Bjoern Rost wrote:
Can anyone tell me why, or point me to relevant info, SRSS must be
installed onto a non-global zone only?
dhcp server can only be installed in global zones. That could be a
reason.
not now, in S10U5, dhcp server can be installed in a zone.
_
William Yang wrote:
would I be correct in
thinking that installing the client will literally be a 5-minute
"take it out of the box and plug it in" affair?
Probably. Without knowing anything else about your configuration that's
about all I can say.
it depends also on what you entered when yo
hello all,
i'd like to talk again about this very interesting old post:
http://www.mail-archive.com/sunray-users@filibeto.org/msg03031.html
my config is:
V440 Sol10 SRSS 3.1
V210 Sol10 SRSS 3.1
and we don't use smart cards, so when a DTU displays v210's login
screen, it never change even if load
hello all,
a user here has plugged a 8Gb usb drive, and he complains because some
files don't appear in the file manager.
Is there a limitation about the size of the drives on sunrays?
thanks in advance,
gerard
___
SunRay-Users mailing list
SunRay-Us
hello all,
i have to do it on a machine where SRSS 3.1 is configured with CAM only.
I found this thread related to it:
http://www.filibeto.org/pipermail/sunray-users/2006-August/004378.html
and i'm wondering if there is a better solution now?
I have to change the hostname of the running machine,
Bob Doolittle wrote:
back but dtlogin was already headed for EOL so it was never pursued.
There's no chance of it being pursued today, so close to it's actual end
of life (sometimes these things take longer than anticipated). gdm
that's the first time i hear about dtlogin EOL'ed! Do you kn
hello all,
i have a sun ultra 20 with S10U4 and SRSS 3.1.
With liveupgrade, i did the upgrade to SXDE4.
After rebooting SXDE4, i notice that utauthd isn't starting:
In /var/opt/SUNWut/log/auth_log, there is:
Cannot find /etc/opt/SUNWut/jre/bin/java
but this message was also present in S10U4.
and
P.S.M. Swamiji wrote:
Gerard Henry wrote:
Seth Galitzer wrote:
Gerard,
If you know the device name, you should be able to run mkfs -F pcfs (or
just mkfs_pcfs) on it. Doesn't matter if you're on a DTU or not, the
device is still visible via the USB bus.
are you sure? here are my results on
Bob Doolittle wrote:
This warning was created to address CR 6556434,
and was presented in patch streams
119280/119281-14. If you have a service contract,
I encourage you to log a call and request that a
bug be opened, so that we get the necessary push
back. Perhaps at minimum this could be ad
Gérard Henry wrote:
hello all,
i'm unhappy after applying some patches on my sunrays servers (S10U2
sparc).
119280-14 CDE 1.6: Runtime library patch for Solaris 10
119418-04 GNOME 2.6.0: Gnome On-screen Keyboard Patch
119900-04 GNOME 2.6.0: Gnome libtiff - library for reading and writing
hello all,
i'm unhappy after applying some patches on my sunrays servers (S10U2 sparc).
119280-14 CDE 1.6: Runtime library patch for Solaris 10
119418-04 GNOME 2.6.0: Gnome On-screen Keyboard Patch
119900-04 GNOME 2.6.0: Gnome libtiff - library for reading and writing TIFF
119906-11 Gnome 2.6.0:
hello all,
i'm securing a sunray server machine, and i notice that i block every
multicast packet (repeated every 20s):
Oct 4 09:51:27 servA ipmon[9677]: [ID 702911 local0.warning]
09:51:26.681622 bge0 @0:8 b XX.XX.XX.XX,7009 -> 224.101.101.101,7009 PR
udp len 20 339 OUT
Is it necessary to h
James Tan wrote:
Hi,
found this and will test if this would work. Not sure if the dynamic
SRSS userids e.g. utcuX will destroy any new profile created and thus
defeat the solution below. Thanks for any advise.
