Hi, David,
thank you very much for your hints and helpful suggestions. Yes, I made
my homepage with a very old page-generating tool. Now I know what to do
and I will do that as soon as I have some free time.
Once more many thanks for your help and best wishes
Helmut
Am 23.08.2015 um 19:24 s
In message <55d9cd4c.8030...@utanet.at>
Helmut Sonderegger wrote:
>
> You can download the free software from my homepage http://www.helson.at
>
> But I must tell you that BitDefender supposes my homepage is malware.
> Therefore I tested my homepage with https://www.virustotal.com/.
Hi Ray,
I just came home from a longer holiday and found the discussion on rhe
Hollander Dial.
My software "SONNE" calculates Hollander Dials too. I calculates
horizontal and vertical Hollander Dials (also declining vertical). In
some cases the angle of the cone apex becomes very important f
gton Crescent, North Vancouver BC V7R 3B3 Canada
brianalbin...@shaw.ca
--
From: "Ray"
Sent: Wednesday, August 19, 2015 10:42 AM
To: "Roger Bailey"
Cc: "Dan Uza" ;
Subject: Re: Metal cone
Hi Roger,
I did a search
Hi Roger,
I did a search for "NASS Compendium 14-2 "Hollander Dial Software";
unfortunately the link to find a DeltaCAD marco was not available or I
missed it, or perhaps you have to be a member of the North American
Sundial Society to access it. Do you have a direct link to the Marco
for the Hol
Hi Dan,
As you consider conical gnomons, pay attention to the conical sundials of
Hendrik Hollander, the winner of the 2006 Sawyer Award. His conical bi-gnomon
sundials could tell clock time. Here is the note on his award.
"The 2006 Sawyer Dialing Prize has been awarded to Hendrik Hollander fo
’ 40” W
From: sundial [mailto:sundial-boun...@uni-koeln.de] On Behalf Of
tonylindi...@talktalk.net
Sent: 16 August 2015 10:56
To: sundial list
Subject: RE: Metal cone
Hi Dan,
For a larger cone I would consider making a wooden 'pattern' taken
to a foundry for
se special rulers graduated to
allow for this which cause havoc if allowed to 'escape' into a general
workshop. How do I know this??? :-(
Tony Moss
Original Message
From: sasch...@hotmail.com
Date: 15/08/2015 18:40
To: "Dan Uza", "sundial list"
Subj: RE
Hi Dan, you didn't say how big you were looking for. For small sundials you
can use the cone used for jewelry display to hold rings and bracelets.
They are even available in clear plastic. sasch stephens
Date: Sat, 15 Aug 2015 21:16:41 +0300
Subject: Metal cone
From: cerculdest...@gmail.com
T