So um, how do you reset the eeprom? I'm sorry, I don't have much experience in this error.
Also, I was thinking that ft2232 was not enabled for my openocd build and when I tried to build openocd from the source code with ft2232 enabled, I kept getting random errors. So, I just used apt-get install openocd instead. I figured most people just used apt-get install and so that should be alright right? Lynn On Tue, Sep 2, 2008 at 11:47 AM, Kees Jongenburger < [EMAIL PROTECTED]> wrote: > On Mon, Sep 1, 2008 at 6:33 AM, Lynn Nguyen <[EMAIL PROTECTED]> wrote: > > Hey All, > > > > I was wondering if anyone was using the Neo1973 (GTA01v4) with Debug > board > > v3. I used the openocd.cfg available on the wiki and I get this problem: > > Info: openocd.c:82 main(): Open On-Chip Debugger (2006-08-01 12:00 > CEST) > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_device_desc not found > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_layout not found > > Info: configuration.c:50 configuration_output_handler(): Command > > ft2232_vid_pid not found > > Error: jtag.c:1219 jtag_init(): No valid jtag interface found (ft2232) > > > > It seems like openocd is having some trouble with ft2232 because I don't > see > > anything wrong with those commands. > > yes , perhaps libft2232 is not enabled in you openocd build? > > > greetings > > _______________________________________________ > support mailing list > support@lists.openmoko.org > https://lists.openmoko.org/mailman/listinfo/support >
_______________________________________________ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
