Here saudi telliphone site
with squid in browser
stc.com.sa
bicomes
http://stc.com.sa/cgi-bin/cws/portal/ep/inithome.do
page will not open give error
with error HTTP 404
then if i try it without proxy direct from isp
stc.com.sa
becomes
http://stc.com.sa/cwsPortal/cws.portal
and page open
hi
To be deployed on windows OS.
where can i get the latest binaries version of squid ?
2.6 stable15 or there are later versions of 2.6 ?
or 3.0 ?
Be a better Globetrotter. Get better travel answers
Hello,
I have dialup PPPoE connection on my server.
Squid 2.6 is installed on Windows XP SP2
What i want to do is to let my clients dial a
connection on my server automatically. Meaning, they
just need to request the page, and squid will dial the
connection.
The following is not very important
will the following work correctly with 2.6stable12:
header_access Via deny all
header_access X-Forwarded-For deny all
to completely not sending Via and X-Forwarded-For to
the parent servers.
Looking
Hello all,
We have updated our Squid configuration manual for 2.6 version. It is
available at http://www.visolve.com/squid/squid26/contents.php
We have included examples, wherever possible, to make understanding
easier. We hope our contribution would help potential squid users.
Thanks
Hi!
All gru
Here using squid for cahing media files like films
and clips is imposible
As some other cache stuff is there specially for media
Is it possible to use that in same squid box and
give some ? in squid.conf to go and check media from
there if there is
Did any one have any past
Here again some problem with voice chats
voice chatyahoo work GOOD
voice chat msnmessenger works GOOD
HERE one site www.dall3.com not work with squid
proxy/cache
first page open but if you put the nick and go in last
there are rooms if you click any room you get nothing
And if you use ISP
Using squid 2.6.STABLE14
With 40 clients xp
I dont want to use dns and gateway on my clients
I want every thing done by squid server
like
xp configured
IP-192.168.1.1
gate way 192.168.1.200(squid server
primery dns 192.168.1.200(squid server
secondry dns nill
because the DNS is already
/212.62.97.20 image/gif
1186830981.229610 192.168.1.8 TCP_MISS/304 225 GET
http://www.pakranks.com/rankbox.gif -
ROUNDROBIN_PARENT/212.93.193.87 -
here i have 3 isp on three routers
squid(never_direct)
the proxy is going through right direction on every
router
all dns are in /etc/resolve
checking Default FD_SETSIZE value... 2048
checking Maximum number of filedescriptors we can
open... 1024
I tried defrent ways but unable to change the 1024
from maximum number
please give some help
it must be
checking Maximum number of filedescriptors we can
open... 2048
--- Henrik Nordstrom [EMAIL PROTECTED]
wrote:
On tor, 2007-08-09 at 05:20 -0700, squid learner
wrote:
checking Default FD_SETSIZE value... 2048
ok.
checking Maximum number of filedescriptors we can
open... 1024
this most likely limited by ulimit.
I tried defrent ways but unable
I am using redhat9.0 and squid STABLE14
the default FD 1024
So did increase in FD increase performance of my cache
And what is the way of changing FD and what is best
value to change
please advice
thankyou
Sir
i am using squid for 3 isp in one cache by round-robin
it is working very good
But some times when any of is expire it give isp,s
renew page
http://us.f639.mail.yahoo.com/ym/login?.rand=0rfk33s8soq7o
ok
but after that even the isp is connected and renewd
this page srucks in cache
--- Henrik Nordstrom [EMAIL PROTECTED]
wrote:
And it's probably not Squid, and most likely does
not add the discussed
headers. More likely just standard Windows
connection sharing.
I think that the windows ICS adds the headers because
my ISP was able to block connection from client
--- Tek Bahadur Limbu [EMAIL PROTECTED] wrote:
Hmmm. So did you completely defeat your ISP after
using your stealth
proxy server?
Easily defeated the XFF and Via headers issue with my
proxy server. So my client computers were able to
connect with no blocking.
However, the other
More likely it's just a very large link transmit
buffer at the ISP
causing latency to skyrocket.. seen on most DSL
links. It's a common
technique used for maximising download speeds, but
serverely hurts
interactivity while a download is in progress.
I have a cable internet, and the speed
Thank you for the explanation. For my case, the Squid servers that I have
are acting as forward proxy servers, no peers and no caching on them.
That is to say, the access will be from client -- squid -- various web/app
servers.
This being the case, am I right to say that cacheServerRequests
number
of entries captured on the access.log???
