On Wednesday 12 July 2023 at 18:11:08, Andrés Leandro Regalado wrote:
> I implemented squid proxy in a small office to filter the internet and now it
> blocks the communication of the mail client with the mail server, I need to
> know how I can allow outlook or thunderbird to work through squid.
hello Dear community,
I need help, because I implemented squid proxy in a small office to
filter the internet and now it blocks the communication of the mail
client with the mail server, I need to know how I can allow outlook or
thunderbird to work through squid.
thank you.
--
Ing.
Hello we are trying to configure two squid reverse proxy, one frontend
to internet and the other inside the network.
Both on reverse proxy mode, and one dependening the other.
internet ---> squid reverse proxy one ---> squid reverse proxy two
---> inside web server
Accessing to first
On 13/08/18 12:30, John Renzi Manzo wrote:
> Good day team squid,
> Please help me,
> I am using squid 3.0 in our windows server 2012 r2, i
> already configure it.
First thing is please try an upgrade. Squid-3.0 was deprecated in 2010.
For more current packages
Good day team squid,
Please help me,
I am using squid 3.0 in our windows server 2012 r2, i
already configure it.
Ban sites and allow specific ip addresses to browse all
sites, but the problem is is i cannot open our website. Please see attached
On 20/06/2015 9:45 a.m., davincy wrote:
Im trying to enable the certificates. I have the certs .pen but I dont know
how get the .key
https_port 3129 intercept ssl-bump
cert=/etc/squid/ssl_cert/sslsplit_ca_cert.pem
cafile=/etc/squid/certs/sslsplit_ca_cert.pem
Im trying to enable the certificates. I have the certs .pen but I dont know
how get the .key
https_port 3129 intercept ssl-bump
cert=/etc/squid/ssl_cert/sslsplit_ca_cert.pem
cafile=/etc/squid/certs/sslsplit_ca_cert.pem
key=/opt/etc/squid/certs/sslsplit_ca_key.pem generate-host-certificates=on
On 6/06/2015 2:51 a.m., davincy wrote:
Hi Everybody
Im young and curious with the new theme, filter https with squid
Check your local laws before going any further. HTTPS interception and
decryption is illegal in most countries, and even where it is legal may
still require a government
On 4/03/2015 2:30 a.m., laxcat wrote:
I have squid installed on a NAT instance in AWS. I installed squid using
yum. The OS is amazon linux. When squid is not running I am able to send
traffic through the nat box from private subnets but when I start squid I am
not.
Please follow this
I have squid installed on a NAT instance in AWS. I installed squid using
yum. The OS is amazon linux. When squid is not running I am able to send
traffic through the nat box from private subnets but when I start squid I am
not.
This is the default iptables rules:
[admin@box1 ~]# iptables -t
Thanks for the quick reply Yuri,
I made a few changes to make sure that I was doing the right thing with
respect what port I'm using, and this is my current configuration. Both my
certificate as well as my key are in the same file, which from my
understanding should work, however I'm sure I'm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matt,
you need self-signed root CA certificate with private key to HTTPS
interception work with ssl-bump.
Config lines must looks like this:
http_port 3127
http_port 3128 intercept
https_port 3129 intercept ssl-bump generate-host-certificates=on
Dear Amos,
Could you help me one more time with this error, I installed Squid 3.4.9
already
But when I run it, it appears with this error
2014/12/13 16:12:32| assertion failed: mem.cc:282: size ==
StrPoolsAttrs[i].obj_size
ubuntu@ubuntu:/$ squid
Aborted (core dumped)
I attached the log file
Thanks Amos,
Do you have any recommendation for the CPU for squid?
2014-12-08 14:57 GMT+07:00 Amos Jeffries squ...@treenet.co.nz:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 8/12/2014 7:19 p.m., Hoang Nguyen wrote:
Hi,
I attached the capture of the error that I gets
Anyone
Dear Squid Support
I'm newbie about Squid, could you help me to point out the error I get
while I installing the Squid
OS: Ubuntu LTS 12.04
I follow the guide on this link: http://www.e-cap.org/Documentation
$ tar -xzf squid-3.4.9.tar.gz
$ cd squid-3.4.9/
$ ./configure --enable-ecap make
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 8/12/2014 7:19 p.m., Hoang Nguyen wrote:
Hi,
I attached the capture of the error that I gets
Anyone can help?
