Amos, Henrik,
"http_access allow to_ipv6 !to_ipv6" did work, squid now seems to work as
required and can access both single (IPv4 or IPv6) and dual-stack (IPv4 and
IPv6) destinations.
I´m going to play with the configuration within the next days and post a
summary of my findings, this may be e
Hi, Amos
squid-3.0.STABLE18 is OK. but squid-3.1.0.14 ...
Could you fix that ?
Sincerely,
--
Mikio Kishi
On Sun, Oct 18, 2009 at 3:52 AM, Mikio Kishi wrote:
> Hi, all
>
> I'd like to use "acl aclname myip" on squid-3.1.0.14 like the following.
>
> acl testmyip myip 1.1.1.1/32
>
> But, the fol
I have configured squid-2.6 and Dansguardian 2.10.0.3 on RHEL5 for caching
and web filtering for my office internet users. i m facing problems in
loging into msn messenger, i have put acls in squid and msn ips in
dansguardian exceptionsite list but still not getting msn messenger login,
my squid a
Ross Kovelman wrote:
From: Amos Jeffries
Date: Fri, 30 Oct 2009 14:08:23 +1300
Cc: "squid-users@squid-cache.org"
Subject: Re: [squid-users] WCCP
Ross Kovelman wrote:
From: Amos Jeffries
Date: Tue, 27 Oct 2009 12:17:12 +1300
To: Ross Kovelman
Cc: "squid-users@squid-cache.org"
Subject: Re: [
NOGUES Jean-Marc (EURIWARE) wrote:
Hi,
I have upgraded our squid from 2.5 stable6 to 3.1.0.14 . This because
many remote web servers want Microsoft connection oriented
authentication and I 'have seen that squid 2.5 doesn't forward that
kind of authentication. .
Now using squid 3.1, my
Henrik Nordstrom wrote:
mån 2009-11-02 klockan 16:07 + skrev Adam Binks:
My question is, without using routed static IP's at each site, is it
possible to have squid detect the different end users at each site ?
Only if you figure out some other means of differentiating the users at
the TC
Henrik Nordstrom wrote:
mån 2009-11-02 klockan 23:47 +1300 skrev Amos Jeffries:
Make sure that the mib.txt you/mrtg are using came from the 3.1 source
code. There have been major changes to the MIB numbering in 3.1.
Hmm.. what kind of changes?
MIB numbering should never change. Old numbers m
> Make sure that the mib.txt you/mrtg are using came from the 3.1 source code.
> There have been major changes to the MIB numbering in 3.1.
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE7 or 3.0.STABLE20
> Current Beta Squid 3.1.0.14
>
Hi, thanx for the reply
Yes I am using t
tis 2009-11-03 klockan 11:26 +1300 skrev Amos Jeffries:
> This requirement is met by adding a cache_peer directive for each back-end
> Apache server. Then using cache_peer_access and ACL of the "myip" type
> limiting the requests passed to each peer to be those received on the
> matching input IP.
mån 2009-11-02 klockan 16:07 + skrev Adam Binks:
> My question is, without using routed static IP's at each site, is it
> possible to have squid detect the different end users at each site ?
Only if you figure out some other means of differentiating the users at
the TCP/IP level. I don't.
Re
mån 2009-11-02 klockan 09:23 -0500 skrev Roth, Joe:
> I compiled 3.1.0.14 with the --enable-linux-netfilter option and
> installed.
> Is there any way for me to check that squid is properly enabling the
> kernel option?
The needed kernel option is enabled by iptables, not Squid.
The compile + ht
mån 2009-11-02 klockan 23:47 +1300 skrev Amos Jeffries:
> Make sure that the mib.txt you/mrtg are using came from the 3.1 source
> code. There have been major changes to the MIB numbering in 3.1.
Hmm.. what kind of changes?
MIB numbering should never change. Old numbers may cease to exists when
mån 2009-11-02 klockan 23:42 +1300 skrev Amos Jeffries:
> IME, I think sending the correct realm or domain in the NTLM or
> Negotiate auth headers may prevent clients attempting auth with a known
> mechanism if they are not part of the domain.