Regards.
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED]
CC: squid-users@squid-cache.org
Subject: Re: [squid-users] Advise on what to monitor using MRTG
Date: Mon, 02 Jul 2007 08:55:01 +0200
On Mon, 2007-07-02 at 09:32
[cachecurrentlruexpiration][_IN_] '
$target-[19]{$mode} ' did not eval into defined data
2007-06-29 13:14:12: ERROR: Target[cachecurrentlruexpiration][_OUT_] '
$target-[19]{$mode} ' did not eval into defined data
Regards.
From: Tek Bahadur Limbu [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED
Hi,
Thank you for the reply.
Kindly advise what would be the matching MRTG graphs plotting that I should
set for the graphs that you have.
Kindly also advise on the SNMP error that I have and how can it be resolved.
Regards.
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL
Yes, these are great stuffs. It will be good if we can also have explanation
of what these graphs are monitoring on squid and how these graphs can help
us to track squid performance.
From: Tek Bahadur Limbu [EMAIL PROTECTED]
To: Henrik Nordstrom [EMAIL PROTECTED]
CC: squid squid [EMAIL
Hi,
I have servers running Squid 2.6 Stable 12 and have managed to install MRTG
2.15.2 on these servers. In view that there are so many graphs seen for
monitoring of squid using MRTG, kindly advise what are the necessary graphs
that I can plot to determine squid performance.
I am also
hi there
I've been looking at squid to provide me with a content filtering proxy
that is publically accessible - all be it with access control. The idea is
that my no-cache proxy - housed in a data center - is used by my household
and friends and family with children whom they would rather
, just sufficient to
avoid wasting too much bandwidth.
Thanks for your response.
I've done a bit of digging around but have found little info on proxy.pac
files. Can i assume, before i do more digging around, that I can put an
exclusion list in a .pac file, and have squid push it transparently
If this is the case, is there any parameters or means that I can find the
total round trip time for the access???
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED]
CC: squid-users@squid-cache.org
Subject: Re: [squid-users] Time to serve request
Date: Wed, 13 Jun 2007
Hi,
I need to understand what %tr (ie. Time to serve request) means. Does the
figure include any time for the response to be sent back to the client, or
is it the time that the proxy server has completed the processing of a
request???
For example, if I have an access from client -- Squid
I would like to setup squid as follows :
Group 1 users (10.1.1.10 and 10.1.1.11) only able to access 2 URLs
(http://intranet.abc.com/abc and http://apps.intranet.abc.com/abc) and 1
domain (interdept.abc.com)
Group 2 users (10.1.1.12 and 10.1.1.13) only able to access 2 URLs
(http
PROTECTED]
To: 'squid squid' [EMAIL PROTECTED], squid-users@squid-cache.org
Subject: RE: [squid-users] ACL advise
Date: Fri, 18 May 2007 14:32:53 +0100
I'm no expert but from what I do know, this is what I would suggest, hope
it
helps.
Your starting 2 ACl's don't make sense, an 8 bit class A subnet
Thank you to all who have provided the advise. Have use the deny all as the
last entry to be on the safe side.
From: Amos Jeffries [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED]
CC: squid-users@squid-cache.org, [EMAIL PROTECTED]
Subject: Re: [squid-users] ACL advise
Date: Sat, 19 May
Hi Henrik,
Thank you for the reply. I have managed to make install successfully by
remarking off line 528 to 534 and line 567 to 575 the following in
store_dir.c. Regards.
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED]
CC: squid-users@squid-cache.org
Subject: Re
Hi,
Both man statfs and statvfs returns No manual entry and I am trying to
compile on Solaris 2.5.1. Kindly advise what are the things to look out for
in config.log to determine the problem. Thank you.
From: Henrik Nordstrom [EMAIL PROTECTED]
To: squid squid [EMAIL PROTECTED]
CC: squid
Hi,
After adding the line, re-compiled and make install, the following error
encountered:
if gcc -DHAVE_CONFIG_H
-DDEFAULT_CONFIG_FILE=\/export/home/squid/etc/squid.conf\ -I. -I.
-I../include -I. -I. -I../include -I../include -Wall -g -O2 -MT
store_dir.o -MD -MP -MF .deps/store_dir.Tpo
for target `store_dir.o'
Current working directory /export/home/squid-2.6.STABLE12/src
*** Error code 1
make: Fatal error: Command failed for target `install-recursive'
Current working directory /export/home/squid-2.6.STABLE12/src
*** Error code 1
make: Fatal error: Command failed for target `install
Hi,
I am using Squid 2.6 Stable 12 to access some of my Intranet applications.
