Hi
I want to Plot Total current concurrent connections in squid using MRTG.
How can I do this? Which OID do I need to poll?
Thanks - Lokesh
Disclaimer
The information cont
* Jason Bassett <[EMAIL PROTECTED]> wrote:
>
> I am therefore looking for the easiest and most time effective method
> of blocking rooms when required. Hostnames seemed to be the best way.
>
> Any ideas on this issue?
Restricting access an a per user Basis can also be done... just install
an id
> On 5/26/06, Matus UHLAR - fantomas <[EMAIL PROTECTED]> wrote:
> >is that on linux? try checking /proc/interrupts. Maybe reordering PCI cards
> >would help a bit.
> >Do you use 32 or 64bit architecture? iwith 32bit, you probably can't use
> >more than one (or two?) GB of data segment per process,
On Sat, 2006-05-27 at 12:18 -0700, Aaron Chu wrote:
> According to my discussion with some vendors, the C2300 does this:
> 1200 http transactions per sec in forward proxy (I believe the
> effective hit ratio is 55% for this test set)
> 1800 http tps in reverse proxy (90% hit ratio for this test s
Hi
Is there a way I can recieve a daily digest of posts to this mailing list
instead of loads of separate emails, just like the squidGuard mailing list?
Jason
I am running STABLE10 on an old Firewall/Gateway system (Compaq P3 550Mhz)
and just recently have noticed some poor performance now that the cache has
reached its allowable limits.
When bring new files into cache, the system struggles and becomes seriously
IO bound before returning the objects to
mån 2006-05-29 klockan 12:15 +0100 skrev Jason Bassett:
> Is there a way I can recieve a daily digest of posts to this mailing list
> instead of loads of separate emails, just like the squidGuard mailing list?
Yes, by subscribing to the squid-users-digest list instead of
squid-users.
Same list,
mån 2006-05-29 klockan 15:15 +1000 skrev Frank Hamersley:
> When bring new files into cache, the system struggles and becomes seriously
> IO bound before returning the objects to the browser.
Usually this is due to lack of memory.. often caused by incorrect
cache_mem settings or sometimes by havi
Hi all,
My cache dir is set to 5GB, and the mgr:info gives me:
Connection information for squid:
Number of clients accessing cache: 60
Number of HTTP requests received: 12752714
Number of ICP messages received:0
Number of ICP messages sent:
Hi,
HAVP, it is suituable for your request,
Regards,
Zhou Zhen
On 5/26/06, Luciano Pereira Areal <[EMAIL PROTECTED]> wrote:
Luciano Pereira Areal wrote:
> > Hello folks!!
> >
> > I?m intending to setup and configure a "little server" to test and run
> > squid. My question is really simple:
> >
Hi, Jason,
In the maillist homepage:
http://www.squid-cache.org/mailing-lists.html, you could find some
info that I put as below:
squid-users-digest
Posting address [EMAIL PROTECTED]
Administrative address [EMAIL PROTECTED]
Purpose This is a digested versi
yance schrieb:
Hi all,
My cache dir is set to 5GB, and the mgr:info gives me:
... nothing of interest here.
Du -h gives me
/dev/mirror/gm0s1e 10G4.8G4.8G50%/cache
The interesting question is, how did you set the cache replacement water
marks ?
#Default:
# cach
We have a 2.5 squid proxy on a Pentium-II 400 MHz machine serving 50-100
users w/o any problems an doing other things besides proxying. Albeit we
hav added memory to the original configuration (512 MB), that made
things a lot faster.
Yours,
Jakob Curdes
Yeah. I think that's going to be the plan.
There's a few show-stopping bugs in squid3 right now though. I was
hoping to get something working with diskd in the meantime... it seems
like that I/O queue just grows too fast though.
On 5/29/06, Matus UHLAR - fantomas <[EMAIL PROTECTED]> wrote:
Oh!
Hi everyone,
After made a research in squid database, maybe
something is missing and I would like a feedback of
this configuration
I am trying to create an access list with denied
sites and denied extension format, like mp3, exe
But, at the same time I would like to allow a special
list (domain
Hi Chris,
thank you very much for your suggestions.
I tried them but for my proxy solution is very important have got a user
session and not a ip session.
In fact I use a content filtery solution which work with user group policy.
For this reason i tried an external_acl_type with ttl=0 to fo
This looks like your problem
>http_access deny BlockExt
>
>#Allow specialdomain without BlockExt
>http_access deny BlockExt !specialdomain
>
You have a deny all first remove that first one and try it again.
Jason
-Original Message-
From: Sergio Chavarri [mailto:[EM
Thank you Jason for the advice. Its works!
Sergio
--- Jason Staudenmayer <[EMAIL PROTECTED]>
wrote:
> This looks like your problem
> >http_access deny BlockExt
> >
> >#Allow specialdomain without BlockExt
> >http_access deny BlockExt !specialdomain
> >
> You have a deny al
Hi Jakob,
Thank you for the hint.
I am using Squid-2.5 stable13 on FreeBSD 6.0. Release.
Yes I am using the default watermark value.
I am only a bit concerned because these few days the kernel spit out
message like
squid kernel: /cache: optimization changed from SPACE to TIME
or
squid k
On 5/27/06, [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
Does anyone know which is the best (commercial or freeware) caching
engine for Large ISP? Is there any comparison sheet between different
cache engine?
I have heard really good things about BlueCoat and their array of
caching products.
-
Hiyas,
I'm using a pool of (4) squid servers as a web accelerator for a slow backend
(vignette, to be more exact). Right now, almost everything works like a charm,
besides one thing.
I'm using a sibling hierarchy betwen those machines, and the cache mechanism
works like that:
1 - the request
hello,list.
I get a problem when I write a filter rule. I have two urls.
http://host/bbs/1.php and http://host/bbs/foo/bar/x.jpg
now,I want the squid can cache the jpg file but no cache for php
or other script file.
if I use urlpath_regex bbs php or other rule,the
http://host/bbs/foo/bar
Dear All,
I have a question on the access log. How do I change
the date value in the access log so that it can be
readable?
Is there any tool that I can use to generate report on
user access (where, when & what time) and also top 10
popular web visited.
YOur help is highly appreciated.
Quoting nonama <[EMAIL PROTECTED]>:
Dear All,
I have a question on the access log. How do I change
the date value in the access log so that it can be
readable?
imho it's quite readable .. all the field you're looking for is there ..
Is there any tool that I can use to generate report on
use
nonama wrote:
Dear All,
I have a question on the access log. How do I change
the date value in the access log so that it can be
readable?
Is there any tool that I can use to generate report on
user access (where, when & what time) and also top 10
popular web visited.
YOur help is highly appre
25 matches
Mail list logo