Dear Sir,
I want to setup a linux box that has 3 network cards in it...one of
the network cards would be assigned a private ip address and the other
two network cards would be assigned a dynamic public ip address by my
upstream adsl provider. What I want to do is load balance between the
two adsl
ons 2007-09-12 klockan 14:06 +0630 skrev kyaw min:
> I want to setup a linux box that has 3 network cards in it...one of
> the network cards would be assigned a private ip address and the other
> two network cards would be assigned a dynamic public ip address by my
> upstream adsl provider. What I
> Yes, just set up a load-balanced default route in your OS, and policy
> routing to route already connected traffic out via the correct ISP.
> This is not really a Squid question but an advanced routing question.
HEY, henrik is right. Pls see below URL
http://www.linuxquestions.org/linux
>>ons 2007-09-12 klockan 14:06 +0630 skrev kyaw min:
>>
>>> I want to setup a linux box that has 3 network cards in it...one of
>>> the network cards would be assigned a private ip address and the other
>>> two network cards would be assigned a dynamic public ip address by my
>>> upstream adsl prov
Hi Indunil
ok, but (not shure) you have only one ADSL Line right?
I think the solution is ment for backup porpouses, which means:
if the main ADSL Line fails all traffic will be routed to the ISDN Backup Line
In Switzerland the ADSL System is normally built like this:
ENDUSER has a ADSL Router
To: squid-users@squid-cache.org
Sent: Wednesday, September 12, 2007 1:54:21 PM
Subject: [squid-users] Re:Re: [squid-users] How to setup two ADSL line on a
single linux box?
>>ons 2007-09-12 klockan 14:06 +0630 skrev kyaw min:
>>
>>> I want to setup a linux box th
> ok, but (not shure) you have only one ADSL Line right?
YES
I did loadbalance when one connection was Leasedline and the other was ADSL.
--
Thank you
Indunil Jayasooriya
On Wed, 12 Sep 2007 11:34:52 +0200 (MEST)
[EMAIL PROTECTED] wrote:
> as i described below:
>
> it's not possible (at the moment) to open 2 ADSL Ports on the same
> telefony wire... so if you have 2 5 MB Lines you will have still 2
> 5MB Lines after implementing this solution more not) If the Line
On Wed, 12 Sep 2007 14:50:17 +0200 (MEST)
[EMAIL PROTECTED] wrote:
> Hm, but with my method described it won't work so...
>
> If you have 2 ADSL Lines (let's say 5 MBit each ) ) after load
> balacing the bandwidth woud be the same. the only goal is failover
> for the lines more not. Much ADSL Ca
Note this remark
What this will not do:
"This type of spanning will not aggregate bandwidth for a single user. By this
I mean that if you have two 5 meg DSLs you won't magically have a single 10 meg
connection. This is because it routes destination IPs via one of the two ISP
connections, so if
Hm, but with my method described it won't work so...
If you have 2 ADSL Lines (let's say 5 MBit each ) ) after load balacing the
bandwidth woud be the same. the only goal is failover for the lines more not.
Much ADSL Carriers (like Swisscom in Switzerland) limit the bandwith so you
can't go ov
On 9/12/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> it's not possible (at the moment) to open 2 ADSL Ports on the same telefony
> wire...
Agreed.
However, with two dry loops or live lines (or more) it is possible to
bond the circuits together for aggregate bandwidth. That being said,
the
CTED]
Cc: squid-users@squid-cache.org
Betreff: Re: [squid-users] Re:[squid-users] Re:Re: [squid-users] How to
setup two ADSL line on a single linux box?
On 9/12/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> it's not possible (at the moment) to open 2 ADSL Ports on the same
telef
Sorry wrong, you're right, but works only with two different lines (ADSL and
Cable p.a) but not with ADSL,cause this tecnology is a sinlge line solution
in my earlier posts there was a statement about channel bundeling for ADSL
(linke ISDN) and this woud increase the bandwith disscused in german
ailto:[EMAIL PROTECTED]
Sent: Mittwoch, 12. September 2007 15:07
To: squid-users@squid-cache.org
Subject: [squid-users] Re:[squid-users] Re:Re: [squid-users] Re:Re:
[squid-users] How to setup two ADSL line on a single linux box?
Sorry wrong, you're right, but works only with two different lines
Something to remeber:
Most Providers do traffic shaping, which means, more than the limit isn't
possible and the rest will be cutted!
in the past i had a ADSL and Cable Line and for testing porpouses i tried load
balancing, but the speed was'nt doubled (5 MB + 5MB), i reached a maximum of 7
MB
strictly
forbidden.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Mittwoch, 12. September 2007 15:20
To: squid-users@squid-cache.org
Subject: [squid-users] Re:[squid-users] Re:[squid-users] Re:Re: [squid-users]
Re:Re: [squid-users] How to setup two ADSL line
he Nachricht-
Von: Marco Hahnen - ITSM [mailto:[EMAIL PROTECTED]
Gesendet: Mittwoch, 12. September 2007 15:37
An: squid-users@squid-cache.org
Betreff: RE: [squid-users] Re:[squid-users] Re:[squid-users] Re:Re:
[squid-users] Re:Re: [squid-users] How to setup two ADSL line on a
single linux box?
A
18 matches
Mail list logo