On Tue, 4 Nov 2003, Andy Dubey wrote:
I went though the quickstart guide and It still is giving me that error.
So I am clueless to what I am doing wrong with the configuration file.
Do you have the commands with out the comments of the commands that need
to be set from the Quick start,
On Wed, 5 Nov 2003, melvin melvin wrote:
While trying to retrieve the URL: http://14.5.1.100/cgi-bin/chpasswd.cgi
The following error was encountered:
(111) Connection refused
Then there is no web server running on 14.5.1.100 or there is firewalling
preventing Squid from reaching this
On Wed, 5 Nov 2003 [EMAIL PROTECTED] wrote:
I have configured squid 3, I have a parent proxy that must be used
I think this will help you:
Squid FAQ 4.8 How do I configure Squid to work behind a firewall?
url:http://www.squid-cache.org/Doc/FAQ/FAQ-4.html#ss4.8
Regards
Henrik
On Wed, 5 Nov 2003, Andrew wrote:
I am running a squid server behind a firewall.
Problem is the network slows down to a crawl. Including
web traffic and traffic within the network. The network
becomes ok when i remove the squid box from being inline.
Sounds as like there is a networking
Hi,
One of our customer has problems to do online ordering at one of his
suppliers.
He starts at the suppliers URL, then he goes to the order-section. After
he gave in his username and password he is directed to some
https-pages on another Server. At this pages he has to upload a textfile
Hi,
I have in squid,
http_port 192.168.10.100:3128
But people in the office can browse the net using 192.168.10.100 and
port too.
Plus they can brose without giving a port number, but just the ip of
proxy.
How can I stop that? Do I need to give any more info? What? It is simple
out-of-box
You need to set Access control
http://www.squid-cache.org/Doc/FAQ/FAQ-10.html for further ref.
Regards,
Milind
-Original Message-
From: Payal Rathod [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 05, 2003 2:55 PM
To: squid
Subject: [squid-users] fastening squid to a port: problem
The Version of Squid is 2.4.STABLE3. OS is SuSE Linux 8.0 Kernel
2.4.18-4GB.
Transparent proxying isn't used.
I didn't find anything in the FAQ which could lead to a solution :-(
The wierd thing is, that everything works, but not the message
displaying, wich goes over https or http as all the
Dirk Spiekermann wrote:
The Version of Squid is 2.4.STABLE3. OS is SuSE Linux 8.0 Kernel
2.4.18-4GB.
Transparent proxying isn't used.
I didn't find anything in the FAQ which could lead to a solution :-(
The wierd thing is, that everything works, but not the message
displaying, wich
Well, if it is the only possibility I'll have to try it.
Thanks so far...
--
Mit freundlichen Grüßen,
Dirk Spiekermann
NETSIDE ONLINE SERVICE
technische Abteilung
Tel.: 02562 / 93 98 0
Fax: 02562 / 93 98 11
http://www.netside.de
mailto: [EMAIL PROTECTED]
Dirk Spiekermann wrote:
Well, if it is the only possibility I'll have to try it.
Thanks so far...
It's a kind of generalising answer, but the thing is also
there is quite or no effective support left for 2.4 releases,
hence the classical sentence.
M.
On Wed, 2003-11-05 at 20:43, Marc Elsen wrote:
Dirk Spiekermann wrote:
Well, if it is the only possibility I'll have to try it.
Thanks so far...
It's a kind of generalising answer, but the thing is also
there is quite or no effective support left for 2.4 releases,
hence the
Henrik I'm testing ntlm_auth shipped with samba 3.
I want to discuss these issues:
1) ntlm-ssp protocol seems to be not used from IE, testing with win2003,
latest IIS if leaving only this in squid.conf:
auth_param ntlm program
/usr/squid/libexec/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
On Wed, 5 Nov 2003, Payal Rathod wrote:
I have in squid,
http_port 192.168.10.100:3128
But people in the office can browse the net using 192.168.10.100 and
port too.
Plus they can brose without giving a port number, but just the ip of
proxy.
Most likely their clients are using port
On Wed, 5 Nov 2003, Raja R wrote:
Can you pls explain the cache_swap_low and cache_swap_high params w.r.t the
performance and if I can tune up any other params to speed up my proxy
server ?