That looks like an error inside your compiler tools. Probably the
compielr is not the correct build for your CPU architecture.
On 2014-07-01 21:23, Roberto PATRICOLO wrote:
Hi all
I'm new in this environments, so I've a problem related to an
application in an environment that uses a NTLM authentication. This
kind of
authentication is not supported by the sw I'm using so the support
said me that the best way to solve
Hi all
I'm new in this environments, so I've a problem related to an application in an
environment that uses a NTLM authentication. This kind of
authentication is not supported by the sw I'm using so the support said me that
the best way to solve the issue is installing a squid proxy server
in
Hi all,
Could you please give me some tip / point me in the direction of how
i can achieve the following?
I need squid to redirect certain download types to a download manager
like aria2 or axel - which will download the file using segmented
downloading and pass the file to squid or to the user
On 2014-03-30 23:10, Fahim Mohammed wrote:
Hi all,
Could you please give me some tip / point me in the direction of how
i can achieve the following?
I need squid to redirect certain download types to a download manager
like aria2 or axel - which will download the file using segmented
Hi Amos, thank you very much for your detailed reply. Appreciate the
time you've taken.
:)
i was thinking of a script where squid pipes downloads of type .iso , .exe,
.img to a download manager like Axel or Aria2 (segmented downloading). The
download manager will act independently.
User request
Hi All
I will make use of your suggestions, but this is not just netflix
related, basically whatever site I visit I get this error about
LookupHostIP: Given
Non-IP 'signup.netflix.com': Name or service not known
Of course with the variation of the hostname at hand.
Regards
On Tue, Dec 18, 2012
Hi
I am trying to setup an HTTPS transparent proxy with latest stable
squid with --enable-ssl compiled. Problem is that the squid server
returns an error connection refused, but the thing is that it was
trying to connect to itself. I did also check using tcpdump and
actually no https requests are
Netflix doesn't work through Squid
The only option you have to allow Netflix to work through a proxied
environment without adding exceptions on all your clients, is to put
this code in your configuration file:
acl netflix dstdomain .netflix.com
cache deny netflix
That allows Netflix to fully
On 12/18/2012 2:31 AM, Joshua B. wrote:
Netflix doesn't work through Squid
The only option you have to allow Netflix to work through a proxied
environment without adding exceptions on all your clients, is to put
this code in your configuration file:
acl netflix dstdomain .netflix.com
cache
On 18/12/2012 1:31 p.m., Joshua B. wrote:
Netflix doesn't work through Squid
The only option you have to allow Netflix to work through a proxied
environment without adding exceptions on all your clients, is to put
this code in your configuration file:
acl netflix dstdomain .netflix.com
cache
hi,
my name is Camilo and i'm just finish my quid configuration and iptables.
the thing is, i have an ubuntu server 10.4 with squid in it and a router 3G.
So, first i build my wifi network, after that i setup an ip static address for
my server, and at the end i install squid. When i use an
On 26/05/11 20:48, Camilo Cadena wrote:
hi, my name is Camilo and i'm just finish my quid configuration and
iptables.
the thing is, i have an ubuntu server 10.4 with squid in it and a
router 3G. So, first i build my wifi network, after that i setup an
ip static address for my server, and at the
On 26/05/11 23:41, Camilo Cadena wrote:
hi,
the iptables configuration i'm using:
snip
iptables-t nat-P PREROUTING ACCEPT
iptables-t nat-P POSTROUTING ACCEPT
iptables-t nat-A POSTROUTING-s 192.168.1.0/24 -o eth0-j MASQUERADE
snip
You have nothing involving NAT interception
thanks for the reply. Ok so now I've modified the script with your
suggestion and I get this in my access.log
http://dnl-16.geo.kaspersky.com/ftp://dnl-kaspersky.quimefa.cu:2122/Updates/.com/index/u0607g.xml.klz
I'm pretty sure this is not working for the clients. I'm looking for it
to return
Osmany,
I can help you but I think it is better to do this off list.
