what about caching in your setup?
this info will surely help you to design your setup.
I am using one proxy server and two caching proxy servers and
the total number of users in my setup are much more than yours.
I would like to ask you one question here as you have done with
transparent proxy.
On Fri, 21 Oct 2005, Shoebottom, Bryan wrote:
Henrik,
One question I'd like a firm answer to, I have heard to install the
ip_wccp module and not to. Which should I be doing?
The purpose of the ip_wccp module is to decapsulate those GRE packets
carrying the redirected packets from the
On Fri, 21 Oct 2005, Matus UHLAR - fantomas wrote:
Redirect users connecting via HTTP to other address using acl and deny_info
(acl will disable HTTP connection, deny_info will send redirection to HTTPS
page) or redirector: http://www.squid-cache.org/Doc/FAQ/FAQ.html#toc15.5
And to detect the
On Fri, 21 Oct 2005, Bonnici Daniel wrote:
I installed Fedora Core 4 and then I installed squid 2.5rc12. The path for the
squid.conf is /usr/local/squid/etc/squid.conf but I noticed that the squid
that came with FC is under /etc/squid/squid.conf. How can I overwrite the squid
that came with
On Thu, 20 Oct 2005, Ben wrote:
ok, so I use ip_wccp with Wccp V1, but the cache don?t see the router
or
router don?t see cache
Is your router supporting WCCP v1?
Yes, My router supportWCCP v1 and support WCCP v2
2005/10/19 09:26:30| Ignoring WCCP_I_SEE_YOU from X.X.X.X with
On Fri, 21 Oct 2005, Gerhardus Geldenhuis wrote:
The strange part is that when I decrease these values again and do a
squid -k reconfigure the download speed shown in firefox does not
decrease at all.
From the Squid-2.5 release notes:
3. Known issues and limitations
Bug #219
On Fri, 21 Oct 2005, Anders Larsson wrote:
Hi!
im trying to block this mime and another below in acl..
DIRECT/62.181.238.210 application/vnd.ms.wms-hdr.asfv1
i got this in squid.conf
## reply
acl streaming_rep rep_mime_type -i ^application/x-mms-framed$
^application/vnd.ms.wms-hdr.asfv1$
On Fri, 21 Oct 2005, John Halfpenny wrote:
My basic authenticator works fine, in the form
/usr/lib/squid/squid_ldap_auth -b ou=Users,dc=my,dc=domain
myname mypassword
OK
Ok.
I have noticed that my LDAP group doesn't have a 'member' attribute, but it
does have 'memberUid'. On my
On Fri, 21 Oct 2005, Senthil Murugan wrote:
Hi,
I have a question on configuring squid with wccp. I have a setup with
squid-2.5s10 on linux 2.4.20. I have ip_gre and ip_wccp kernel modules
installed.
I followed the setup from squid archives. The steps are,
1. installing kernel module
On Fri, 21 Oct 2005, Daniel A. Ramaley wrote:
2005/10/21 10:14:38| /cache/squid: (13) Permission denied
This is a pretty good hint to where your error is..
Regards
Henrik
On Fri, 21 Oct 2005, Tim Neto wrote:
One thought to resolve the single threading of Squid, use a virtual machine
software/system like VMware. The virtual machine software would handle the
processor allocation.
Much easier and more efficient to just run more than one Squid on the same
On Fri, 21 Oct 2005, Fabio Gomes Baptista wrote:
2005/10/21 15:15:00| WARNING: Cannot run '/usr/lib/squid/msnt_auth' process.
This error is usually seen if you have firewalled traffic over the
loopback interface (lo).
Regards
Henrik
On Fri, 21 Oct 2005 [EMAIL PROTECTED] wrote:
After the patch, delay pools became weird. My configuration is
following. Before patch, when reached 100 bytes, downloads
were limited do 8000 bytes/s. After the patch, the control
started to limit this access do 2.7KB/s. Suddenly it rised to
On Fri, 21 Oct 2005, OpenMacNews wrote:
while i dig for up-to-date/relevant v3 docs -- a bit of a challenge, it seems.
at least for me
:-/ -- can someone kindly point to / offer a config example(s) for a simple
site?
It's the same as for 2.5.
Only if you are doing transparent
Hi,
At 15.06 21/10/2005, Gerhardus Geldenhuis wrote:
What I am trying to achieve is to limit our WSUS server downloads
during the day with a delay pool. However everyone else must still be
able to access the
You can do something on Windows side:
WSUS uses BITS for file transfer, so you can
On Sat, October 22, 2005 06:22, Henrik Nordstrom wrote:
After the patch, delay pools became weird. My configuration is
following. Before patch, when reached 100 bytes, downloads
were limited do 8000 bytes/s. After the patch, the control
started to limit this access do 2.7KB/s. Suddenly
Von: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Gesendet: Samstag, 22. Oktober 2005 10:21
On Fri, 21 Oct 2005, Tim Neto wrote:
One thought to resolve the single threading of Squid, use a virtual
machine
software/system like VMware. The virtual machine software would handle
the
processor
I cannot get a reverse proxy to redirect
requests to save my life. I'm simply trying to redirect
http requests from the squid proxy to several web servers
like this:
www.squidproxy.com - www.somehost.com
|
- www.someotherhost.com
Can you please show me an
On 10/22/05, Bernard Barton [EMAIL PROTECTED] wrote:
I cannot get a reverse proxy to redirect
requests to save my life. I'm simply trying to redirect
http requests from the squid proxy to several web servers
like this:
www.squidproxy.com - www.somehost.com
|
I have a squid hierarchy consisting of a pair of load-balanced siblings
and a parent that sits on the security perimeter. All three caches are
configured to use cache digests.
Load balancing is accomplished using a proxy.pac file that defines a
simple hashing algorithm that selects one of the
20 matches
Mail list logo