.1 Create a profile
//bin/firefox -|-ProfileManager|
.2 //bin/firefox -p
http:
hello all,
i have a solaris 10 machine with SRSS 3.1
I applied "netservices limited" and in the first time, sunrays continue
to work normally. But now, i have no session, and sunray are stucked at
code "21"
bibcmi-root% /opt/SUNWut/sbin/utsession -p
/opt/SUNWut/sbin/utsession error: No session
ah, this printer isn't a postscript printer! it uses ZJS protocol
http://www.planetamd64.com/index.php?s=3fee444d27c394a75b85b95a359cdaef&showtopic=30473&pid=305199&st=0&#entry305199
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.fil
engin onay wrote:
Yes we tried but did not work.
take a look at:
http://www.mail-archive.com/sunray-users@filibeto.org/msg00534.html
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
Phillip Steinbachs wrote:
What I want to do is to use XFCE on solaris 10 update 3 (SPARC), this,
as sole windows manager for our sunray service.
Anybody got experience with this?
For pre-compiled packages, your best bet for now would be
http://blastwave.org/. The version of XFCE they ha
hello all,
i post two messages about it, but got no answer:
http://www.mail-archive.com/sunray-users@filibeto.org/msg06373.html
http://www.mail-archive.com/sunray-users@filibeto.org/msg06374.html
anybody can help me?
thanks in advance,
gerard
___
SunR
ok, i replace line:
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib;export LD_LIBRARY_PATH
by
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/csw/lib;export LD_LIBRARY_PATH
in the script /opt/SUNWutRC/admin/remoteuser
but, after having:
CTRL+C to stop controlling Display :2.0
*Please remember to log
hello,
i'm giving it a try on solaris 10 6/06 machine (sun ultra 20 opteron)
I've got into troubles:
- logged as root on ultra 20, i launch /opt/SUNWutRC/admin/remoteuser
and got this error:
"Attempting to remote control gerard on Display :2.0
Full Control password is *** Only password is
hello all,
today, i'm using dtlogin as login manager on solaris server.
But looking at gdm at blastwave, i read this comment:
o SunRay (SRSS) support via gdmdynamic.
Is anbody know if gdm is usable on sunray now, or is iut only available
on linux? but blastwave is only for solaris?
thanks
gera
Stefan Varga wrote:
try is to run startxfce script with
unset UTAUDIODEV
unset AUDIODEV
xfce is compiled with linux sound devices so you need to workaround the
start of xfcepanel
thanks for your reply
there is no startxfce script, but instead /opt/csw/etc/xdg/xfce4/xinitrc
I added
unset UT
hello all,
i'm trying to replace CDE by Xfce
here my config:
- sun ultra 20 solaris 10 U2
- SRSS 3.1
if i log into ultra20, everything is ok, panel appears
if i log into sunray, panel never appear
i looked at archive
(http://www.mail-archive.com/sunray-users@filibeto.org/msg05348.html),
but t
[EMAIL PROTECTED] wrote:
hi,
ive always used a perl script i found called "printceptor" that when used as
the print command in various apps (as opposed to lp etc), brings up a simple gui chooser
where the user can choose a printer and then sends the output to the printer.
is anyone aware of a
Thierry Delaitre wrote:
Hi,
After upgrading Sol10 to the latest patches using updatemanager, i can see
that all users now have a /usr/bin/java -jar /usr/lib/patch/swupna.jar -wait
process and icon in their desktop.
How can i disable this for all users ?
i'm sure that this issue is known, bu
Andreas Höschler wrote:
Hi Gerard,
I have downloaded the evince source but have no idea how to build it.
There's no ./configure script and no INSTALL file that might give me a
clue. Any ideas?
i use it from blastwave (blastwave.org), i never compiled it.
[EMAIL PROTECTED] wrote:
also how do people find xpdf performs on the x86 platform?
evince. It's not perfect, fullscreen don't work, and sometimes is unable
to display documents correctly. But it is better than gpdf or xpdf
___
SunRay-Users maili
Thierry Delaitre wrote:
My JDS session has been running for several months and does not get
killed. Although, i do agree that it is more tricky with JDS user to open
several session at the same time whereas CDE can handle this without any
problems.
yes, that's right.I have 3 users that use JD
Bob Doolittle wrote:
> Paul Whitener wrote:
>> Any update on this Bob?
>>
>
> Sorry, not sure what update you're expecting.