If I access the Intranet application and leave the page idling for about 10
minutes and then try to click on the page again, I received a DNS error
page. Kindly advise what could be the cause of this error. Thank
Hi,
There are various timeout parameters in squid and I would like to know which
are the timeout that will affect a client connection to the squid proxy
server. That is to say, the connection between the client to squid proxy
server and squid proxy server to the apps server will be dropped
Hi,
Based on a connection as follows:
Client PC -- Squid Proxy Server -- Web server
Is my understanding of the following timeout in layman's term correct??? If
not, what should they be???
connect_timeout 120 seconds - This is a timeout between Squid Proxy Server
-- Web Server and if after
variable `sfs'
*** Error code 1
make: Fatal error: Command failed for target `store_dir.o'
Current working directory /export/home/squid-2.6.STABLE12/src
*** Error code 1
make: Fatal error: Command failed for target `install-recursive'
Current working directory /export/home/squid-2.6.STABLE12/src
Hi Henrik,
Thank you for the advise. So I have got read_timeout and request_timeout
mixed up. If I want to ensure that the connection from client PC -- Squid
Proxy Server -- Web Server is always there or dropped after certain time,
pls advise what are the timeout/setting that I should set
Hi,
I am trying to compile and make install squid 2.6 stable 12 on Solaris 2.5
and encounter the following error. Pls advise how can the error be resolved.
Thank you.
Server1# make install
Making install in lib
Making install in snmplib
Making install in scripts
test -z /export/home/squid
Hi!
I wnat to know that still patches for UDMA
and raise of file descriptors 1024 to 8192
is neccessery
in new latest squid
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
I am not very much experienced in squid but working
fine with help of experts from this mailling list
my cache is running
Here i have 50 clients and two dsl 512 lines with
round robin in squid
Problem is when some client open lot of downloads the
speed drops i want to put the exact
please check this URL www.hala5.net
it is in arabic
so i explain you some
this web open easly by squid
after open this go click to TOP right of your screen
-
This is download of chat software
give you this link
http://www.hala5.net
Here i am using squid from long time with no problem
but some of new Voice chats and URLs
Are unable to open with squid
and if i remove squid proxy and change the proxy to
isp proxy it works fine
this URLs
http://www.hala5.net/hala5/chat/iVocalize4Setup.exe
And
iv4://logo=http://www.hala5
Hello List,
I have this setup that I don't think a lot has implemented before. My
Fedora 5 server running the latest Squid stable release has a gigabit
interface connected to a mirrored router port. My question is that how do
I configure squid to capture traffic from my gigabit interface? Doing
I think what you are saying is for Squid to re-read your configuration
file after a change has been made. If this is the case you can simply do:
service squid reload (or restart)
or
/etc/init.d/squid reload (or restart)
On 2/24/07, Henrik Nordstrom [EMAIL PROTECTED] wrote:
lör 2007-02-24
Hi,
Redirection is not enabled by the default by Squid. Although I think it is
easy to enable this, I haven't tried it yet. Have a look at
http://wiki.squid-cache.org/SquidFaq/SquidRedirectors.
If you want redirection to any url from any url, try configuring it on
your http server instead
config before site1 in squid.conf and try to
hit site1, Ill get the page for site2. I also tried using something
like this:
cache_peer_access site1 allow CP_Site1 CP_HTTP
cahce_peer_access site1 deny all
But squid reports a bungled line msg on the deny all line. Any ideas?
-Rob
On 2/14/07
Hey everyone. I have a Squid v2.5 server that Im upgrading to 2.6. Im
running this strictly as an accelerator and have some questions about
the configuration in 2.6. I have some hosts that I am accelerating
http and https traffic on the same host. Do I need to have a
cache_peer line for both
of clients
browsing
i feel that
Thanks again
--- Henrik Nordstrom [EMAIL PROTECTED]
wrote:
mån 2006-11-27 klockan 21:57 -0800 skrev squid
learner:
I am using this squid version 2.5.STABLE14
and problem is dead peer reconnection
so did i add all of this your patches for this
problem
I am using this squid version 2.5.STABLE14
and problem is dead peer reconnection
so did i add all of this your patches for this problem
for auto reconnect of peer
squid-2.2.DEVEL3.icp_dead_detection.patch
squid-2.2.STABLE3.tcp_dead_detection_and_retry.patch
squid-2.2.STABLE2
I am using this squid version 2.5.STABLE14
and problem is dead peer reconnection
so did i add all of this your patches for this problem
for auto reconnect of peer
squid-2.2.DEVEL3.icp_dead_detection.patch
squid-2.2.STABLE3.tcp_dead_detection_and_retry.patch
squid-2.2.STABLE2
I am using this squid version 2.5.STABLE14
and problem is dead peer reconnection
so did i add all of this your patches for this problem
for auto reconnect of peer
squid-2.2.DEVEL3.icp_dead_detection.patch
squid-2.2.STABLE3.tcp_dead_detection_and_retry.patch
squid-2.2.STABLE2
Hello ,
Disk space over limit might be
because the swap.state file has been corrupted. Such corruption can
occur on unexpected system shutdowns (power failure, kernel panic etc).
