Hi all,
On one system I'm trying to install pfSense on usb key. The procedure goes ok
(lots of synchronize cache failed msgs tho) and I can boot from usb afterward
just fine. But if I enable serial port via webui, I cannot boot from usb
anymore. Bios just sits there with | (and not spinning
Yep.
This is confirmed to work.
I was looking at the pppoe configuration in a bit more detail as well.
I configured with a subnet of /25 yet pppoe only seems to make 15
configurations in the mpd.conf. the man page seems to reference that you
don't need to make them all but I was a little
This is a known issue in the way the GUI code handles the ACLs in
squid.conf. The solutions for this have been covered exhaustively on both
this list and the forums. Since Mike Capp has already indicated that he is
completely re-writing this package, the best solution would be to wait until
his
I have two different pentium 200 systems here I'm trying to install pfSense
on, but on both systems, it spontanously reboots when the BTX loader should
start loading the kernel. I feels like there's a line of text there in the
moment before crash, so I'd suspect it actually starts the kernel, but
Szasz Revai Endre wrote:
Hello,
What's pfsense doing at night? Sometimes pfsense starts a find
command, and it keeps working on and on for a few minutes. I don't
remember what the command was. Though I see no cron job or anything.
What starts the find command?
Endre
lbe8010# cat
Well if you think it could be a general FreeBSD issue, the best was to test
would be to just create a FreeBSD cdrom. You can download the ISO from here.
ftp://ftp11.freebsd.org/pub/FreeBSD/ISO-IMAGES-i386/6.0/6.0-RELEASE-i386-disc1.iso
If you can try to install it. My thinking is it should
Run a update_file.sh /etc/crontab then reboot your machine. We
removed the periodic scripts.
Scott
On 12/19/05, Rainer Duffner [EMAIL PROTECTED] wrote:
Szasz Revai Endre wrote:
Hello,
What's pfsense doing at night? Sometimes pfsense starts a find
command, and it keeps working on and
Oh thanks, I totally forgot about that..I was doing:# crontab -lcrontab: no crontab for root:)Still where does the `find` come from?On 12/19/05,
Rainer Duffner [EMAIL PROTECTED] wrote:
Szasz Revai Endre wrote: Hello, What's pfsense doing at night? Sometimes pfsense starts a find command, and it
Oh okay, thanks Scott !On 12/19/05, Scott Ullrich [EMAIL PROTECTED] wrote:
Run a update_file.sh /etc/crontab then reboot your machine.Weremoved the periodic scripts.Scott
From the periodic scripts that you listed from crontab.
On 12/19/05, Szasz Revai Endre [EMAIL PROTECTED] wrote:
Oh thanks, I totally forgot about that..
I was doing:
# crontab -l
crontab: no crontab for root
:)
Still where does the `find` come from?
On 12/19/05, Rainer Duffner [EMAIL
On 12/19/05, alan walters [EMAIL PROTECTED] wrote:
Yep.
This is confirmed to work.
Okay, I'll make the change.
I was looking at the pppoe configuration in a bit more detail as well.
I configured with a subnet of /25 yet pppoe only seems to make 15
configurations in the mpd.conf. the man
On Mon, 19 Dec 2005 12:21:49 -0500
Scott Ullrich [EMAIL PROTECTED] wrote:
On 12/19/05, Jure Pečar [EMAIL PROTECTED] wrote:
Because I didn't check if there's something going on on serial ...
Yes. It disabled VGA. Doesn't it say this on the webgui?
It does. I just didn't expect this to
On 12/19/05, Jure Pečar [EMAIL PROTECTED] wrote:
Is there a list of altq supported nics? Google is not too helpful here.
an ath awi bfe bge dc de ed
em fxp hme lnc ndis rl sf sis sk
tun vr wi xl vlan ste
On Mon, 19 Dec 2005 11:45:57 -0500
Scott Ullrich [EMAIL PROTECTED] wrote:
I have the same problem with PR440FX. Install pfSense on a different
machine then move the hard drive.
Interesting, that did the trick. Thanks.
--
Jure Pečar
http://jure.pecar.org/
On 12/19/05, Jure Pečar [EMAIL PROTECTED] wrote:
Interesting, that did the trick. Thanks.
It's a shame that its not easier as the PR440FX's have proved to be
quite the workhorses and they work great w/ pfSense.
Yes, keyboard and serial is disabled. all output appears at com1 9600 baud.
And no, it's not nic independent. the driver has to support it. the ep-driver
doesn't do afaik. check this for more details:
http://forum.pfsense.org/index.php?topic=16.0
Holger
-Ursprüngliche Nachricht-
Von:
On Dec 18, 2005, at 6:34 AM, alan walters wrote:I found that in the mobile clients section that I needed to change my identifier to a fqdn. Where before it was an ip.I have never gotten mobile clients to work using IP as identifier. I'm surprised it worked for you before.
Title: Ipsec issues update
What version are you running that works
for you?
Thanks
John
From: alan walters
[mailto:[EMAIL PROTECTED]
Sent: Sunday, December 18, 2005
6:35 AM
To: support@pfsense.com
Subject: [pfSense Support] Ipsec
issues update
Well
I have got all my
Title: Ipsec issues update
0.96.4 but it took some fiddling.
From: John Cianfarani
[mailto:[EMAIL PROTECTED]
Sent: Monday, December 19, 2005
7:18 PM
To: support@pfsense.com
Subject: RE: [pfSense Support]
Ipsec issues update
What version are you running that works
for you?
http://www.freebsd.org/cgi/man.cgi?query=altqapropos=0sektion=0manpath=FreeBSD+6.0-RELEASE+and+Portsformat=html
-Original Message-
From: Jure Pečar [mailto:[EMAIL PROTECTED]
Sent: Monday, December 19, 2005 11:47 AM
To: support@pfsense.com
Subject: Re: [pfSense Support] two problems
On
Now I have a clean pfSense running, I want to add some rules. Right now I
don't have yet the wan interface up running (it's set to pppoe), only
lan. I want to add port forward to my soon-to-be internal web server (which
is currently on the box that does pppoe):
ext interface wan
ext addr if
Turn off Reflection in System - Advanced.
On 12/19/05, Jure Pečar [EMAIL PROTECTED] wrote:
Now I have a clean pfSense running, I want to add some rules. Right now I
don't have yet the wan interface up running (it's set to pppoe), only
lan. I want to add port forward to my soon-to-be internal
Rather than wait for a release, I thought I would try patching the file
to 1.575.2.47. The blocking rule appeared to work, now there a pass
rule is freaking out. I dropped filter.inc back to v1.575.2.43.
===
php: : There were error(s) loading the rules: /tmp/rules.debug:181:
syntax
On 12/19/05, Ted Crow [EMAIL PROTECTED] wrote:
Rather than wait for a release, I thought I would try patching the file
to 1.575.2.47. The blocking rule appeared to work, now there a pass
rule is freaking out. I dropped filter.inc back to v1.575.2.43.
===
php: : There were
Looks like we're cooking now! All rules configured correctly using
filter.inc v1.575.2.48.
Thanks Scott!
Ted Crow
MCP/W2K
Information Technology Manager
Tuttle Services, Inc.
(419) 228-6262 x 247
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Monday, December
Hello all, I just upgraded to 0.96.4 and I now notice the new freeBSD
menu. I'm wondering what file or how I edit it to make the startup menu
prompt shorter. Instead of 10, I would like to turn it down to 1-2 seconds.
Also, I have noticed that I used to have startup/shutdown beeps, now
these
26 matches
Mail list logo