> In the context of this thread, Gerard should install the
> patch and get back to us whether the problem is
> resolved or not.
hello all,
i installed the patches, but ag
hello all,
since few days, some apps (firefox, acroread,...) take more time to launch:
- usually it takes around 10 secs
- now it take more than 1 minute (and nearly 5 mn if we use JDS instread
of CDE)
so the system become unusable for our users
swap is ok, load seems correct
Here our config:
SRSS
Rob Giltrap wrote:
> They are no longer valid under Solaris 10.
>> set shmsys:shminfo_shmmax = 0x200
>> set shmsys:shminfo_shmmni = 0x1000
>> set shmsys:shminfo_shmseg = 0x100
>>
>> Are these still valid for Solaris 10?
>>
i'm not agree with you. On 2 machines (v440 and v210) one
upgraded fro
hello all,
since one day, users experienced slowness when launching apps like
mozilla, acroread...
No abnormal load, but in messages:
Jun 12 10:56:07 calypso utpushd[14789]: [ID 753682 daemon.error] Error:
ldap_cram_md5_bind_s for -old:7012 failed: Can't contact LDAP server
Jun 12 10:57:07 calypso
hello all,
i have two servers with SRSS 3.1 solaris 10 (v440 and E280)
They belong to the same group
This morning, rebooting the primary server, i got this messages during boot:
May 5 06:50:55 calypso dtlogin[2416]: [ID 118685 user.error]
pam_sunray_amgh::[DPY=4] ERROR in _populate_amgh_args re
Joe Reid wrote:
So I was looking at my monthly electric bill, at $200 for a tiny condo
and wondering if maybe it's time to change out all my old hardware
(Ultra2 with D1000 and SunBlade 1000) for some newer stuff
How is the T1000 as a SunRay Server? Does the lower FPU count affect
usability
hello all,
this morning, after power-on my server, SRSS refuses to serve sunray,
and i got:
Feb 28 09:37:37 ultra20 utauthd: [ID 396582 user.info] WatchIO
UNEXPECTED: Connection from 192.168.128.209 is not allowed
Feb 28 09:37:37 ultra20 utauthd: [ID 326961 user.info] WatchIO
UNEXPECTED: 192.16
hello all,
i first installed a v440 as a sunray server (s10, SRSS3.1)
then i added a v210, and try to configure a failover group, but it don't
work.
infodoc 75517 says:
"But if you previously had a standalone server, then it was generated
randomly and you should run utconfig -u and then utconfi
Shivu Vibhuti wrote:
Packages required:
SUNWlibusbut - this Sun Ray specific package is installed as part of the
SRSS (3.0+ releases on Solaris)
SUNWlibusb - this platform-independent package is provided in the
Supplemental directory of the SRSS image. If the target system does not
already ha
hello all,
here we have a "student's project" to make gnome-meeting available on
sunrays.
At the beginning is the project of eric mousserion, who wrote a webcam
driver for solaris 10: http://openresources.info.ucl.ac.be/solaris_usb
The project will start soon, so i don't know at now what is pos
Ashley W wrote:
Can you mount & use this disk on the laptop ?
When you insert it into a Sun Ray, do you see any messages in either of
these log files ?
/var/opt/SUNWut/log/utstoraged.log
/var/opt/SUNWut/log/utmountd.log
Ideally, any disk that works on Solaris when plugged in directly to the
s
hello all,
we use CDE, and i want to do something graphical to help my users using
usb drives.
First, i modify /etc/dt/config/sys.dtwmrc, in adding two entries in menu:
"Mount"f.exec "/usr/dt/bin/dtfile -folder
/tmp/SUNWut/mnt/$USER"
"Umount..."
[EMAIL PROTECTED] wrote:
It should be safe to mark an in-use address "unusable" provided
that you then wait for its lease to expire before telling the new
server to issue that address. Just marking a leased-out address
"unusable" and immediately telling the new server to issue that
same add
Paul Hutton wrote:
You can do this from a shell by redirecting its DISPLAY variable and you
don't need to be root.