You can send me to my private email
- the latest version of the script and
- the unedited relevant lines from access.log
Marcus
Osmany wrote:
thanks for the reply. Ok so now I've modified the script with your
suggestion and
So finally this is what I have and it works perfectly. But I want to go
further than this. I want the clients to download what they've requested
from my local urls. For example...if a client wants to update their
Kaspersky antivirus and it requests for an internet update server, I
want it to
Osmany,
look in access.log.
It should say what is happening:
I expect this:
... TCP_MISS/301 GET http://kaspersky
... TCP_MISS/200 GET ftp://dnl-kaspersky.quimefa.cu:2122/Updates
and does the client use Squid for the ftp protocol ??
And the RE matches too many strings.
I recommend to
On Tue, 2011-03-08 at 12:21 +1300, Amos Jeffries wrote:
On Tue, 08 Mar 2011 11:58:57 +1300, Amos Jeffries wrote:
On Mon, 07 Mar 2011 16:59:07 -0500, Osmany wrote:
Greetings everyone,
So I'm having trouble with my squid proxy-cache server. I recently
added
a redirect program because I
Forwarded Message
From: Osmany osm...@oc.quimefa.cu
Reply-to: osm...@oc.quimefa.cu
To: squid-users squid-users@squid-cache.org
Subject: Re: [squid-users] help with squid redirectors
Date: Tue, 08 Mar 2011 07:20:11 -0500
On Tue, 2011-03-08 at 12:21 +1300, Amos Jeffries wrote
On 09/03/11 01:20, Osmany wrote:
On Tue, 2011-03-08 at 12:21 +1300, Amos Jeffries wrote:
On Tue, 08 Mar 2011 11:58:57 +1300, Amos Jeffries wrote:
On Mon, 07 Mar 2011 16:59:07 -0500, Osmany wrote:
Greetings everyone,
So I'm having trouble with my squid proxy-cache server. I recently
added
a
On Wed, 2011-03-09 at 01:33 +1300, Amos Jeffries wrote:
On 09/03/11 01:20, Osmany wrote:
On Tue, 2011-03-08 at 12:21 +1300, Amos Jeffries wrote:
On Tue, 08 Mar 2011 11:58:57 +1300, Amos Jeffries wrote:
On Mon, 07 Mar 2011 16:59:07 -0500, Osmany wrote:
Greetings everyone,
So I'm having
Forwarded Message
From: Osmany osm...@oc.quimefa.cu
Reply-to: osm...@oc.quimefa.cu
To: squid-users squid-users@squid-cache.org
Subject: Re: [squid-users] help with squid redirectors
Date: Tue, 08 Mar 2011 07:41:47 -0500
On Wed, 2011-03-09 at 01:33 +1300, Amos Jeffries wrote
On Tue, 08 Mar 2011 07:52:50 -0500, Osmany wrote:
Forwarded Message
From: Osmany osm...@oc.quimefa.cu
Reply-to: osm...@oc.quimefa.cu
To: squid-users squid-users@squid-cache.org
Subject: Re: [squid-users] help with squid redirectors
Date: Tue, 08 Mar 2011 07:41:47 -0500
On Wed
Greetings everyone,
So I'm having trouble with my squid proxy-cache server. I recently added
a redirect program because I had to make users go to my kaspersky admin
kit and my WSUS services to get their updates and it works fine but I
get constantly a warning and squid just collapses after a few
On Mon, 07 Mar 2011 16:59:07 -0500, Osmany wrote:
Greetings everyone,
So I'm having trouble with my squid proxy-cache server. I recently
added
a redirect program because I had to make users go to my kaspersky
admin
kit and my WSUS services to get their updates and it works fine but I
get
On Tue, 08 Mar 2011 11:58:57 +1300, Amos Jeffries wrote:
On Mon, 07 Mar 2011 16:59:07 -0500, Osmany wrote:
Greetings everyone,
So I'm having trouble with my squid proxy-cache server. I recently
added
a redirect program because I had to make users go to my kaspersky
admin
kit and my WSUS
Jorge Perez wrote:
Hello, we are implementing a squid proxy server in my office.