This can be solve by the following
1. Shutdown squid.
2. Remove the swap.state files from your cache directories.
3
--- Henrik Nordstrom [EMAIL PROTECTED]
wrote:
lör 2006-10-21 klockan 04:37 -0700 skrev squid
learner:
this squid is running from about 6 month this
problem
start from few days
nothing is changed in squid
Further evidence that the problem is most likely not
Squid but something
peppeska wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Are this directive present in squid 2.6??
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
I need it!!
Hello,
The transparent proxy setup in squid.2.6 can be done
, contact your network support team.
==
and it will be with 70% req it happen
AND on refresh i get the page
what it mean that squid except it if i refresh the
same i get that page what is denied
--- So please
__
Do
, contact your network support team.
==
and it will be with 70% req it happen
AND on refresh i get the page
what it mean that squid except it if i refresh the
same i get that page what is denied
--- So please
__
Do
!Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow all
http_access deny all
icp_access allow all
miss_access allow all
==
and with same every thing i get the page on refresh
this squid is running from about 6 month this problem
start from few days
nothing is changed in squid
Access Denied (policy_denied)
Your system policy has denied access to the requested
URL.
For assistance, contact your network support team.
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
Michele de Varda wrote:
Hello,
I have installed squid 2.5 stable 14 with the patch Squid custom log
format. I need to log source client port for distinguishing client
connection behind NAT/PAT networks. In the patch sintax the source
client port is defined with %p but this function seems
Ammad Shah wrote:
I want to how much data is comming from cache and from Internet, i am
using sarg for log analysis, is there any tool that shows me in grph/chart
or in precentage.
I also want to know objects in cache, and its helth.
Hello Shah,
You can see the squid cache hits by using MRTG
--- squid learner [EMAIL PROTECTED] wrote:
some time while using squid i get this following
reply
and and if it happens i have to refresh the page to
get every url give
i dont no what happen and why this problem squid
working from about 3 months very good
why it sudden behave like
configuration can be done by using the following ACL setting in squid.conf
acl IP_List src /usr/local/iplist.txt
acl addresses dstdomain /usr/local/addresslist.txt
http_access allow addresses IP_List
Thanks,
Visolve Squid Team
www.visolve.com/squid/
some time while using squid i get this following reply
and and if it happens i have to refresh the page to
get every url give
i dont no what happen and why this problem squid
working from about 3 months very good
why it sudden behave like this
posting the lines
==
Access Denied
Peter Bengtsson wrote:
# squid -N -d1
FATAL: Bungled squid.conf line 165: external_acl_type
is_cacheable_type children=20 %{Cookie:__ac} %{Cookie:;__ac}
%{Cookie:_ZopeId} %{Cookie:;_ZopeId} %{Authorization} %{If-None-Match}
/etc/squid/squidAcl.py
Squid Cache (Version 2.5.STABLE3): Terminated
?
Hello Siju,
The list of sites can be blocked by using the following configuration in
squid.conf.
acl blocked_sites dstdom_regex /usr/local/sites.txt
http_access deny blocked_sites
Thanks,
Visolve Squid Team
www.visolve.com/squid/
dstdomain 1sk.ru
acl our_nets src 192.168.21.0/24 192.168.22.0/24
http_access allow page
http_access allow auth_users our_nets
Thanks,
Visolve Squid Team
www.visolve.com/squid/
of
filedescriptors
2006/09/19 14:37:28| WARNING! Your cache is running out of
filedescriptors
Hello Dny,
Squid might be compiled with low number of filedescriptors. So need to
increase the filedescriptor value by using ulimit -HSn and
recompile the squid.