Not really related to performance. Just parameters used when maintainign
the already cached content
Then, what would be my problem ???
I tested my wb_group and it is working too...
I think I forgot to put my configuration: Debian woody, Samba 2.2.8,
SQUID 2.5 STABLE4.
With just on request on the browser, I get:
look, I put debug_options 29,9 and debug_option 23,9 and debug_options
28,9
I made a simple one, to always return OK, I called null_auth.sh, but
there's a little problem: when I kill -15 squid, it cannot kill my
authenticators.
Does squid send some caracter, or string to it to make it die ?
Here is the code:
#/bin/ksh
while true
do
read usuario
echo
what are the advantages using ntlm_auth shipped with samba3
instead of the same shipped with squid ?
The one shipped with Squid will not work with Samba 3, whereas the one
that ships with Samba 3 will. That's a big advantage. :)
Better using it with samba 2.2.8a, wb_group and wb_ntlmauth
Adam,
If you read the rest of the email I sent, you will see te test I did
and put my squid cache.log with full debug on Authenticators and ACLs.
Alex
Adam Aube wrote:
Then, what would be my problem ???
From what you've told us, nothing - you never described any
operational problems
If you read the rest of the email I sent, you will see te
test I did and put my squid cache.log with full debug
I did read your entire email, and I saw no errors in the cache.log.
So I ask again, what problems are you observing with your Squid cache?
Adam
On Wed, Nov 05, 2003 at 11:37:15AM +0100, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
I have in squid,
http_port 192.168.10.100:3128
But people in the office can browse the net using 192.168.10.100 and
port too.
Plus they can brose without giving a port
Adam, I'm afraid you're wrong.
ntlm_auth shipped with squid 2.5 latest tarrball work perfectly with
samba3!!
:-(
I'm going mad...
- Original Message -
From: Adam Aube [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, November 05, 2003 2:53 PM
Subject: RE: [squid-users]
Hi!
I would like to thanks for the answers to my previous post.
Now I have 2 questions. Fist the important one:
1- I made some authentication tests and when the username has no dot
it goes fine, but the username pattern is firstname.lastname (with a
dot between first and last name), so I get
Hello,
In my company, we use in our DMZ squid and the product trendmicro viruswall in
the following way.
corp. network - Squid - viruswall - Internet
The proxy squid listening on port 3128 and viruswall listening 3128 for HTTP
traffic and port 21 for FTP traffic.
HTTP request -squid 3128 -
The -SQUID- ntlm_auth helper doesn't need samba at all. It is essentially
the first generation ntlm helper and is stand alone. It has known
problems and from the general discussion here I doubt it will see any
further development(but I'm not a squid developer).
The squid wb_* helpers are the
I could use some guidence configuring my squid installation with a Windows
2000 Active Directory forrest. I have read the past posts as well as the
man page. I am very new to LDAP and will admit have not gotten my arms
around it yet.
My windows domain lives in an Active Directory Forrest my
The -SQUID- ntlm_auth helper doesn't need samba at all.
It is essentially the first generation ntlm helper and
is stand alone.
I (stupidly) assumed that the OP was referring to wb_ntlmauth. I had
forgotten about the other NTLM auth helpers that Squid includes that
don't use Samba. My mistake.
In my company, we use in our DMZ squid and the product
trendmicro viruswall
The proxy squid listening on port 3128 and viruswall
listening 3128 for HTTP traffic and port 21 for FTP
traffic.
HTTP request -squid 3128 - 3128 viruswall - Internet
FTP request - 21 viruswall - Internet
But
On Wed, Nov 05, 2003 at 03:58:48PM +0100, Martial Paupe wrote:
In my company, we use in our DMZ squid and the product trendmicro
viruswall in the following way.
corp. network - Squid - viruswall - Internet
The proxy squid listening on port 3128 and viruswall listening 3128 for HTTP
Long time listener, first time caller.
On devel.squid-cache.org, I see the WCCPv2 support link, that refers me to
the visolve page. On that page, I see a patch for the kernel, which I
applied to the kernel source tree. (Patch indicates that it for 2.4.18 and
above, the source tree from
On Wed, 5 Nov 2003, Lombardo Federico wrote:
Adam, I'm afraid you're wrong.
ntlm_auth shipped with squid 2.5 latest tarrball work perfectly with
samba3!!