The principal idea is to limit bandwith using delay pools and also block some
websites.
We have made our config and its working, but we dont know if everyting is
correct specially in the delay pools part.
Hello, we are implementing a squid proxy server in my office.
The principal idea is to limit bandwith using delay pools and also block some
websites.
We have made our config and its working, but we dont know if everyting is
correct specially in the delay pools part.
**Introduction:
We have
did you read
http://wiki.squid-cache.org/Features/DelayPools
??
Le mardi 15 juin 2010 14:42:13, Jorge Perez a écrit :
Hello, we are implementing a squid proxy server in my office.
The principal idea is to limit bandwith using delay pools and also block
some websites.
We have made our
Hello All
I've setup a Squid proxy server according to the following guidelines
http://serverfault.com/questions/66556/getting-squid-to-authenticate-with-kerberos-and-windows-2008-2003-7-xp
as my previous proxy version (on a completely different hardware platform)
used NTLM authentication
Hi,
Could someone perhaps give me a clue as to the reason for the following
417 Expectation Failed error I'm getting back from squid. This is an
online video system with a flash player and it would appear to be flash
making a direct HTTP connection through the proxy.
Request packet fragment and
Gavin McCullagh wrote:
Hi,
Could someone perhaps give me a clue as to the reason for the following
417 Expectation Failed error I'm getting back from squid. This is an
online video system with a flash player and it would appear to be flash
making a direct HTTP connection through the proxy.
Hi Amos,
On Tue, 13 Apr 2010, Amos Jeffries wrote:
Squid is following RFC 2616 requirements. When HTTP/1.1 request
containing Expect: 100-continue is going to pass through a
HTTP/1.0 proxy or server which can't handle the 100 status
messages a 417 message MUST be sent back instead.
The
[...]
I want to implement linux squid proxy server so that i have better
controls that is ( time based restrictions , ip based restrictions and
block certain web sites ) through squid ACLS
I think i have to implement squid as a transparent proxy server with 2
lan cards on the squid server
Benedict simon wrote:
Dear All,
I have used Squid before but im little confused on as how to implement
squid on the following setup
current setup as follows
DSL router with a public Ip for the WAN ( connection to the ISP)
lan ip address on dsl router is 192.168.1.254
local network
Thanks guys,
I really apprecite your quick reply
i will try out your advices and check it out
and Mr Kaya u dont have to apologize at all . I should be indeed so
grateful to you that u spent your precious valuble time to read my mail n
to reply to it.
Thanks once again guys
regards
simon
Dear All,
I have used Squid before but im little confused on as how to implement
squid on the following setup
current setup as follows
DSL router with a public Ip for the WAN ( connection to the ISP)
lan ip address on dsl router is 192.168.1.254
local network 192.168.100.0/24
right now the
Hello:
I have a problem with a cache squid, squid not generate files on the cache
dir.
* I have a squid as a reverse proxy.
* My version of squid is 3.0.RC1.
* On the cache dir structure I have a lot of directories, but all are empty.
* The cache dir have 777 permissions on all structure
* The
Juan Manuel Perrote wrote:
Hello:
I have a problem with a cache squid, squid not generate files on the cache
dir.
* I have a squid as a reverse proxy.
* My version of squid is 3.0.RC1.
Yikes. 3.0.RC1 is at least better than the PRE versions, but it's still
not a Stable release. It's
On Tue, 16 Jun 2009 09:23:36 -0300, Juan Manuel Perrote
jperr...@educacion.rionegro.gov.ar wrote:
Hello:
I have a problem with a cache squid, squid not generate files on the
cache
dir.
* I have a squid as a reverse proxy.
* My version of squid is 3.0.RC1.
* On the cache dir structure I
Hi All,
iam trying to install squid 2.6 on my SPARC system with solaris 10 OS
when i run ./configure it creates the necessary files
but when i try executing
# make
i get the following error
/usr/ccs/bin//ar cru libbasic.a basic/auth_basic.o
ranlib libbasic.a
make[3]: Leaving directory
Hi List,
I hope I could get some help here related to configuring Squid-2.6
with Tproxy-4.0.1 support.
