> Your track ok now?.
Right as rain!
> How many of my neighbors cats should I bring, just in case?.
> How about a Yorkshire Terrier?. Or a Ferret?.
Actually I would like to see a Ferret!
> I assume you are providing drinking cups?.
Refreshments and li
Gary,
Reference your Steamup on Saturday;-
Your track ok now?.
How many of my neighbors cats should I bring, just in case?.
How about a Yorkshire Terrier?. Or a Ferret?.
Tally Ho!. Yoiks!
I assume you are providing drinking cups?.
To
If you are working with a finished wall, be sure that whatever you are using
goes past the finish and into the structure. In my at-work office, a
bookcase was mounted onto a finished block wall with the expanding lead
anchors -- but they were only into the stucco/morter finish coat and not the
bl
Harley, By jove , I think you've got it!
Geoff.
I had a whole wall of shelves come down on me with the self tapping anchor
>screws. The hole gets enlarged as the drill point wears, and in old concrete
>the holes are crumbling on the surfaces.
>Best anchor is lag bolts and expansion shield inser
I had a whole wall of shelves come down on me with the self tapping anchor
screws. The hole gets enlarged as the drill point wears, and in old concrete
the holes are crumbling on the surfaces.
Best anchor is lag bolts and expansion shield inserts. The expansion shields
are about 3/4" long. I have
Ferdinand Mels wrote:
>
> My 2 cents worth US. ( several hundred Canadian )
Actually, about 3.5 cents CDN, Ferdinand! (:-)))
Cheers,
Walt
The Blue screws are really great for floors where the wieght is minimal.
I have if you have a clean hole put them into walls and you would have a hard time
getting them out. Last summer I put stairs to water behind the house. Our waterfront is
300 feet of 18-20 foot limestone cliffs. I needed a h
You did not define what you are trying to attach, if
the stress level, torque or shear is moderate then I
recommend that you consider one of the two part
epoxy's that are available at OSH or Home Depot. I
have used them in the past and have not had any
problems however I am not trying to support
It seems that all electric hand-drills now come with at least Hammer, Reverse, and
stepped Variable
speed - even the "budget specials".
Sometimes overlooked is that, if you use tungsten carbide tipped lathe tools, you have
a green wheel for
sharpening them. Giving TC masonry bits the once-over
Hammer drill and impact drill are one in the same, different nomenclature.
If this is a one shot deal rent one, any one. If you're a tool hound, like
some guys :>), hustle down to Home Depot and peruse their hammer drill
selection and bring home another important guy tool.
Jim
At 11:17 AM -0400 6/22/01, [EMAIL PROTECTED] wrote:
>If it is a carbide tipped bit, the quality is proportional to the price. If
>you are using Tapcon screws, use their bit.
Ah yes ... I did use the blue Tapcon masonry screws and while I
purchased a bit that was "designed for use with Tapcon ma
If you have never used "TAPCON" brand masonry screws, try some. They are
great but using the proper size drill is essential.
Walt
Ok here comes the resident handyman on this list. I assume you mean those
blue concrete screws that are out now. Well, the drill bits that they sell
for those, although a bit pricy, aren't worth a damn! I have had them bend,
break, and dull more times than I care to mention. The best that I
Dave,
If it is a carbide tipped bit, the quality is proportional to the price. If
you are using Tapcon screws, use their bit. My neighbor & I put up hurricane
shutter frames on both houses and used only one tapcon bit. It helps if you
have a hammer drill, the carbide does not get as hot and the
Dave:
Most times those type of drills work better in an impact type pistol drill.
Jim
Dave Cole wrote:
> and a handful of self-tapping masonry screws.
> The first couple of holes went fine and the screws seemed to work OK,
> but by the third hole the bit was obviously becoming dull and by the
> fifth hole, that bit was done.
>
I don't think that masonry bits can drill a hole o
Gang:
Somewhere along the line in my basic set of handyman techniques, I
never got the memo on how to fasten things to cement or masonry.
I have a couple of projects pending, both of which need to somehow
attach things either to a cement wall or to a cement patio.
A couple of weekends back I
17 matches
Mail list logo