The Squid-2.5 ntlm_auth does not at all use Samba. It uses SMB to a NT
server of choice.
The Squid-2.5 ntlm_auth is generally
On Wed, 5 Nov 2003, Jerry Murdock wrote:
The -SQUID- ntlm_auth helper doesn't need samba at all. It is essentially
the first generation ntlm helper and is stand alone. It has known
problems and from the general discussion here I doubt it will see any
further development(but I'm not a squid
On Wed, 5 Nov 2003, Alex Carlos Braga Antão wrote:
Does squid send some caracter, or string to it to make it die ?
Squid closes the input to the helper.
Here is the code:
#/bin/ksh
while true
do
read usuario
echo OK
done
Thanks...
This should be
On Wed, 5 Nov 2003, Elton S. Fenner wrote:
1- I made some authentication tests and when the username has no dot
it goes fine, but the username pattern is firstname.lastname (with a
dot between first and last name), so I get error on authentication. Is
there a way too authenticate such users?
On Wed, 5 Nov 2003, Steve Fischer wrote:
I also see a patch for the squid code, indicating it is for squid-2.5-PRE7.
I am running squid-2.5-STABLE4. Is this patch still required on the more
recent version I am running?
The patch is still required.
Also, the squid.conf file refers to WCCP
On Wed, 5 Nov 2003 [EMAIL PROTECTED] wrote:
I could use some guidence configuring my squid installation with a Windows
2000 Active Directory forrest. I have read the past posts as well as the
man page. I am very new to LDAP and will admit have not gotten my arms
around it yet.
My windows
Adam,
When I open the browser (IE) it asks me for username, password and
Domain.
I cannot find where the problem is, because winbind is working,
wb_auth is working, wb_group is working... wb_ntlmauth should be working
too...
it could be a way to make wb_ntlmauth log more on squid logs
On Wed, 5 Nov 2003 [EMAIL PROTECTED] wrote:
I have done a find command and I found that the openssl headers are in
/usr/local/ssl/include/openssl/ directory. So, I ran the following command
./configure --enable-ssl --with-openssl=/usr/local/ssl/include/openssl and
when I run MAKE, I
Please keep the mailing list Cc'ed!
On Wed, Nov 05, 2003 at 04:55:05PM +0100, Martial Paupe wrote:
HTTP request -squid 3128 - 3128 viruswall - Internet
HTTP request -squid 3128 - 21 viruswall - Internet
You could use ACLs with the cache_peer directive. However from my own
experience I
When I open the browser (IE) it asks me for username,
password and Domain.
1) When you use the wbinfo -a test, do you see both a plain text and
challenge response line?
2) What version of IE (including service pack level) are you using?
3) Does this happen all the time, or some of the time?
Hi Adam,
I have similar problems.
1) I only see the plaintext line. NO challenge respnse line!
2) IE6 6.0.2600.IC
3) it happens all the time
Is it okay to write under that topic, or do I have to create a new posting? I have the
same probs like Alex.
thx tommy
I have similar problems.
1) I only see the plaintext line. NO challenge respnse line!
Then Winbind (part of Samba) was not built with support for
challenge-response, and NTLM won't work.
See the Squid FAQ for more details:
http://www.squid-cache.org/Doc/FAQ/FAQ-23.html#ss23.5
Adam
Sorry, my mistake
squid 2.4.7
samba 2.2.8
This lines included in squid.conf
--- begin ---
authenticate_program /usr/local/bin/smb_auth -W MYDOMAIN
acl domainusers proxy_auth REQUIRED
http_access allow domainusers
--- end ---
I have made a test with browser and usernames with dot get failed,
Hi folks,
I installed squid2 in my freebsd server. I am using ipfw to redirect
packages from my clients to squid port into my server.
I am testing with only client and the http access is very slow with proxy.
If I try to access a website with client no proxy configurated the access is
10 times
We are a school that has internet filtering though our ISP. They have a proxy server
that we want to Cache locally at our site.
Since they handle our filtering we need to set our squid server so it only request
information from their server and so it will
never go to the internet for the
I have made a command test, here is the output
--- begin ---
# /usr/local/bin/smb_auth -W MSRS -d
firstname.lastname mypassword
Domain name: MYDOMAIN
Pass-through authentication: no
Query address options:
Domain controller IP address: 10.151.1.1
Domain controller NETBIOS name: SFCTRS1
Contents
On Wednesday 05 November 2003 5:09 pm, Eicke wrote:
Hi folks,
I installed squid2 in my freebsd server. I am using ipfw to redirect
packages from my clients to squid port into my server.