Thanks,
Visolve Squid Team.
www.visolve.com
-Original Message-
From: Errol Neal [mailto:[EMAIL PROTECTED]
Sent: Sunday, September 10, 2006 7:00 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Compile-time options
So many.. :)
I'm very new to squid and I'm trying to read up on it as much as
possible before trying
-Original Message-
From: Jaime Solorzano B [mailto:[EMAIL PROTECTED]
Sent: Friday, September 08, 2006 2:51 AM
To: squid-users@squid-cache.org
Subject: [squid-users] squid -k reconfigure error: (1) Operation not
permitted
Hello,
We are using 2.5.STABLE12 version.
As nobody is accessing
-Original Message-
From: Jim John [mailto:[EMAIL PROTECTED]
Sent: Friday, August 25, 2006 9:55 PM
To: squid-users@squid-cache.org
Subject: [squid-users] Squid takes too long to stop.
Hi all. We have squid set up for transparency using shorewall, but it takes
too long to stop. Can we
-Original Message-
From: Robert Shatford [mailto:[EMAIL PROTECTED]
Sent: Friday, September 15, 2006 12:16 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Problem starting squid
Hey guys,
I don't know if I missed something in the setup of my server, but I
cannot get the squid
wangzicai wrote:
Hello everyone!
I am using squid squid-2.5.stable14 in linux ws3 , when the system reboot
the squid can not run automatically.
How can I solve it .
Hello Wangzicai,
Starting squid at bootup can be done by configuring the rc scripts of
your OS environment or configuring
need help my cache is working fine as i wrote before
but this one and + 3 i install for three difrent
places
but fro last three days all stop working
now it works very slow if i give proxy of isp in
client pc it is 10 time faster then my squid
logs are showing
1157190656.416576
127.0.0.0/8
acl Safe_ports port 80 8080 7080 transparent
where 2012.vi is the name of the site, 7080 is the port to which
Zope is listening for requests and 2020 is where squid is listening.
I want all requests for all pages on 2012 to be passed transparently
to port 7080. When I surf
Monty Ree wrote:
Hello, all.
I would like to hide squid version or server information for security
reason. So I set via off at squid.conf file. But via information is
seen as ever.
Is there any directive or method like ServerTokens at apache?
Hello ,
Compile squid by altering
Ralf Hildebrandt wrote:
We're using a
intranet - squid - Dansguardian - squid - Internet
setup to filter the traffic for viruses
This must be the cause for this warning:
Aug 27 23:18:46 proxy-cvk-2 squid[27921]: WARNING: Forwarding loop detected
for: Client: 127.0.0.1 http_port: 127.0.0.1
on
httpd_accel_with_proxy on
all httpd_accel* directives are now gone... any help would be
Hello Wilhelm,
Reverse proxy configuration for squid-2.6 can be done by using the
following configuration in squid.conf.
http_port 80 vhost
cache_peer virtual parent [server listen port] 0 no-query originserver
Dear Chris Robertson Henrik Nordstrom
here i am in truble with cache from two days
it is in three diffrent places same problem
all isp proxy working faster DIRECT in browser
but via squid it is dead slow just white page
i didnt understand because this condition is in three
diffrent
Dave wrote:
Hi
Old versions of squid used:
http_port proxy.gdmckee.home:3128 82.36.186.17:80
When I try the same from squid 2.6 I get an error. How can I correct =
this? Only using squid as a proxy server and a reverse proxy.
Hello Dave,
The reverse proxy for squid-2.6 is little bit
connection
management. The authentication is a three step (5 way) handshake per TCP
connection, not per request.
For more details to configure ntlm visit : http://www.visolve.com/squid/
Thanks,
Visolve Squid Team
http://www.visolve.com/squid/
Rayudu Madhava wrote:
Sir,
Delay Pools in squid 2.6 stable 2 (20060814) seems
not working..
Hello Madhava,
Delay pools now work again in squid-2.6STABLE3.
For more details visit:
http://www.squid-cache.org/Versions/v2/2.6/squid-2.6.STABLE3-RELEASENOTES.html
Thanks,
Visolve Squid Team
S t i n g r a y wrote:
Well thanks to all the help you guys provided i have enabled for the first time OpenBSD + squid+ squidguard on my network, internet seems to work very fast now .
thank you
now i want to know how to block only specific ips specified in a file to download .exe mp3
--- Chris Robertson [EMAIL PROTECTED] wrote:
squid learner wrote:
as
using
4 isp with proxy
with round robin peer
it is working good with weight=1
but now i have to add one isp with out proxy so
how i
configure to that isp
Manish Kathuria wrote:
Squid proxy server has been configured with Basic Authentication and
is running perfectly. Is it possible to allow some users to bypass
Authentication on the basis of their IP Addresses and/or Mac addresses
under this or some other Authentication Scheme ?
