Hi, squid-users !
Issue: squid falls once a day.
Log contains the following lines:
FATAL: Received Segment Violation...dying.
2004/07/23 08:17:29| Not currently OK to rewrite swap log.
2004/07/23 08:17:29| storeDirWriteCleanLogs: Operation aborted.
CPU Usage: 1.435
On Tue, 20 Jul 2004, Mark Tinka wrote:
that's good to hear.. if gre isn't a must_have
requirement, then things should go smoother..
in fact ip_wccp is mutually exclusive with the ip_gre module. Only one of
them must be loaded at a time as both claims to implement the GRE
protocol.
Regards
On Fri, 25 Jun 2004, dravya wrote:
When Squid does a DNS lookup, where does it save the cached entries? I know you can
specify how many entries you want it to save but where does it actually save it on
disk?
In memory only.
It relies on the DNS server for more long-term caching of DNS just
On Mon, 12 Jul 2004, Marco Berizzi wrote:
I'm experimenting a problem with a web site because
X-Forwarded-For is unknown.
If the X-Forwarded-For header says unknown then you have set
forwarded_for off in squid.conf.
If it is completely missing then you have denied it from header_access.
On Sun, 25 Jul 2004, unixware wrote:
i follow the steps you mentioned when issuing
modprobe ip_wccp .but i get this errors
FATAL: Error inserting ip_wccp
(/lib/modules/2.6.5-1.358/kernel/net/ipv4/ip_wccp.ko):
Invalid module format
This is not where the instapp procedure will install the
On Thu, 17 Jun 2004, ndjidie fab wrote:
(110) Connection timed out
How could I fix this problem ?
Are you inside a firewall where you must use a parent proxy? If so have
you told this to Squid (not only the parent, but also that you are inside
a firewall)? See the FAQ.
Regards
Henrik
On Wed, 23 Jun 2004, [windows-1255] àéì ìåé wrote:
I'm looking for a way to control the HTTP headers coming from my squid.
today I use header_replace but I need to set different headers for different
locations on my site.
Then some coding is required to extend header_replace with some
On Mon, 26 Jul 2004, Huang, David wrote:
1) user has to enter username (UPN) and password I tried to use
sAMAccountName, instead of userPrincipalName, it works fine in the
command line for squid_ldap_auth, but NOT for using it in the
configuration file. I dont know why!
If it works from the
Hi there,
I am having a major problem getting Squid to authenticate from an ldap
server.
I have compiled squid to use ldap auth as a basic helper, and I get the
following error message, after I have typed in a username and password.
Command typed:
/usr/local/squid/libexec/squid_ldap_auth -b
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Monday, July 26, 2004 1:18 AM
To: Yaraghchi, Stephan
Cc: [EMAIL PROTECTED]
Subject: Re: [squid-users] Problem with Squid and COSS storage scheme
On Wed, 14 Jul 2004, Yaraghchi, Stephan wrote:
I ran
Thanks
There no other solution than recompile squid ?
I never did it and I'm afraid about this.
L.G.
-Ursprüngliche Nachricht-
Von: Elsen Marc [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 26. Juli 2004 10:30
An: Gix, Lilian (BR/PII3) *; [EMAIL PROTECTED]
Betreff: RE: [squid-users] out
Hello
I have two questions.
I discovered cache manager outputs and found that just 5-7% of hits
are served from cache. It is to few. I there any way to increase this
ratio ? My config is bellow.
Second question is about images. Sometimes, images are not loaded.
Mozilla FireFox says
Thanks
There no other solution than recompile squid ?
No.
I never did it and I'm afraid about this.
Afraid, is a meaningless concept in the complex
IT-ages we are living in.
Have for instance some test and play installations
with squid. You will learn a lot when trying this.
Hello
I have two questions.
I discovered cache manager outputs and found that just
5-7% of hits
are served from cache. It is to few. I there any way to increase this
ratio ? My config is bellow.
Your cache size is 500Mb. Depending on number of users and their
webprofile
Elsen Marc wrote:
Hello
I have two questions.
I discovered cache manager outputs and found that just
5-7% of hits
are served from cache. It is to few. I there any way to increase this
ratio ? My config is bellow.
Your cache size is 500Mb. Depending on number of users and their
I was afraid of doing things like that, i mean i use
to think that if things are working at their minimum
even, than let them work, do not touch them. But this
thing brings a huge fall in one learning curve, so
better should leave the fear away. Read the FAQ do a
complete research, and then you
My squid(s) are on RedHat 7.3 and Red Hat 9
-Ursprüngliche Nachricht-
Von: Mohsin Khan [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 26. Juli 2004 12:38
An: Gix, Lilian (BR/PII3) *; [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Betreff: Re: AW: [squid-users] out of filedescriptors
I was afraid
Elsen Marc wrote:
...