My setup is like this:
20.20.20.2 20.20.20.1 192.168.1.12 192.168.1.15
WebUser -- SquidProxy+Tproxy WWWServer
I want to
Hi List,
I hope I could get some help here related to configuring Squid-2.6
with Tproxy-4.0.1 support.
My setup is like this:
20.20.20.2 20.20.20.1 192.168.1.12 192.168.1.15
WebUser -- SquidProxy+Tproxy WWWServer
I want to
elo guys, i just want to ask what do i need to do. i have installed squid on
windows server 2003, and im trying to have an NCSA authentication. but
everytime a client access the web, squid is temninated abnormally.
this is the error on cache logs
2007/07/04 03:47:55| Starting Squid Cache
alen21 escribió:
elo guys, i just want to ask what do i need to do. i have installed squid on
windows server 2003, and im trying to have an NCSA authentication. but
everytime a client access the web, squid is temninated abnormally.
this is the error on cache logs
2007/07/04 03:47:55|
Guess what?.. It just suddenly went OK today. Without me doing anything ;-)
I guess it fixed itself, hehe..
Thanks Jacob for the replies.
On 2/25/07, Jakob Curdes [EMAIL PROTECTED] wrote:
Noel Manansala schrieb:
the log file has an entry that says cache is running out of file
descriptors
Thanks too, Genco!..
On 2/27/07, Noel Manansala [EMAIL PROTECTED] wrote:
Guess what?.. It just suddenly went OK today. Without me doing anything ;-)
I guess it fixed itself, hehe..
Thanks Jacob for the replies.
On 2/25/07, Jakob Curdes [EMAIL PROTECTED] wrote:
Noel Manansala schrieb:
Help guys!
My squid (Squid 3) on a Fedora Core 5 just suddenly stopped working.
It has been working for almost a year without any problems but this
afternoon it just suddenly stopped working. Though the service is
working fine. I can start and stop the Squid service fine from Webmin.
I can go
Noel Manansala schrieb:
Help guys!
Well, perhaps at first you should look into your config file and find
out where your logs are.
Then make sure you have access and main logging actviated and look into
these after you restart the service.
Chances are your cache ist full or your log partition
the log file has an entry that says cache is running out of file descriptors
is this the reason why?
On 2/25/07, Jakob Curdes [EMAIL PROTECTED] wrote:
Noel Manansala schrieb:
Help guys!
Well, perhaps at first you should look into your config file and find
out where your logs are.
Then make
Noel Manansala schrieb:
the log file has an entry that says cache is running out of file
descriptors
That will be your problem. Looks like you have a very large cache ?
Please _post_ the logfile entries that come in after a start attempt !
JC
I read a lot article to start squid automatic when the pc start or restart
the same with apache.Sameone can help me ?? I am using debian sarge 3.1 and
i would like to do when the pc restart squid clean the cache it is posible
because i do not find and it is possible programm x date clean the
mån 2006-08-14 klockan 09:37 -0300 skrev Alejandro Decchi:
auth_param basic program /usr/local/squid/libexec/squid_ldap_auth -P -R -b
dc=sadepan -D cn=squid,cn=Users,dc=sadepan -w zpig#s1 -f
((objectClass=user)(cn=%s)) -h 192.168.0.2 -p 3268
Looks sort of reasonable. Does it work if you
]
To: Alejandro Decchi [EMAIL PROTECTED]
Cc: squid-users@squid-cache.org
Sent: Saturday, August 12, 2006 3:47 PM
Subject: Re: [squid-users] Help Error squid !!!
PROTECTED]
To: Henrik Nordstrom [EMAIL PROTECTED];
squid-users@squid-cache.org
Sent: Monday, August 14, 2006 9:37 AM
Subject: Re: [squid-users] Help Error squid !!!
I installed and configures squid_ldap_auth ,but when I try to navegate throw
squid, i can not.I supouse that the problem
fre 2006-08-11 klockan 10:36 -0300 skrev Alejandro Decchi:
Hello !