E.g. on the target SunRay enter:
echo $DISPLAY
this will return something like
:23.0
also enter:
xhost +
(shotgun approach to enabling x display redirects, for more secure
usa
Ashley W wrote:
In order to debug this, can you do the following & send results ?
ok i'll do it next week
thanks for your help,
gerard
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
Thanks for your reply. I apologize for a typo in subject, it concerned
sparc machine (v440), not solaris x86, sorry
[EMAIL PROTECTED] wrote:
"Gerard Henry" <[EMAIL PROTECTED]> wrote:
when on apple macosx, if i copy a file with spaces in name, my key
become unusable on sunray (but works well o
Hi All,
i have a sun ultra 20 witho solaris 10 3/05, and Sun Ray Server Software
3.1 installed on it.
a strange behaviour appears every times (almost) i power on the machine.
After few minutes of work on my sunray appliance, the CPU vntilator of
sun ultra 20 begins to cycle every 3,4 seconds betw
David Mackintosh wrote:
The W1100z systems are way too expensive for me; also I'm not really
comfortable with them as a client of mine ordered a whack of them
hand has experienced gratuitous problems with them. I like the look
of the U20 systems, but they price out at about twice what the
entry
Hi All,
i got an sun ultra 20, with solaris 10 3/05 (x86) on it.
I installed SRSS 3.1 on it, and everything went fine.
But now, when i power up the ultra 20, the usb keyboard and mouse are
unusable, but on appliance, every is ok.
The only workaround i found, is to type:
b -r
at solaris boot
and
Hi All,
i need to have a little idea of what is necessary to buy to work with
linux as srss
actually, we use a sparc v440 machine (4 proc, 16go ram) with 60
appliances. I think i can have more appliances on it.
People using other thin clients solutions tell me they bought a pc for
2000 euros.
A
[EMAIL PROTECTED] wrote:
Which button are your users pressing? The one labelled "Auto" will
produce a dialogue that says "Not Available".
The button labelled "Menu" should offer a whole range of setup
choices. The up/down arrows on their own (when the Menu is not
active) should adjust the
machine: Sun W2100 sol 10 x86 GA, i'm using shared network config.
primary interface is bge0
executing utinstall, everything went fine, no error in
/var/adm/log/utinstall.2005_05_26_13:10:45.log
w2100-root% ./utadm -A 192.168.20.0
... blahblah...
router: 192.168.20.1
alter
Hello,
a question about usb drives and their useability under sparc server:
a user had already used with success a usb drive.
But now, when he plug it, he see nothing in /tmp/SUNWut/mnt/ and
in /var/adm/messages:
May 10 08:53:59 serengheti pcfs: [ID 269451 kern.info] NOTICE: pcfs: FAT
signature e
Meik Hellmund wrote:
I have a problem connecting USB printers to SunRays using the CUPS
printing system on Solaris 9/SRSS3.
have you tried printmgr in /usr/sadm/admin/bin?
i used it with hp1300 and lexmark optra m410
did you look at:
http://docs.sun.com/source/816-6753-10/dev.html
when you plug u
Hello,
this work well since SRSS3.0 but a question about unmounting it
until today, i told my users to simply unplug their devices without
nothing to do, (because in linux, they used to do "unmount /media/usb").
I proceed as in:
- create a symlink in home dir
% ln -s /tmp/SUNWut/ cleusb
so they ca
Jimmy Fox wrote:
shouldn't the path be /tftpboot?
yes sure, it's a typo...
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
[EMAIL PROTECTED] wrote:
"Gerard Henry" <[EMAIL PROTECTED]> wrote:
in SRSS 2.0 (solaris 9), wheel mouse works correctly, and before
deploying SRSS3.0, i'm testing on a sun blade 100 (solaris 9) and
all appliances attached with the same wheel mouse and scrolling
isn't working in firefox/staroffic
[EMAIL PROTECTED] wrote:
"Gerard Henry" <[EMAIL PROTECTED]> wrote:
hobbit-root% smpatch add -i 114880-06
add patch 114880-06
One or more patch packages included in
114880-06 are not installed on this system.
but in README, there is no dependancy patch, what's the matter?
config: solaris 9 9/04, SR
[EMAIL PROTECTED] wrote:
Thomas Glanzmann <[EMAIL PROTECTED]> wrote:
SRSS 3.0 Beta is gone from Suns websites. Will it come back or is it a
sign for a near 3.0 release?
There's no general rule. In this case the release date is getting close.
I don't know whether the 3.0 release date will be one
57 matches
Mail list logo
