Dear Sumo User
I am creating a simple network and install pedestrian crossing.
Even if I checked the priority in pedestrian crossing, it didn't activate
with only red color. And I got the message the following.
"Warning: Invalid pedestrian topology: crossing ':1_c0' has no target."
I am struggl
The 'has no target error' is proably due to a lack of sidewalks that would
connect to the crossing. Please see
http://sumo.dlr.de/wiki/Simulation/Pedestrians#Building_a_network_for_pedestrian_simulation
2018-07-31 14:24 GMT+02:00 sung hyun Jang :
> Dear Sumo User
>
> I am creating a simple networ
Dear Jakob Erdmann
I created sidewalks for pedestrians like the sumo example of pedcrossing.
They are connected to the junction that pedcrossing was installed. In case
that adding sidewalks to the exsiting edge works..but separated sidewalks
didnt work. That is the reason why I asked you.
Above a
Please ensure that pedestrians are forbidden on road lanes. Otherwise they
will ignore the crossings.
2018-07-31 15:37 GMT+02:00 sung hyun Jang :
> Dear Jakob Erdmann
>
> I created sidewalks for pedestrians like the sumo example of pedcrossing.
> They are connected to the junction that pedcrossin
Hello,
in your network, edge EC allows all vehicle class including pedestrians
(allow="all"). For that reason a crossing cannot build built at that edge.
It works for edges WC & CW because they disallow pedestrians.
To fix it, use the inspect mode of netedit, click on edge EC and then click
on the
Thank you so much for your quick reply!
I checked the edge that you mentioned. It works well :)
I think I checked all.. I didn't.
I will check others based on your explanation including pedestrian islands.
Have a good day!
Best regards,
Sunghyun Jang
On 1 August 2018 at 10:17, Jakob Erdmann wr