When i try to do :
./configure --enable-auth=LDAP --enable-basic-auth-helpers=LDAP
--enable-LDAP-auth-helpers=LDAP
case is important, and so is using the correct names on things..
./configure --enable-auth=basic
-cache.org
Sent: Saturday, August 12, 2006 6:03 AM
Subject: Re: [squid-users] Help Error squid !!!
lör 2006-08-12 klockan 10:05 -0300 skrev Alejandro Decchi:
Hello my squid friend ! Someone known if i have to configure the salpd.conf
with the information of my windows 2003 active directory domain controller.
What? slapd.conf is the OpenLDAP server configuration. Fail to see how
this is
Hello !
When i try to do :
./configure --enable-auth=LDAP --enable-basic-auth-helpers=LDAP
--enable-LDAP-auth-helpers=LDAP
it is O.K but when i made :
make i had this error:
make[3]: *** no rule to make target 'libldap.a', need by 'all-am'.stop.
make[3]: Leaving directory
tor 2006-06-01 klockan 09:33 +0530 skrev Remy Almeida:
Hi
In squid.conf file the entry is
auth_param basic program /usr/lib64/squid/squid_ldap_auth -b
o=cd,dc=connectserver -u cn -D cn=Manager,dc=connectserver -w
[EMAIL PROTECTED] -f cn=%s -v 3 -h 192.168.1.201
Which Squid
Hi All
I'm using squid-ldap for authentication everything is working fine
but if the password is containing # character it does not accept. Need some
help
I'm using Squid Cache: Version 2.5.STABLE13
With the following options,
configure options: --host=x86_64-redhat-linux-gnu
ons 2006-05-31 klockan 12:12 +0530 skrev Remy Almeida:
Hi All
I'm using squid-ldap for authentication everything is working fine
but if the password is containing # character it does not accept. Need some
help
Which LDAP authentication helper are you using?
squid_ldap_auth from the
:[EMAIL PROTECTED]
Sent: Thursday, June 01, 2006 6:36 AM
To: Remy Almeida
Cc: Squd-help
Subject: Re: [squid-users] help on squid-ldap
ons 2006-05-31 klockan 12:12 +0530 skrev Remy Almeida:
Hi All
I'm using squid-ldap for authentication everything is working fine
but if the password
mån 2006-02-13 klockan 14:55 -0200 skrev Carlos Eduardo Gomes Marins:
I don't have Squidguard nor Dansguardian, only Trendmicro IWSS as mentioned,
so all the acls's and handled by Squid itself.
Is there anything I can do to improve the overall performance?
What kinds of ACLs are you using?
-Original Message-
From: Carlos Eduardo Gomes Marins
[mailto:[EMAIL PROTECTED]
Sent: Monday, February 13, 2006 7:55 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Help tuning squid
Hi,
I believe I have some performance issues here using Squid.
The swap area
On Wed, 1 Jun 2005, Phibee Network operation Center wrote:
1- I don't know why, but all web site with a refresh have a access
denied .. my user going on the web site no problems, wait 5mn the web
site refresh and when he refresh i have a access denied
Don't know.
2- I don't know why with IE
Hi
i request your help for resolve four problems that i have with Squid/Samba.
I use squid-2.5.STABLE9 and samba 3.0.14a with a authentification ntlm
winbindd
my fours problems :
1- I don't know why, but all web site with a refresh have a access denied ..
my user going on the web site no
On 6/1/05, Phibee Network operation Center [EMAIL PROTECTED] wrote:
Hi
i request your help for resolve four problems that i have with Squid/Samba.
I use squid-2.5.STABLE9 and samba 3.0.14a with a authentification ntlm
winbindd
my fours problems :
1- I don't know why, but all web site
It seems that you have not create GRE tunnel successfully. You can try this:
# ifconfig gre0 create
# ifconfig gre0 link0 tunnel squid_host_IP router_IP up
where:
router_IP is IP address of routers physical interface (not loopback interface)
Besides, I noticed that with IOS 12.x, if you
Hi Bin
Thanks a lot It worked :-). All I had to do
was
no ip route-cache cef
in the cisco router interface.
