On 4/19/07, Erick Dantas Rotole <[EMAIL PROTECTED]> wrote:
When I start squid i get the following error:
ntlm_auth: error opening config file /usr/local/etc/samba/smb.conf.
Error was Illegal byte sequence
I have already set the smb.conf permision to 777 in order to test but
the problem persist.
Hello,
it seems that squid performs some dns request when using some acl such as
dstdomain.
Do you know the reason why squid do this ?
The question can be raised when , for instance the goal is to forward a specific
domain to a parent ( the dns resolution should be useless in this particular
ca
tor 2007-04-19 klockan 14:39 +1000 skrev David:
> Greetings All,
>
> I am experiencing an issue with squid 2.6.STABLE12 running on Solaris
> 10 in a zone where there are alot of TIME_WAIT connections to port
> 8080.
That's quite normal, and should not have much impact on anything.
Any errors in
tor 2007-04-19 klockan 10:42 +0200 skrev Lionel Déruaz:
> Hello,
>
> it seems that squid performs some dns request when using some acl such as
> dstdomain.
>
> Do you know the reason why squid do this ?
dstdomain only performs DNS PTR lookups if the URL requests something by
IP in order to find
ons 2007-04-18 klockan 00:00 +1000 skrev Edward C. Jakosalem:
> I already did and told him that. I actually have a program called _packit_
> up and running. I also found some other useful ones as well. But
> management said Squid can do it and if I can't make it to work, they will
> seek help from
On 18.04.07 09:35, Edjé wrote:
> What're other procols than http which support authentication whith squid?
Are there any protocols that natively support proxies? I can't find any now.
If there are, they should/could support proxy authentication too.
--
Matus UHLAR - fantomas, [EMAIL PROTECTED] ;
Hi,
i will have to setup a squid proxy on rhel4 for a customer within the
next month. The customer needs the access.log messages to be forwarded
to a remote syslog server. I noticed that syslog isn't supported for
access logging in squid 2, but will be supported in squid 3.
Now i have to decide i
On Thu, Apr 19, 2007, Lukic, Daniel wrote:
> Hi,
>
> i will have to setup a squid proxy on rhel4 for a customer within the
> next month. The customer needs the access.log messages to be forwarded
> to a remote syslog server. I noticed that syslog isn't supported for
> access logging in squid 2, bu
The command testparm shows:
# testparm
Load smb config files from /usr/local/etc/samba/smb.conf
Loaded services file OK.
WARNING: passdb expand explicit = yes is deprecated
Server role: ROLE_DOMAIN_MEMBER
Press enter to see a dump of your service definitions
[global]
unix charset = iso-885
On 4/19/07, Erick Dantas Rotole <[EMAIL PROTECTED]> wrote:
The command testparm shows:
# testparm
This seems to be OK.
Can you try running the same command while being logged in as the user
squid runs as?
--
/kinkie
> On Tue, Apr 17, 2007 at 01:58:01PM -0800, Chris Robertson wrote:
> >
> > acl cookieBlockSite dstdomain .certain.site
> > header_access Set-Cookie deny cookieBlockSite
On 18.04.07 00:26, Craig Skinner wrote:
> Brilliant! I set up something like this:
>
> acl cookieBlockSite dstdom_regex msn\.
>
Hello,
I have small farm of caches, all connected internal and external network.
All of squids listen on external interfaces for client connections and on
internal interface for some internal hosts without onnection to external
network (the latter is mostly for backward compatibility).
Since thos
Something must be wrong with my configuration then. Either SharePoint or Squid.
I'm running a stock 2.6 STABLE12, and a fresh install of SharePoint
3.0. SharePoint is set to use Kerberos, but I have also tried NTLM.
I'm also running a very minimal configuration almost identical to
yours. The onl
Hi,
I have a cisco router with a x tcp port nated is possible to nat this
port to the machine which has sqid and then, squid redirect this port to
another machine?
best regards
heze54
Antes de imprimir piensa en tu responsabilidad y compromiso con el MEDIO
AMBIENTE
Mensaje analizado y pr
I did some tests this morning!
I tested with others site which use the same application sequence, and it's
working ...
But I have new log into cache.log
2007/04/19 13:17:05| clientWriteComplete: FD 17, sz 1448, err 0, off 5019, len
-1
2007/04/19 13:17:06| clientReadRequest: FD 18: reading requ
On 4/19/07, heze54 <[EMAIL PROTECTED]> wrote:
Hi,
I have a cisco router with a x tcp port nated is possible to nat this
port to the machine which has sqid and then, squid redirect this port to
another machine?
Is this an accelerator setup?
--
/kinkie
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
I've taken all the changes to the source I made out, and got a stack trace from
the original error (see below). In addition I turned all the related debugging
from squid (not much, but also below).
It appears that the problem occurs when a doma
> mån 2007-04-16 klockan 18:39 -0400 skrev Tuc at T-B-O-H.NET:
>
>> Fot the "helpers/external_acl/session", how does it determine
>> if the user has been seen or not? Cookie? MAC? IP? Other?
>
> Time since last seen.
>
> Where "user" == whatever you send to the helper in the external_acl_type
Scott
I take it to mean that from your description below that you are using
windows integrated authentication to your Sharepoint server via the
transparent proxy.
Are you successfully connecting to your Sharepoint server from outside your
company's network? If so what authentication are you using
Hi Mike,
Yes, windows integrated authentication is called NTLM.
Clients which do not support NTLM (Firefox out of the box, for
instance), will then get a regular dialog box popup for username and
password.
We only have internal users on our Sharepoint server, and thus they are
all a member of th
The default Safe_ports ACL allows a few low (below 1025) ports, and
allows the unprivileged ports above
1024. I'm preparing to roll out a squid cache for use in a
university environment and had planned to use
that ACL pretty much as it was, except...
In testing I was denied access by my squi
21 matches
Mail list logo
