Maybe it's the u-boot bug, killing off usb completely? ->
http://n2.nabble.com/Om-2008.8%3A-usb%3A-unable-to-enumerate-USB-device-tp680918p719848.html
But I find no other [older/testing?] u-boot to try out with. Could you
guys recommend any flavours?
Yesterday I have reflashed kernel from
Jim
> I already tried all that, including the python script. I've tried everything
> on the bluez wiki and
> the OM wiki.
ok
> Is there a better version of bluez utils? I could easily build a new version,
> but I suspect I also
> need to build a new kernel if I go that route. There is no menti
Brad Midgley wrote:
> Jim
>
> The best fit for this older version is talking to the service via
> d-bus. At one point I had python and d-bus working well enough to fire
> off the audio service as in the example at
> http://wiki.bluez.org/wiki/HOWTO/AudioDevices#python1
>
> Combined with the right
Jim
The best fit for this older version is talking to the service via
d-bus. At one point I had python and d-bus working well enough to fire
off the audio service as in the example at
http://wiki.bluez.org/wiki/HOWTO/AudioDevices#python1
Combined with the right state file, you should get a blueto
Hi Christopher,
Christopher Allan Webber escribió:
> If you install Debian, it comes with FSO (and pretty much looks the same
> out of the box), but you have access to all of debian's packages. From
> there you could install either xpdf of evince
>
> sudo apt-get install evince
> sudo apt-get ins
Hi,
Rod Whitby escribió:
> Offray Vladimir Luna Cárdenas wrote:
>
>> I'm using FSO Milestone 2
>>
> ...
>
>> I want to use my Freerunner for my classes and for that I need, for the
>> moment, a pdf reader and an spread sheet.
>>
>
> epdfview is in the fso feeds at shr.bearstech.co
eerunner. Are there any other exotic variations of that in your host
PC dmesg or is it only that?
| Last time tried with:
| u-boot,rootfs (20080902) -- from Openmoko_update page
| kernel (20080902, too) -- from daily page.
| (!)With the 20080826 kernel from releases/_update page says wrong image
|
Sebastian M. wrote:
> Quoting "Marco Trevisan (Treviño)" <[EMAIL PROTECTED]>:
>> Which distributor will give you them as warranty fixes?
> In Germany (and the whole European Union, I guess) the retailers are
> forced to give a 2 years warranty and because of that they have to
> replace goods wh
Offray Vladimir Luna Cárdenas wrote:
> I'm using FSO Milestone 2
...
> I want to use my Freerunner for my classes and for that I need, for the
> moment, a pdf reader and an spread sheet.
epdfview is in the fso feeds at shr.bearstech.com
-- Rod
___
sup
On Mon, Sep 1, 2008 at 6:03 PM, Rob Tymensen <[EMAIL PROTECTED]> wrote:
> On Mon, Sep 1, 2008 at 8:39 AM, Richard Cooke
> <[EMAIL PROTECTED]> wrote:
>>
>> I have flashed FSO milestone 2 and changed the .conf files in /etc/opkg to
>> point to the fso-testing feed at shr.bearstech.com. opkg update se
;m getting `device descriptor
read/64, error -110' and no solution found out there on the net helps.
Last time tried with:
u-boot,rootfs (20080902) -- from Openmoko_update page
kernel (20080902, too) -- from daily page.
(!)With the 20080826 kernel from releases/_update page says wrong image
fo
2008/9/2 Chris Jenks <[EMAIL PROTECTED]>
> I haven't researched the keyboard problem - I assume I need a powered
> hub, but I'll read. No need to address that here.
By the default, the Neo is in device mode. You have to put it into host mode
and give power to the usb port. See here for the com
problem with a tar is: not easy to see the relevant informations at a
first glance. who goes around untarring files attached to dubious bug
reports?
2008/9/2 Matt <[EMAIL PROTECTED]>:
> I'd suggest going further and having a tool which gathers logs, file
> versions, config files, some hardware dia
I'd suggest going further and having a tool which gathers logs, file
versions, config files, some hardware diagnostics, etc
Tar all the results and attach them to support tickets.
~ Matt
Thorben Krueger wrote:
> Could someone perhaps whip up a shellscript to be run on any OM
> installation to d
So um, how do you reset the eeprom? I'm sorry, I don't have much experience
in this error.