Regards,
Lakmal
--- Bin Liu [EMAIL PROTECTED] wrote:
It seems that you have not create GRE tunnel
successfully. You can try this:
# ifconfig gre0 create
#
I think you need to tell FreeBSD that you want WCCPv2 by specifying
`link2' when creating the gre tunnel.
On Apr 6, 2005 8:45 PM, Bin Liu [EMAIL PROTECTED] wrote:
I've already got my FreeBSD 5.3 box running with squid 2.5 and WCCPv1
successfully, but when I switched to WCCPv2, it failed. It
), then WCCP version 1 is
selected.
- Original Message -
From: Francis Vidal [EMAIL PROTECTED]
To: Bin Liu [EMAIL PROTECTED]
Sent: Thursday, April 07, 2005 8:41 AM
Subject: Re: [squid-users] Help with Squid 2.5 on FreeBSD 5.3 and WCCP
I think you need to specify link2 when you create
Hi all,
I've been configuring Squid 2.5-STABLE9 to work with WCCP on FreeBSD
5.3-STABLE the whole day, following all the samples in
http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.13, and yet I
couldn't make it work. Has anyone successfully made Squid 2.5 on
FreeBSD 5.x with WCCP?
On Fri, 1 Apr 2005, Francis Vidal wrote:
I've been configuring Squid 2.5-STABLE9 to work with WCCP on FreeBSD
5.3-STABLE the whole day, following all the samples in
http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.13, and yet I
couldn't make it work. Has anyone successfully made Squid 2.5 on
On Sat, 26 Feb 2005, Pankaj Agarwal wrote:
I am facing a very strange problem with squid. Users in my LAN are not able
to connect to some of the HTTPS sites. On that particular sites it keeps on
asking for username and password but if I configure the client to direct
access ..then I gives the
On Thu, 3 Mar 2005, Sangeeta Chachlani wrote:
I need to understand the source code of squid as to where is it
actually picking the webpages if they are cached when they are
requested. Is there any documentation that I can refer to understand
what the various C files are doing in the source code
HI...
I need to understand the source code of squid as to where is it
actually picking the webpages if they are cached when they are
requested. Is there any documentation that I can refer to understand
what the various C files are doing in the source code of squid.
Or if anyone of you has played
Hi,
I am facing a very strange problem with squid. Users in my LAN are not able
to connect to some of the HTTPS sites. On that particular sites it keeps on
asking for username and password but if I configure the client to direct
access ..then I gives the webpage and asks for user name and
Hi ,
i am trying to use the squid proxy / cache server in my setup .
I want to know whether the squid server can cache windows media files
(wmv,asf) so that when a client makes a http request for a media file , it is
served from the cache instead of the origin server .
i tried looking for the
i am trying to use the squid proxy / cache server in my setup .
I want to know whether the squid server can cache windows media files
(wmv,asf) so that when a client makes a http request for a media file , it is
served from the cache instead of the origin server .
Do you want to cache
Hi ,
i am trying to use the squid proxy / cache server in my setup .
I want to know whether the squid server can cache windows media files
(wmv,asf) so that when a client makes a http request for a
media file , it is
served from the cache instead of the origin server .
i tried looking
Hi ,
You can check out the linux policy based routing.
the url is this
http://www.lartc.org/lartc.html
--- info [EMAIL PROTECTED] wrote:
Dear Sir/madam,
i have 2 internet connection.1-via lised line (2way)
2- recive only by
satellite with some valid IP.
now my users ues of lieasd line and
Dear Sir/madam,
i have 2 internet connection.1-via lised line (2way) 2- recive only by
satellite with some valid IP.
now my users ues of lieasd line and i have squid cache and work correctly.
now i want my users get thire HTTP requests only from My satelite
services. which change i must do in my
Dear Sir/madam,
i have 2 internet connection.1-via lised line (2way) 2-
recive only by
satellite with some valid IP.
now my users ues of lieasd line and i have squid cache and
work correctly.
now i want my users get thire HTTP requests only from My satelite
services. which change
1 - 100 of 108 matches
Mail list logo