Ah, right. I messed up the outbound NAT.
Thanks Holger.
sai
On 5/9/06, Holger Bauer [EMAIL PROTECTED] wrote:
You have to use advanced outbound NAT and the tutorial covers this. Otherwise
your connections from your node one will be natted to the REAL IP of the
interface, not the CARP VIP.
Hi Paul.
I use pfSense on a PC-Engines WRAP with 3 nics. Works great.
http://www.pcengines.ch/wrap.htm
you didn't supply requirements so I dont know if this is sufficient.
Regards,
Marc
Von: Paul Haddad [mailto:[EMAIL PROTECTED]
Gesendet: Di 02.05.2006
Hi!I'm try to configure a load balance in pfsense BETA3, but .. although i have read some pdf documents in the tutorials secction, this documents are ... too much specific for the examples, no explain what is the meaning of each section and variable and i don't know if i have a configuration
Hi,
I havent seen or heard of anyone
getting a Rare Thins, unless someone has posted this error
message in the forums at some point.
I experience regularly OPT and WAN
Interfaces attempting to sync but does not sync until I reset the ADSL routers
a couple of times to get them
I run pfsense on a wrap platform. I'm aware of the differences in the image
(R/O CF mount, no packages, etc).
I'd like to replace my CF card with a 1GB (or larger) microdrive, and
enable R/W and packages.
This has been discussed many times, and it's well documented in the
archives how to
Marc,
On 5/10/06, Marc Eggenberger [EMAIL PROTECTED] wrote:
Hi Paul.
I use pfSense on a PC-Engines WRAP with 3 nics. Works great.
http://www.pcengines.ch/wrap.htm
you didn't supply requirements so I dont know if this is sufficient.
I want a mini-itx solution because I wanted something small
On May 10, 2006, at 1:48 PM, Paul Haddad wrote:
2k+ connections and 15Mbps down at the same time.
these boxes have been clocked at 30Mbps and have 128MB of RAM, so
should be able to handle that many connection states.
smime.p7s
Description: S/MIME cryptographic signature
Vivek Khera wrote:
On May 10, 2006, at 1:48 PM, Paul Haddad wrote:
2k+ connections and 15Mbps down at the same time.
these boxes have been clocked at 30Mbps and have 128MB of RAM, so
should be able to handle that many connection states.
I think the rule-of-thumb was 1K RAM per
Vivek,
On 5/10/06, Rainer Duffner [EMAIL PROTECTED] wrote:
Vivek Khera wrote:
On May 10, 2006, at 1:48 PM, Paul Haddad wrote:
2k+ connections and 15Mbps down at the same time.
these boxes have been clocked at 30Mbps and have 128MB of RAM, so
should be able to handle that many connection
Paul Haddad wrote:
Vivek,
On 5/10/06, Rainer Duffner [EMAIL PROTECTED] wrote:
Vivek Khera wrote:
On May 10, 2006, at 1:48 PM, Paul Haddad wrote:
2k+ connections and 15Mbps down at the same time.
these boxes have been clocked at 30Mbps and have 128MB of RAM, so
should be able to handle
On 5/10/06, Rainer Duffner [EMAIL PROTECTED] wrote:
What hardware is inside the dlink?
You should compare apples to apples.
And I don't think the dlink runs pf as a packet-filter...
I'm actually not comparing the device to the WRAP box so much as
showing an example where increasing the number
[EMAIL PROTECTED] wrote on Wed, May 10 2006:
I'd like to replace my CF card with a 1GB (or larger) microdrive, and
enable R/W and packages.
Same here. I also like to take advantage of the PC functionality
with my Soekris net4801.
Are there other places that I'd need to patch up? Any other
Hi,
Although regularly a m0n0wall user, I use some VIA EPIA PD-6000 FW / GW
systems with pfsense. It runs great. I did install to both 1G CF and
regular HDD, and am very happy with it. Currently the CF version has
been up for the last three months and doing great.
1 WAN 1 Mbit / 1 VoIP link
Does the serial port console functionality of pfSense work on the
standard PC platform or is this an embedded platform only (i.e.
wrap/soekris) feature? I tried with a null modem cable and couldn't get
it to work...
~Brian
-
To
At 12:36 PM 5/10/2006, Frederick Page wrote:
[EMAIL PROTECTED] wrote on Wed, May 10 2006:
I'd like to replace my CF card with a 1GB (or larger) microdrive, and
enable R/W and packages.
Same here. I also like to take advantage of the PC functionality
with my Soekris net4801.
My understanding
On May 10, 2006, at 4:26 PM, Brian Neufeld wrote:
Does the serial port console functionality of pfSense work on the
standard PC platform or is this an embedded platform only (i.e.
wrap/soekris) feature? I tried with a null modem cable and
couldn't get
it to work...
did you enable the
Sorry I was not more clear... What I wanted to know is if it is even
possible on the PC platform? I don't want to bang my head against a
wall trying to get something to work that never will...
~Brian
-Original Message-
From: Vivek Khera [mailto:[EMAIL PROTECTED]
Sent: Wednesday,
On May 10, 2006, at 4:56 PM, Brian Neufeld wrote:
Sorry I was not more clear... What I wanted to know is if it is even
possible on the PC platform? I don't want to bang my head against a
wall trying to get something to work that never will...
yes it is. did you do what I stated
systemadvanced, [x] enable serial console at com1
Holger
-Original Message-
From: Brian Neufeld [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 10, 2006 10:57 PM
To: support@pfsense.com
Subject: RE: [pfSense Support] Serial console on PC?
Sorry I was not more clear... What I
Update /etc/platform to read pfSense instead of embedded I believe.
--Bill
On 5/10/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I run pfsense on a wrap platform. I'm aware of the differences in the image
(R/O CF mount, no packages, etc).
I'd like to replace my CF card with a 1GB (or larger)
I'll probably do some testing with my CF setup and if it works, go buy the
microdrive.
Thanks, I appreciate it!
At 03:17 PM 5/10/2006, Bill Marquette wrote:
Update /etc/platform to read pfSense instead of embedded I believe.
--Bill
On 5/10/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I
At 12:36 PM 5/10/2006, Frederick Page wrote:
Same here. I also like to take advantage of the PC functionality
with my Soekris net4801.
I think I might follow the suggestions on this page:
http://www.gizmolabs.org/~ecronin/w/Main/PfSenseFullWRAP
Rather than hack an embedded image to give me
Confirmed. Once I moved my backup XML file to a:\conf\config.xml (i.e.
creating the conf folder and renaming the file to simply
config.xml), I could boot the CD (beta4 currently) and it would
restore that config as well as use it to store changes done from the web
GUI. Thanks for the insight!
23 matches
Mail list logo