro more expensive.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nest Hub, Amazon Echo
d6jg wrote:
> Yes 90 days but it is only usable by 2nd Gen Echos and via their player
> on a PC or Smartphone app.
>
> Ive not tried MyMedia skill as my reading of it suggested that it
> doesnt appear as a controllable player in LMS whereas Mediaserver does
> by virtue of its use of stream.mp
d6jg wrote:
> https://www.amazon.co.uk/b?ie=UTF8&node=3022219031
Is there a free trial for HD.
Maybe contact MyMedia authors to see what they actually offer for flac
files - maybe they've changed the specs. They're slow to respond in my
experience.
LMS server: Pi Zero
Amp: Denon PMA-50
d6jg wrote:
> The stream commands invoke stream.mp3 which is limited to mp3
> If there was a stream.flc Im sure the Mediaserver skill could be easily
> modified to invoke it instead of mp3 its the changes required on LMS
> that might be a show stopper.
>From MyMedia settings:
Echo devices do
d6jg wrote:
> As phillchillbill has managed to make his Mediaserver skill for Alexa
> play LMS via stream.mp3 I am now wondering what would be required to
> implement steam.flc or stream.flac in order to make an Echo into a high
> res player.
> @Michael is this a possibility?
I think the MyMedi
Moonbase wrote:
> Someone else please chime in, because I almost forgot
I installed it
> with Ubuntu 10.04 or 11.04 (?) and have it and the OS only upgraded
> since. So now I reckoned itd be time for a clean new install to the
> current (or next) LTS version.
>
> I seem to remember installing
mherger wrote:
> > It may be coincidental, but with 7.9.2 - 1574315728 I've been
> > experiencing issues with radio streams on chromecast bridge -
> stations
> > not showing artwork and streams failing. The LMS update was the
> only
> > change in the last 48 hours.
>
> Yeah, that should be co
mherger wrote:
> > For testing I need to revert the latest nightly to the previous
> > version. Where can I download the appropriate file?
>
> http://downloads-origin.slimdevices.com/nightly/7.9/sc/
>
> What are you expecting to see? Any issues with the latest?
>
> --
>
> Michael
Thanks.
For testing I need to revert the latest nightly to the previous
version. Where can I download the appropriate file?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Googl
Works okay on my SB Radio using latest 7.9.2
It's an AAC stream.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Home Mini, Pioneer WX-SMA1, Roberts S1, O2 Joggler,
So, WHICH station?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Home Mini, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisco Joggler
Brexit = ∞ stupidity
---
slartibartfast wrote:
> If you mean that the bottom of the artwork is cut off I see the the same
> with Talksport in the UK. The artworks look perfectly square to me on
> other interfaces. If you change the now playing view to small artwork in
> screen settings the NDR1 artwork almost fills the
Recently the German stations (SWR 1 and NDR 1, maybe others) have
changed their station logos. Since the change, the artwork (logo and
track art) no longer fit the Controller screen correctly. The images
seem marginally too big. This is only apparent on the Controller
screen.
Could somebody
I stumbled across an old Chromecast audio in a box of tangled wires ...
I set it up again (and accessed it via the chromecast plugin)
Excellent. I pushed the audio out to a mini Avantree Priva iii aptx BT
transmiiter. Sounds great on all the bt headphones I've tried. The
Priva has an extensive
kidstypike wrote:
> Not sure . . . where have you stored your custom wallpaper files?
>
> Does a small picture of the custom wallpaper appear on the plugin
> settings page, as in my picture above?
>
> Which player are you trying?
Fixed it! It was a problem with the file location and permissi
castalla wrote:
> I'll give it a try!
Spent hours trying this no custom wallpaper appears on player
settings !
Replicated your settings apart from file location.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Li
kidstypike wrote:
> I would assume so!
I'll give it a try!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Home Mini, Pioneer WX-SMA1, Roberts S1, O2 Joggler, Cisc
kidstypike wrote:
> Required sizes vary depending on which device the are to be used on, and
> are in the plugin settings, but will include here.
>
> WALLPAPER FILES SHOULD BE 240X320 (CONTROLLER), 320X240 (SQUEEZEBOX
> RADIO) OR 480X272 (SQUEEZEBOX TOUCH) PIXEL .JPEG, .JPG, .PNG OR .BMP
> FILE
kidstypike wrote:
> Sure is, LMS plugin "Customise Device".
>
> 28059
>
> 28060
>
> 28061
What dimensions should I use?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker,
I'd like to have a choice of simple colour wallpapers ... for
squeezeplay (and radios). Possible?
Any 'tutorial' anywhere?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker,
NE5 wrote:
> Assuming the SB is bust and I can't fix it ?
As I understand it, you still need a reliable LMS setup. Remind us -
where is your music stored?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos, Libratone Zipp, GGMM
E2 & E3, Yamaha WXAD-010,
NE5 wrote:
> I've seen raspberry pi magazines. Are they better than a squeezebox ?
>
> Ditto a Chromecast audio ? When it says plug a chromecast audio into
> "aux on your speakers", does it mean plug into "aux on your amplifier"
>
>
> I just want to stream music to my speakers via my
Apesbrain wrote:
> Good point! Sorry. Never occurred to me that Europe follows this same
> tradition.