I am testing with only client and the http access is very slow with proxy.
If I try to access a website
Rui,
Thanks for the directions you gave us !!!
We have already managed how to install, configure and run Squid / ICAP /
Symantecs Scan Engine, using squid-icap-client available in
https://sourceforge.net/project/showfiles.php?group_id=47737 with no other
options in the ./configure step.
Rui,
Thanks for the directions you gave us !!!
We have already managed how to install, configure and run Squid / ICAP /
Symantecs Scan Engine, using squid-icap-client available in
https://sourceforge.net/project/showfiles.php?group_id=47737 with no other
options in the ./configure step.
Thomas,
With winbind you do not have a file with the users. wb_group is an
external acl that gets the users on a group you define on your AD.
The basics to configure it is:
1) install and configure samba (note: it must be configure with
security=domain, encrypt passwords=yes).
Adam, that is it... I tested here... I didn't know it was not compiled
with NTLM
I will compile it right now
The same as Thomas
thanks !!!
Adam Aube wrote:
When I open the browser (IE) it asks me for username,
password and Domain.
1) When you use the wbinfo -a test, do you
Since they handle our filtering we need to set our squid
server so it only request information from their server
and so it will never go to the internet for the information.
See the Squid FAQ for forwarding all requests to another proxy:
http://www.squid-cache.org/Doc/FAQ/FAQ-4.html#ss4.9
On Wed, Nov 05, 2003 at 04:30:03PM +0100, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
The problem is that they can browse alright, but the acls I have defined
do not work. e.g. I don't allow access to hotmail and yahoo but when
they remove the port, they are allowed to
Hi folks,
I did get block sites access with the following acls:
acl blockedsites url_regex /usr/local/squid/etc/bloqueados/block.txt
acl unblockedsites url_regex /usr/local/squid/etc/bloqueados/unblock.txt
acl all src 0.0.0.0/0.0.0.0
acl local src 192.168.5.0/255.255.255.224
acl manager proto
I did get block sites access with the following acls:
http_access allow local
http_access allow unblockedsites all
http_access deny blockedsites all
http_access deny all
You allow local before you deny blockedsites. Rewrite these rules as:
http_access deny blockedsites !unblockedsites
On Wed, 5 Nov 2003, Payal Rathod wrote:
Thanks for the mail. Well, I have only one proxy running, and webserve
ris on 80. But I believe I mentioned port 0? What might be the reason
that squid behaves taht way when port is set to 0 or none?
It is not possible to use port 0.
What I think is
Hi !!
I noticed that Squid 2.6 (development) doesn´t come with the wb_ntlmauth
helper
What is the best way to do ntlm authentication in Squid 2.6?
Thanks in Advance,
Carlos.
_
Voce quer um iGMail protegido contra vírus e spams?
Hi !!
I noticed that Squid 2.6 (development) doesn´t come with the wb_ntlmauth
helper
What is the best way to do ntlm authentication in Squid 2.6?
Thanks in Advance,
Carlos.
_
Voce quer um iGMail protegido contra vírus e spams?
Hi!
I am trying the 2.6 ICAP enbled version of Squid, and I noticed that it
doesn´t come with the wb_ntlmauth helper with it
Which is the best way to do ntlm authentication with Squid 2.6?
thanks in advance,
Carlos.
_
Voce quer
I am running 3.0-PRE3-20031002 in accelerator mode on port 80 with apache on
port 81.
Here are the headers when fetching a page straight from apache:
HTTP/1.1 200 OK
Date: Wed, 05 Nov 2003 20:23:51 GMT
Server: Apache/1.3.28 (Unix)
Cache-Control: max-age=86400
Hi,
I actually have 2 different questions.
1st. I have squid starting in a cron job with the
command [EMAIL PROTECTED] /some/where/RunCache Now this
starts the service but the process doesnt change
users it runs as root.
2nd. after boot no one can connect to the internet
through the proxy.
Probably the latest stable release.
So there is no definitive yes, it's stable in version X?
If not, what are your experiences ?
