Mark wrote :
> could you let me know which IOS version for the cisco
> you are using successfully with your setup..?. i've
> been having problems with multiple versions.. wccp is
> broken in many of them..
I am using IOS version 12. 0
rgrds,
eswari
> i've actually discovered much of the stability for
> wccp in IOS is in some of the older IOS's (12.0, 12.1,
> 12.2), and may of the "T" train versions..
Not sure. But logically, the newer version should be the better. Although
sometimes a new bugs also can be happen.
> the problem with the T tr
--- Awie <[EMAIL PROTECTED]> wrote:
>
> I am using WCCPv1.
>
> AFAIK, it should be OK if you use IOS version higher
> than 12.0.(5).
i've actually discovered much of the stability for
wccp in IOS is in some of the older IOS's (12.0, 12.1,
12.2), and may of the "T" train versions..
the probl
> --- Eswari sharma <[EMAIL PROTECTED]> wrote:
>
> > finally I did with ip_wccp-1.6.2
> > thank u henrik for your valuable advice .
> > I feel gratitude for the help in this squid chain .
>
> could you let me know which IOS version for the cisco
> you are using successfully with your setup..?. i'v
--- Eswari sharma <[EMAIL PROTECTED]> wrote:
> finally I did with ip_wccp-1.6.2
> thank u henrik for your valuable advice .
> I feel gratitude for the help in this squid chain .
could you let me know which IOS version for the cisco
you are using successfully with your setup..?. i've
been havi
Henrik wrote
> On Sun, 5 Sep 2004, Eswari sharma wrote:
>
> > Then I check with command modprobe ip_wccp. It shows the error
> > ---
> > FATAL: Module ip_wccp not found.
>
> Try
>
>depmod -a
>modprobe ip_wccp
>
> Or upgrade to ip_wccp-1.6.2 where this is automated (
On Sun, 5 Sep 2004, Eswari sharma wrote:
Then I check with command modprobe ip_wccp. It shows the error
---
FATAL: Module ip_wccp not found.
Try
depmod -a
modprobe ip_wccp
Or upgrade to ip_wccp-1.6.2 where this is automated (same module,
different makefiles and better READM
Henrik wrote :
>tar zxvf ip_wccp-1.6.tar.gz
>cd ip_wccp-1.6
>make install
>
> Please note that with Fedora Core 2 you don't need to build your custom
> kernel unless you need to change some kernel configuration parameters as
> all the required files is in /lib/modules/.../build (and au
--- Henrik Nordstrom <[EMAIL PROTECTED]> wrote:
> On Wed, 1 Sep 2004, Henrik Nordstrom wrote:
>
> > then
> >
> > depmod ip_wccp
> >
> > to load the module.
>
> Err.. I meant modprobe ip_wccp
Thanks Henrik for your guidance and help
Regards
UX
___
On Wed, 1 Sep 2004, Henrik Nordstrom wrote:
then
depmod ip_wccp
to load the module.
Err.. I meant modprobe ip_wccp
Regards
Henrik
On Wed, 1 Sep 2004, unixware wrote:
These steps work for Redhat Fedora Core which i use
without compiling the whole kernel .
On Fedora Core 2 things is a lot easier than this. The files required for
building custom modules on Fedora Core 2 is found in /lib/modules/`uname
-r`/build, and the Linux-
> Hi everybody,
>
> > Download the entire package:
> >
>
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz
> > It includes a Makefile that should allow you to
> build on kernel 2.6.X
>
These steps work for Redhat Fedora Core which i use
without compiling the whole kernel .
1. ins
On Wed, 1 Sep 2004, Eswari sharma wrote:
Hi everybody,
Download the entire package:
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz
It includes a Makefile that should allow you to build on kernel 2.6.X
1. I downloaded the above tar package in Fedora core kernel 2.6 and kept in
ip_w
Hi everybody,
> Download the entire package:
> http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz
> It includes a Makefile that should allow you to build on kernel 2.6.X
1. I downloaded the above tar package in Fedora core kernel 2.6 and kept in
ip_wccp folder .
2. build the kernel2
On Fri, 27 Aug 2004, Eswari sharma wrote:
I struck up at this step , it generates many errors and warning as given
below :
--
---
---
include/net/sock.h:228: error: storage size of `sk_error_queue' isn't known
include/net/sock.h:238: error: storage size of `sk_peercred' isn't known
Have you really
On Fri, 27 Aug 2004, Eswari sharma wrote:
Dear all,
Thank you for your reply.
As You said I download the module at
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c
and (patch ) compile Fedora 2 kernel-2.6.5-1.358 with the given below
command and it generates many errors and warning.
See mai
> make[1]: *** [/usr/src/ip_wccp/ip_wccp.o] Error 1
> make: *** [/usr/src/ip_wccp] Error 2
>
as far i know . do you have kernel source installed ?
___
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.
Download the entire package:
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz
It includes a Makefile that should allow you to build on kernel 2.6.X
Sean
Unixware wrote :
> A quick investigation of Linux-2.6 build model showed
> that the following
> simple procedure works for compiling ip_wccp for your
> kernel:
> 1. Build and test your kernel. This is required in
> order to correcly
> build
> additional modules..
>
> 2. Create a directory somewhere
> and (patch ) compile Fedora 2 kernel-2.6.5-1.358
> with the given below
> command and it generates many errors and warning.
these gcc lines wont work on kernel 2.6 here the way
which Henrik have suggested
A quick investigation of Linux-2.6 build model showed
that the
following
simple procedur
Dear all,
Thank you for your reply.
As You said I download the module at
http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c
and (patch ) compile Fedora 2 kernel-2.6.5-1.358 with the given below
command and it generates many errors and warning.
-
gcc -D__KERNEL__
You need to use the ip_wccp.c file linked from the FAQ.
Regards
Henrik
On Thu, 26 Aug 2004, Eswari sharma wrote:
Hi Squid Users/Henrik,
I recently upgrade to kernel 2.6.0 but i cant patch with
ip_wccp-2_4_18.patch . It shows me the error as given below
--
(Stripping trailing CRs
22 matches
Mail list logo