My worst problem is about images. I realy don't have any
idea, why some
images are not loaded :-( Do You think taht cache size a memory uasge
can be a reason ?
I don't think so.
Yet I don't have this problem , and I don't have an immediate hint
as what the reason
...
My worst problem is about images. I realy don't have any
idea, why some
images are not loaded :-( Do You think taht cache size a memory uasge
can be a reason ?
What logged for those images in your access.log ?
Can you show us some entries ?
--
Best regards,
maes
Thanks.
I tried 2.5.STABLE6 and have the same problem. Has anyone else dealt
with NTLM over the internet through squid?
-Original Message-
From: Elsen Marc [mailto:[EMAIL PROTECTED]
Sent: Saturday, July 24, 2004 9:46 AM
To: Jeff Heckart; [EMAIL PROTECTED]
Subject: RE: [squid-users]
For 7.3 the procedure is as described in FAQ, but for
9, it is slightly changes, /usr/include/bits/types.h
instead of this file you have to edit another file,
and I do not remember it yet...but i will check and
can post on the list.
--- [EMAIL PROTECTED] wrote:
My squid(s) are on RedHat 7.3 and
I have read and read and I have but come up with
nothing. I can't seem to get ntlmssp to work. I can
get the basic to work fine but no luck with ntlmssp.
Squid starts up fine but I get a The page cannot be
displayed everytime. Here is my squid.conf
hierarchy_stoplist cgi-bin ?
acl QUERY
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
Elsen Marc wrote:
I have two questions.
I discovered cache manager outputs and found that just 5-7% of hits
are served from cache. It is to few. I there any way to increase this
ratio ? My config is bellow.
Your
Merton Campbell Crockett wrote:
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
As an aside, you may want to check the configuration of a browser that
fails to load the images. Internet Explorer, Netscape, Mozilla, etc. have
a security feature that prohibits the loading of images that come
On Mon, 26 Jul 2004, Mohsin Khan wrote:
For 7.3 the procedure is as described in FAQ, but for
9, it is slightly changes, /usr/include/bits/types.h
instead of this file you have to edit another file,
and I do not remember it yet...but i will check and
can post on the list.
On neither do you
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
Merton Campbell Crockett wrote:
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
As an aside, you may want to check the configuration of a browser that
fails to load the images. Internet Explorer, Netscape, Mozilla, etc. have a
security
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
Thanks to answer. But cache manager says, usage of physical cache memory
( cache size ) is about 66%. 33% of cache size is free. Anyway, i will
try to increase cache size. I have tried to read FAQ obout mem.
requirements but don't understand
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
I think that it is not this case. First, i don't see broken image icon,
but small red cross in red square in MSIE. And sometimes pages are
loaded right and sometimes same page ha this problem :-(
Anything in cache.log when this happens?
What
On Mon, 26 Jul 2004, Johnny Doe wrote:
I have read and read and I have but come up with
nothing. I can't seem to get ntlmssp to work.
Samba version?
Have you verified the Samba instlallation using wbinfo as your
cache_effective_user?
The fgets Success warning on shutdown is normal and is a
On Mon, 26 Jul 2004 [EMAIL PROTECTED] wrote:
I have many time in cache.log the message :
WARNING! Your cache is running out of filedescriptors
And surfing is quite slow at this moment.
Are there a solution ?
See the Squid FAQ.
Regards
Henrik
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Mon, 26 Jul 2004, Johnny Doe wrote:
I have read and read and I have but come up with
nothing. I can't seem to get ntlmssp to work.
Samba version?
Have you verified the Samba instlallation using
wbinfo as your
cache_effective_user?
On Mon, 26 Jul 2004, Neil Wilson wrote:
Error:
squid_ldap_auth: sasl.c:83: ldap_sasl_bind: Assertion `ld != ((void *)0)'
failed.
Wtf... squid_ldap_auth asks for a simple bind, not a sasl bind. Looks like
the OpenLDAP version you are using is broken or they have changed the API
in manners
I am running squid2.5.stable5 on suse 9.0. I am trying to test my ldap
connection. Is there a log file somewhere that I can see what is going
on with the connection? I read a post the other day where they had
re-compiled squid with debug markers (probably not the right term). Do I
need to do that
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Mon, 26 Jul 2004, Johnny Doe wrote:
I have read and read and I have but come up with
nothing. I can't seem to get ntlmssp to work.
Samba version?
Have you verified the Samba instlallation using
wbinfo as your
cache_effective_user?
Hello,
maes wrote:
Hello Michal,
Monday, July 26, 2004, 3:18:16 PM, you wrote:
hmmm
what kind of connection to internet do you have?
is it stable? is there any packet loss?