If Microsoft had thought about using the required r
On Mon, 2 Nov 2009 15:19:42 +0100, "Riccardo Castellani"
wrote:
> In Debian Lenny I installed Jesred 1.2pl1.16 package and I can see
"regex
> RE
> [RURL [ACCEL]]" doesn't accept ACCEL parameter; I think my package
> (installed via aptitude) is just pre-compiled without "switch
-DUSE_ACCEL".
> File
On Mon, 2 Nov 2009 17:04:25 -0500, "Meyerovich Aleksandr EH_NY"
wrote:
> P.S.
>
> To be more precise it's http://customers.reuters.com/home/default.aspx.
> There's nothing in cache.log or access.log indicative of the problem.
> The page just never finishes loading. I tried excluding aspx from b
You seem to have mixed up your view of the information passed versus the
actions taken and what virtual hosting actually does.
On Mon, 2 Nov 2009 21:22:33 +0100, Justo Alonso
wrote:
> Hi !
> I'm trying to setup an apache & squid in accelerator mode
> configuration.
You start by indicating t
P.S.
To be more precise it's http://customers.reuters.com/home/default.aspx.
There's nothing in cache.log or access.log indicative of the problem.
The page just never finishes loading. I tried excluding aspx from being
cached, but it did not help.
Anybody can help with this?
Thanks,
Alex Meye
Hi !
I'm trying to setup an apache & squid in accelerator mode configuration.
I have the apache in Listen *:80 .. with many virtualhosts and many
namevirtualhosts (namevirtualhost *:80 too). I have the squid at
http_port 8080.
And now I want squid to make the request to the apache to sa
-Original Message-
From: Meyerovich Aleksandr EH_NY
Sent: Monday, November 02, 2009 1:22 PM
To: 'squid-users@squid-cache.org'
Subject: Strange site access problem
Hi,
As I'm trying access a site though Squid 2.6 STABLE 17 and after long
loading I get this:
http://customers.reut
Hi,
As I'm trying access a site though Squid 2.6 STABLE 17 and after long
loading I get this:
http://customers.reuters.com
Thanks a lot,
Alex Meyerovich
---
The information contained in this e-m
Hi All,
Hopefully someone can help !
I am using squid Version 3.0.STABLE20 with squid_session. Squid_session
config in squid.conf is as follows:
external_acl_type session ttl=300 negative_ttl=0 children=1
concurrency=200 %SRC /usr/local/squid/libexec/squid_session -t 360
acl session external ses
I compiled 3.1.0.14 with the --enable-linux-netfilter option and
installed.
Everything starts and it is listening on 3129, however still nothing
arrives.
Is there any way for me to check that squid is properly enabling the
kernel option?
Thanks,
--Joe
-Original Message-
From: Amos Jeff
In Debian Lenny I installed Jesred 1.2pl1.16 package and I can see "regex RE
[RURL [ACCEL]]" doesn't accept ACCEL parameter; I think my package
(installed via aptitude) is just pre-compiled without "switch -DUSE_ACCEL".
File is /etc/jesred.rules and the unaccepted statements are contained in
this d
Babu Chaliyath wrote:
Hi List,
Struggling to get mrtg working with squid. No values shown in the mrtg graph.
My System as follows
OS Freebsd 7.2
Squid 3.1.0.14
Snmpwalk 5.4.2.1
mrtg 2.16.2
Squid snmp acls are working fine as I am getting results with following command
#snmpwalk -m /usr/local/e
Markus Moeller wrote:
Does anybody know how a Windows client determines the right
authentication mechanism ? I have a case where most clients are on a
Windows domain and squid_kerb_auth works fine. Now I have clients from
visitors which have never been on the domain. Can I send to these
clien
Hi List,
Struggling to get mrtg working with squid. No values shown in the mrtg graph.
My System as follows
OS Freebsd 7.2
Squid 3.1.0.14
Snmpwalk 5.4.2.1
mrtg 2.16.2
Squid snmp acls are working fine as I am getting results with following command
#snmpwalk -m /usr/local/etc/squid/mib.txt -v2c -C
Does anybody know how a Windows client determines the right authentication
mechanism ? I have a case where most clients are on a Windows domain and
squid_kerb_auth works fine. Now I have clients from visitors which have
never been on the domain. Can I send to these clients a list of
authentica
27 matches
Mail list logo