Hello
as
using
4 isp with proxy
with round robin peer
it is working good with weight=1
but now i have to add one isp with out proxy so how i
configure to that isp --- - --
with
never_direct
__
Do You Yahoo!?
Tired of spam?
Stuart J. Newman wrote:
I am running squid 2.5.STABLE3 from Redhat in Redhat Enterprise Linux 3. I
have followed the instructions to increase the number of filedescriptors to
2048 using the instructions in the FAQ. I have checked include/autoconf.h and
verified that the 2048 number
Jamshid KP wrote:
HI,
In my company we are using Fedora Core 2 as Operating System and
Squid-2.5and Proxy server. I wish to delay the bandwidth of
somewebsites through Squid. Please help me to find out where will I
put the URL of websites in Squid.conf delay the bandwidth
One more matter also
--- Chris Robertson [EMAIL PROTECTED] wrote:
squid learner wrote:
squid in start run very good but after 6-7 hours
it
stop responding it losses connection
even i am unable to use webmin through any
connected
pc until i manually restart the squid box
but the ping is OK it shows
Service Providers (ISP) prevent access to the on-line
application because of the port or IP address.
For more details about access list and ACL elements visit :
http://wiki.squid-cache.org/SquidFaq/SquidAcl
Thanks,
Visolve Squid Team
http://www.visolve.com/squid/
kashif Mazhar wrote:
plz tel me what does this line means and why this is happening to my
squid, As squid started unefficient after 1 day and within 4 to 5 days
it goes DIE.
along with many error lines i found this in it.
plz let me know about it.
2006/08/08 18:06:00| idnsCheckQueue: ID 329f
squid in start run very good but after 6-7 hours it
stop responding it losses connection
even i am unable to use webmin through any connected
pc until i manually restart the squid box
but the ping is OK it shows that squid box is connected
__
Do
Oscar Rylin wrote:
Recently, one of our accelerated machines started throwing out errors, and
it got me thinking.
Would it be possible to have Squid not cache objects based on a status code
(for instance 500/Internal server error, 403 forbidden etc)?
This would be something along the lines
--- squid learner [EMAIL PROTECTED] wrote:
Date: Fri, 4 Aug 2006 22:52:42 -0700 (PDT)
From: squid learner [EMAIL PROTECTED]
To: squid-users@squid-cache.org
Subject: [squid-users] please help __- squid didnt
connect if failed
Parent : 212.xx.x.x/8080/0
Flags : no-query
Parent : 212.xx.x.x/8080/0
Flags : no-query no-digest round-robin
no-netdb-exchange no-delay
Address[0] : 212.xx.x.x
Status : Up
AVG RTT: 0 msec
OPEN CONNS : 11
LAST QUERY : 1154719036 seconds ago
LAST REPLY : 1154719036 seconds ago
PINGS SENT :0
PINGS ACKED:0 0%
vinayan K P wrote:
Hello,
Hope someone could help me.
I am using a squid proxy (squid-2.5.STABLE13-1.FC4) behind another
squid proxy and firewall.
Hello Vinayan,
If you are behind a firewall then you can't make direct connections to
the outside world, so you *must* use a parent cache
Hello,
Unfortunatly i have to call for aid. Ive read every mail discussion thread
available on google.com about using squid with LDAP authentication.
I did have configured my ldap_auth module correctly and it gives me the
following responses when run from command line .
/usr/local/squid
I believe i didn't explain me quite correctly, i do have 2 linux boxes
running squid. The one that runs 2.4 is very old, runs NCSA authentication
and works fine. I used it only to show what kind of DNS error i expected, if
it was really a problem of dns. I expected a proxy error page, the one
Andrew Yoward wrote:
Hi Folks,
how to turn off caching of HTML?
Hello Andrew,
It can be done by using following ACL
acl html rep_mime_type -i text/html
cache deny html
--
Thanks,
Visolve Squid Team,
http://squid.visolve.com
what is good to be to configure with :-
--disable-internal-dns
or
--enable-internal-dns
for the setup of three round robin peers ==with :-
never-direct
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
201 - 300 of 569 matches
Mail list logo