I have Liesed line 512 kbps. Squid is siting on machine with 1GB of RAM
and 850 Mhz Duron processor. There is Cisco
Merton Campbell Crockett wrote:
On Mon, 26 Jul 2004, Michal Weinfurtner wrote:
I believe that MSIE uses the small red-cross in a square to indicate that
it did not or failed to download the content. If you have access to a
system that exhibits this behaviour, I would suggest grep'ping the
Johnny Doe wrote:
--- Henrik Nordstrom [EMAIL PROTECTED] wrote:
On Mon, 26 Jul 2004, Johnny Doe wrote:
I have read and read and I have but come up with
nothing. I can't seem to get ntlmssp to work.
Samba version?
Have you verified the Samba instlallation using
wbinfo as your
Yes the wbinfo -a run as user squid gives me back
plaintext password authentication succeeded
challenge/response password authentication succeeded
If I put squid-2.5-basic i get prompted for
username/password and everything works fine, it's just
squid-2.5-ntlmssp that I'm having problems with.
I usually start squid with a
./squid -N -d1
While testing stuff out. It make for a simple ctrl-c to stop it and change
the config file around. Your squid/var/log or wherever you specified you
wanted log files to go will have info too.
Chris
-Original Message-
From: Rick Whitley
Hi! when compiling squid 2.5Stable6 with samba support (3.0.5) I am
getting this error:
gcc -DHAVE_CONFIG_H -I. -I. -I../../../include -I../../../include
-I/SOURCE/samba-3.0.5/source -I/opt/OpenSSL-0.9.7d-i686/include/
-I/opt/EPA_SAMBAServer-3.0.5LDAP-1.0-i686/include/
-I/opt/gnome/include/ -O3
Victor Medina wrote:
Hi! when compiling squid 2.5Stable6 with samba support (3.0.5) I am
getting this error:
[error message snipped]
I am compilling with this configure:
[most configure options snipped]
--with-samba-sources=/SOURCE/samba-3.0.5
Am i doing something wrong?
Yes. With
-bash-2.05b$ wbinfo -a 465732%##
plaintext password authentication succeeded
challenge/response password authentication succeeded
465732 being the username and ## being the
password
--- Adam Aube [EMAIL PROTECTED] wrote:
Johnny Doe wrote:
--- Adam Aube [EMAIL PROTECTED] wrote:
Johnny
Johnny Doe wrote:
--- Adam Aube [EMAIL PROTECTED] wrote:
Johnny Doe wrote:
--- Adam Aube [EMAIL PROTECTED] wrote:
To clarify: as the user Squid runs as, have you used wbinfo -a to
perform an authentication test, and did you see success
for both plaintext and challenge response
THANXS! =) i just missed that! je!
On Mon, 2004-07-26 at 17:39, Adam Aube wrote:
Victor Medina wrote:
Hi! when compiling squid 2.5Stable6 with samba support (3.0.5) I am
getting this error:
[error message snipped]
I am compilling with this configure:
[most configure options
what is the max hard drive size squid can use?
I've been using 16 gigs of a 120Gig drive with great success. But i was
wondering if I could get better performance by utilizing the rest of
the drive resources. Would partitioning the drive into multiple pieces
at squids max size limit be the way
Quoting Adam Aube [EMAIL PROTECTED]:
Johnny Doe wrote:
--- Adam Aube [EMAIL PROTECTED] wrote:
Johnny Doe wrote:
--- Adam Aube [EMAIL PROTECTED] wrote:
To clarify: as the user Squid runs as, have you used wbinfo -a to
perform an authentication test, and did you see success
for both
There no other solution than recompile squid ?
There is another solution, but this is probably not very useful as it
involves switching the distribution.
The debian package is precompiled for 4096 FD.
#
# /etc/default/squid
# Configuration settings for the Squid proxy server.
#
# Max. number of
Hello everybody,
I posted this question a while ago and I havent found a solution since.
Maybe somebody can help me with this:
Due to our setup I have a problem using delay pools to equalize bandwith
usage.
All our clients connect to a debian-box running squid 2.4.6, which is
basically running as
rm /lib/modules/2.6.5-1.358/net/ipv4/ip_wccp.ko
depmod -a
and try again.
put manual entry in
/lib/modules/2.6.5-1.358/modules.dep which i have
removed now
still i cant load a ip_wccp successfully i am doing
following this steps
1) put ip_wccp.c /root directory make Makefile with
Jeff Donovan wrote:
what is the max hard drive size squid can use?
I've been using 16 gigs of a 120Gig drive with great success. But i was
wondering if I could get better performance by utilizing the rest of the
drive resources. Would partitioning the drive into multiple pieces at
squids max
what is the max hard drive size squid can use?
Probably any, as squid does not know on what a type of
drive it resides , the only component having to deal with that and
supporting the drive is the underlying OS...
I've been using 16 gigs of a 120Gig drive with great success.
But i
51 matches
Mail list logo