Also, I was thinking that ft2232 was not enabled for my openocd build and
when I tried to build openocd from the source code with ft2232 enabled, I
kept getting random errors. So, I just used apt-get install
Could someone perhaps whip up a shellscript to be run on any OM
installation to determine the answers to most (technical) FAQs?
This would help people a lot with communicating issues.
(For instance, I have totally forgotten which uImage is currently
residing in my FR, or even which uboot version.
If you install Debian, it comes with FSO (and pretty much looks the same
out of the box), but you have access to all of debian's packages. From
there you could install either xpdf of evince
sudo apt-get install evince
sudo apt-get install xpdf
I'm not sure how well openoffice, that beast, would
On Mon, Sep 1, 2008 at 6:33 AM, Lynn Nguyen <[EMAIL PROTECTED]> wrote:
> Hey All,
>
> I was wondering if anyone was using the Neo1973 (GTA01v4) with Debug board
> v3. I used the openocd.cfg available on the wiki and I get this problem:
> Info:openocd.c:82 main(): Open On-Chip Debugger (2006-08-
thanks
2008/9/2 "Marco Trevisan (Treviño)" <[EMAIL PROTECTED]>
> Thomas Bertani wrote:
> > On my fr, with om 2008.8 update the boot failed a lot of times,then it
> > boots but when I remove battery to shutdown (for freeze) and then I
> > boot, I have to reboot it a lot of times for get it booting
Tony, any idea what that error means? I searched a little and failed to
find.
Lynn Nguyen wrote:
>
> I get:
>
> [ 459.596147] usb 3-1.3: new full speed USB device using uhci_hcd
> and address 27
> [ 459.744465] usb 3-1.3: device not accepting address 27, error -71
>
>
> I don't
Thomas Bertani wrote:
> On my fr, with om 2008.8 update the boot failed a lot of times,then it
> boots but when I remove battery to shutdown (for freeze) and then I
> boot, I have to reboot it a lot of times for get it booting correctly,
> it stops booting when serverx starts...
I got this too
On Sun, 31 Aug 2008, archon44 wrote:
> Chris Jenks wrote:
>>
>> I seem to have successfully installed debian on my SD card and am able to
>> boot to zhone, but when I try to ssh to [EMAIL PROTECTED] it won't take a
>> blank password. I am able to login to 2008.8 from the same host
>> successfully
Hi all,
I'm using FSO Milestone 2 and is the most beautiful and quick image of
the three (ASU/Gtk/FSO) I have probed. The dialer is the only
application with problems in responsiveness (almost 5 seconds to launch
compared to the almost instantaneous of the other ones) and the first
digit of th
On my fr, with om 2008.8 update the boot failed a lot of times,then it boots
but when I remove battery to shutdown (for freeze) and then I boot, I have
to reboot it a lot of times for get it booting correctly, it stops booting
when serverx starts...
___
s
What I think happens is what I stated in my original mail. ;) Each
application that has registered a doLayout() callback with the gesture
listener gets laid out again and therefore each component of the layout will
know it's new position and dimension so that touch screen events for it can
be id
Quoting "Marco Trevisan (Treviño)" <[EMAIL PROTECTED]>:
> Ole Kliemann wrote:
>> Unfortunately I cannot help you. Just can tell you that I have exactly
>> the same problem. I'm now waiting for the fix for the GSM-buzz, so I can
>> send the FR to my distributor and get both the GSM and GPS fixed. ;
On Tue, Sep 02, 2008 at 07:39:09PM +1000, Matt wrote:
> Firstly thank for posting the code, very intresting to pore over.
>
> However, it has not worked for me.
> Any ideas ?
Many... the most common problem for me is a very high interrupt load;
more than 1000 per second in powertop. But there are
Hi all
do anyone has any idea on this issue ?
http://pastebin.com/m33955460
--
Armin ranjbar , System Administrator
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
Firstly thank for posting the code, very intresting to pore over.
However, it has not worked for me.
Any ideas ?
debian-gta02:~# python ogpsd_methods.py
Traceback (most recent call last):
File "ogpsd_methods.py", line 8, in
constatus =
obj.GetConnectionStatus(dbus_interface='org.freedes
29 matches
Mail list logo