No experience of it yet, but I've inherited a set of Squid
recommendations from a past colleague, including implementation of async
i/o. As this is 2.4.STABLE7
On Wed, 5 Nov 2003, Eicke wrote:
I installed squid2 in my freebsd server. I am using ipfw to redirect
packages from my clients to squid port into my server.
I am testing with only client and the http access is very slow with proxy.
If I try to access a website with client no proxy
On Wed, 5 Nov 2003, Eicke wrote:
FATAL: Bungled squid.conf line 602: cache_dir ufs /usr/local/squid/cache 400
16 256 Q1=72 Q2=64
You have a syntax error in your squid.conf. The ufs cache_dir type does
not have any Q1/Q2 parameters, these are known to the diskd cache_dir type
only.
Edit
On Wed, 5 Nov 2003, Alex Carlos Braga Antão wrote:
2) type : man winbindd it gives you a complete way to install
your winbind daemon. It is not necessary to configure PAM, but do not
forget to copy the lib_nsswinbind.so (and the link) to /lib directory
NSS is stricly speaking not
On Wed, 5 Nov 2003 [EMAIL PROTECTED] wrote:
I am trying the 2.6 ICAP enbled version of Squid, and I noticed that it
doesn´t come with the wb_ntlmauth helper with it
What 2.6 version of Squid? There is no 2.6 version of Squid. There is 2.5
and the next version is 3.0 (under development).
On Wed, 5 Nov 2003, Alex Carlos Braga Antão wrote:
Adam,
When I open the browser (IE) it asks me for username, password and
Domain.
I cannot find where the problem is, because winbind is working,
wb_auth is working, wb_group is working... wb_ntlmauth should be working
too...
it
On Thu, 2003-11-06 at 08:39, [EMAIL PROTECTED] wrote:
Probably the latest stable release.
So there is no definitive yes, it's stable in version X?
If not, what are your experiences ?
No experience of it yet, but I've inherited a set of Squid
recommendations from a past colleague,
If at all possible, please do upgrade to 2.5.
That's always been my recommendation, but things move very slowly here
that's why I need to try to keep things in a safe state prior to upgrading.
Regards
Jeff
--
Jeff Richards
Technical Consultant
Unix Enterprise Services
[EMAIL PROTECTED]
On Thu, 6 Nov 2003 [EMAIL PROTECTED] wrote:
So there is no definitive yes, it's stable in version X?
It has been considered stable by the devopers since Squid-2.2 something.
There is at this time no known bugs in the aufs implementation of
Squid-2.5.STABLE4, and very many uses aufs in very
Ok still stumped,
I run the following as asked with the following output:
ldapsearch -x -h 10.61.1.248 -b -s base namingContexts
# extended LDIF
#
# LDAPv3
# base with scope base
# filter: (objectclass=*)
# requesting: namingContexts
#
#
dn:
namingContexts: DC=bdmn,DC=foo,DC=com
Thanks Henrik/Marc
My recommendation is going to be that any implemenation of async i/o is
delayed and incorporated into a general upgrade of Squid to the latest
stable release.
Regards
Jeff
--
Jeff Richards
Technical Consultant
Unix Enterprise Services
[EMAIL PROTECTED]
Tel: +61 2 6219 8125
On Thu, 2003-11-06 at 07:56, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
Thanks for the mail. Well, I have only one proxy running, and webserve
ris on 80. But I believe I mentioned port 0? What might be the reason
that squid behaves taht way when port is set to 0 or
On Thu, 2003-11-06 at 08:11, Y Jones wrote:
I am running 3.0-PRE3-20031002 in accelerator mode on port 80 with apache on
port 81.
Here are the headers when fetching a page straight from apache:
HTTP/1.1 200 OK
Date: Wed, 05 Nov 2003 20:23:51 GMT
Server: Apache/1.3.28
On Wednesday 05 November 2003 10:26 pm, Robert Collins wrote:
On Thu, 2003-11-06 at 07:56, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
Thanks for the mail. Well, I have only one proxy running, and webserve
ris on 80. But I believe I mentioned port 0? What might be the
On Wednesday 05 November 2003 05:10 pm, Henk-Jan \(squid\) wrote:
I have succesfully setup ntlm group auyhentication (squid 2.5 and Samba
3), and tested it with Windows 2000 cliënts.