Yes - we have a lot of new-fangled things too!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos, Libratone Zipp, GGMM
E2 & E3, Yamaha WXAD-010, Loewe
Apesbrain wrote:
> Clocks go back on Nov. 4.
Not in Europe !
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos, Libratone Zipp, GGMM
E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google Home Mini, Pioneer
WX-SMA1, O2 Joggler, Cisco Joggler
Brexit = ∞ st
I'm still having issues with artwork displaying for many streams ...
For example, live streams from Tunein show the correct image for LBC
(from
https://www.mysqueezebox.com/public/imageproxy?u=http%3A%2F%2Fcdn-radiotime-logos.tunein.com%2Fp127601q.png&h=96&w=96
But SWR1 shows a generic (from
mar...@gregorie.org wrote:
>
> > Add the following 3rd party repo to the Plugins tab.
> >
> >
> http://downloads.sourceforge.net/project/bpaplugins/betarelease-repo.xml
> >[/color]
> Sounds easy enough, but all there is on the plugins tab is the
> following:
>
> ==
sbp wrote:
> Sorry, I don't know how the artwork and streaming is connected.
>
> For the danish radio streaming stations I don't remember ever to have
> seen track artwork. It always showed the logo for the station (or maybe
> sometime there was a logo for the special program).
>
> When playin
sbp wrote:
> Thanks for testing.
>
> It it has been working fine for a long time, I noticed the issue within
> the last week or so.
>
> I find it strange that the logo shows fine on the left side of my
> attached image, but no logo on the right side. So therefore I concluded
> that the metada
sbp wrote:
> Hi I have a similar problem that the logo for the live streaming radio
> station is not showing when playing the stream - however, the small
> logos are displayed fine when drilling down the menu using the "Radio"
> menu item.
>
> But as soon as I choose the radio station and it s
mherger wrote:
> Oh my... its been a rough week... Im getting tired [emoji58]. The App
> Gallery is installed by default, of course.
>
> I always ask people to check their server.log, because it often has good
> hints about what is going on in LMS.
Well, developments - I reinstalled a backu
mherger wrote:
> > LMS is showing App Galleryy under My Apps - when I select that page
> > returns 'This site can't be reached' ... ???
>
> Did you install that plugin? If not:
>
> https://forums.slimdevices.com/showthread.php?107165-IMPORTANT-Stop-forwarding-your-LMS-ports-to-the-internet!
>
I give up on this!
I've tried every possible variation ... changed routers, dns settings,
browsers, cleared cache ... two different lms setups ... and 2 different
networks
Is it something to do with the expired certificate problem reported
elsewhere?
Help!
LMS server: Pi Zero
Amp: Denon PM
castalla wrote:
> After a router reboot yesterday, all the live stream logos/artwork are
> messed up - just display the empty frame.
>
> This is with the LMS gui.
>
> The logos do display on the Touch screen.
>
> I've rebooted everything, tried different browse
After a router reboot yesterday, all the live stream logos/artwork are
messed up - just display the empty frame.
This is with the LMS gui.
The logos do display on the Touch screen.
I've rebooted everything, tried different browsers on different PCs -
still messed up gui display.
Any ideas?
mherger wrote:
> > Play live stream mp3 - eg. LBC UK - metadata displays current show
> > playing
> >
> > Play SWR1 - gui displays the metadata correctly ... for about 5 secs,
> > then the artwork (eg. station logo) is replaced with the artwork from
> > LBC UK. Other stream details are correc
Briefly:
Play live stream mp3 - eg. LBC UK - metadata displays current show
playing
Play SWR1 - gui displays the metadata correctly ... for about 5 secs,
then the artwork (eg. station logo) is replaced with the artwork from
LBC UK. Other stream details are correct.
Only occurs with mp3 strea
BenMation wrote:
> is it something like this ?
>
> //ipaddress/pathname/path/directory cifs
> credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777
> 0 0
Possibly!
Here's mine:
//192.168.0.1/volume9 /mnt/hd1/ cifs username=guest,password=
The 'nas' has an
BenMation wrote:
> is there a more 'elegant' way of configuring the system though? I am
> trying to implement this without anyone accessing the CLI of the server.
> For security purposes.
But it's a simple one-off setting by editing the fstab file. No need to
compromise any security.
Touch,
BenMation wrote:
> Hi there!
>
> I would like to ask if it is possible to add media from a remote
> location (i.e. network drive/NAS) to the 'My Music' Tab in LMS. I sort
> of made it happen by mounting the network drive to a directory within
> the server pc that hosts LMS. But this is very ted
karlek wrote:
> Sorry. Should have been
> >
Code:
> > ls -l /etc/dpkg/
> >
> with a trailing /
I've reimaged and reinstalled - all working okay now.
Thanks for the advice.
Touch, Logitech Radio, Logitech UE Radio, O2 Joggler + SqpOS
UPnPBridge
slartibartfast wrote:
> Are you updating manually or via the max2play "show available updates"
> built in updater?
>
> Sent from my SM-G900F using Tapatalk
I've always used the manual route.
Touch, Logitech Radio, Logitech UE Radio, O2 Joggler + SqpOS
UPnPBridge - 2 paired Sonos Play1 speak
1 - 100 of 196 matches
Mail list logo