Then I tested it with 95/98 cliënts: No go! I need to athenticate manually!
What operating system is your
On Wed, 5 Nov 2003, Squid Users wrote:
Ok still stumped,
namingContexts: DC=bdmn,DC=foo,DC=com
namingContexts: CN=Schema,CN=Configuration,DC=foo,DC=com
namingContexts: CN=Configuration,DC=foo,DC=com
auth_param basic program /usr/local/squid/bin/squid_ldap_auth -u cn -b
On Thu, 6 Nov 2003, Robert Collins wrote:
I encountered a weird corruption issue with aufs on solaris with squid
2.4stable X. I suggest you use diskd.
Squid-2.5.STABLE1 and earlier (as far back as at least 2.3, maybe 2.2 as
well) have known issues where aufs can cause data corruption.
I'm running Squid 2.x on a Smoothwall box in a home network. I'm trying
to connect to the Cisco VPN concentrator at work via a TCP tunnel on
port 80.
With the squid server running as a transparent proxy, it won't connect.
If I turn off squid, it connects without problem. I've tried various
On Thu, 2003-11-06 at 10:34, Henrik Nordstrom wrote:
On Thu, 6 Nov 2003, Robert Collins wrote:
I encountered a weird corruption issue with aufs on solaris with squid
2.4stable X. I suggest you use diskd.
Squid-2.5.STABLE1 and earlier (as far back as at least 2.3, maybe 2.2 as
well)
I have installed squid 3 and was wondering if anyone knew how to make squid and
squidclient run from anywhere in a terminal window. Currently to run squid or any of
the program executables I first have to go into the directory the executable is
contain in (e.g. 'cd /usr/local/squid/sbin') and
Hi All,
We are currently looking at going AD on win2003 (aargh, not sure i want to
do this). at the moment we have a Winnt 4 domain and squid is nicely auth
against the domain controllers with NTLM. my question is can i continue to
use NTLM agains't win2k3 AD domain (or forest i think it's
On Thu, Nov 06, 2003 at 09:26:38AM +1100, Robert Collins wrote:
On Thu, 2003-11-06 at 07:56, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
Thanks for the mail. Well, I have only one proxy running, and webserve
ris on 80. But I believe I mentioned port 0? What might be
Found it...Thank you.
Is this patch (wccpv2.patch) still considered beta? Is support for wccp2
going to be included in the squid 3.0 release?
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 05, 2003 10:53 AM
To: Steve Fischer
Cc: [EMAIL
http://www-3.ibm.com/e-business/doc/content/lp/prodigy.html?P_Site=S94
Cheers,
fritz www.mesedilla.com
---
+ Basta Ikaw Lord
--
This email and any files transmitted with it are confidential and
intended solely for the use
On Wednesday 05 November 2003 05:10 pm, Henk-Jan \(squid\) wrote:
I have succesfully setup ntlm group auyhentication (squid 2.5 and Samba
3), and tested it with Windows 2000 cliënts.
Then I tested it with 95/98 cliënts: No go! I need to athenticate
manually!
What operating system is
On Thu, Nov 06, 2003 at 05:26:38AM +0700, Robert Collins wrote:
On Thu, 2003-11-06 at 07:56, Henrik Nordstrom wrote:
On Wed, 5 Nov 2003, Payal Rathod wrote:
Thanks for the mail. Well, I have only one proxy running, and webserve
ris on 80. But I believe I mentioned port 0? What might be
Hi all,
Just thought I'd close this thread.
I installed squid 2.5 with dlmalloc and found that I
could use MSN messenger but the speed improved only slightly.
My proxy was checking for a list of pornographic
sites (4000+ in all) and the format I was using was
acl porn dstdom_regex -i
[EMAIL PROTECTED] wrote:
I have installed squid 3 and was wondering if anyone knew how to make squid and
squidclient run from anywhere in a terminal window. Currently to run squid or any of
the program executables I first have to go into the directory the executable is
contain in (e.g.
On Thu, 6 Nov 2003, Kusuma Samorthong wrote:
My name is Ae. Now I'm studying at King Mongkut's Institute of Technology
Ladkrabang in Thailand. I'm making project about squid. I want to know
detail about squid following.
1. squid process? for example, flowchart. What is each process have
90 matches
Mail list logo