I hope squid gets fixed soon. I like its functionality.
Tim
Kelvin Chiang wrote:
Yes, I already did :)
Regards,
Kelvin
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 16, 2006 11:51 PM
To: support@pfsense.com
Subject: Re: [pfSense Sup
Hi Tim,
I don't more than 2 network interface is the root cause to this issue, I had
only 2 network interface. Same to me that the web GUI is still accessible. I
also realized that the boot continues if I go to Status/Services and click
on the stop or start button. Strange, I think there is multi
Well, a few days and a couple of installs later, I have a successful
configuration, but I am having an issue with my iptables setup.
As I am new to the routing scene, I wondered if there was someone who would
be able to help point me in the right directions.
I have a LAN router setup running Cent
Yes, I already did :)
Regards,
Kelvin
-Original Message-
From: Scott Ullrich [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 16, 2006 11:51 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] proxy_monitor.sh
Seems to be a known bug. I am going to disable the package. Deinst
Please search http://forum.pfsense.com . FTP has been discussed in detail there
already. Your question is answered there somewhere ;-)
However, very short howto (if that doesn't help search the forum):
- Delete everything that you created for ftp as it doesn't work atm
- at Interfaces>WAN enable
On 11/16/06, Holger Bauer <[EMAIL PROTECTED]> wrote:
Output of embedded installs is at com1 only after it started to boot.
Connect your com1 and access it with a serial terminal.
Holger
> -Original Message-
> From: Tim Martin [mailto:[EMAIL PROTECTED]
> Sent: Friday, November 17, 2006 1
There is no problem with double-natting at WAN2. It will work just
fine. I'm doing this all the time when simulating something inside my
lan with a test-pfSense. I also used such a setup at our office with a
netgear modemrouter at OPT1 before we switched our second line to static
Ips too.
Just se
On 11/16/06, Tim Martin <[EMAIL PROTECTED]> wrote:
How much RAM do you have?
PlanAlpha wrote:
> I had the same problem and tried every trick I could think of to make
> it work. m0n0wall works fine on the same system and I even tried
> copying it's mbr, installed gag, etc... but to no avail. Leav
Output of embedded installs is at com1 only after it started to boot.
Connect your com1 and access it with a serial terminal.
Holger
> -Original Message-
> From: Tim Martin [mailto:[EMAIL PROTECTED]
> Sent: Friday, November 17, 2006 12:25 AM
> To: support@pfsense.com
> Subject: Re: [pfS
How much RAM do you have?
PlanAlpha wrote:
I had the same problem and tried every trick I could think of to make
it work. m0n0wall works fine on the same system and I even tried
copying it's mbr, installed gag, etc... but to no avail. Leaving it
alone for a while had no effect. I left it there b
I had the same problem and tried every trick I could think of to make
it work. m0n0wall works fine on the same system and I even tried
copying it's mbr, installed gag, etc... but to no avail. Leaving it
alone for a while had no effect. I left it there beeping for hours and
it never booted. I tried
I get the same thing after installing pfSense to the hard drive. I
just wait a while and the computer beeps and then boots up. I would
like to know how to get rid of that though, so the computer will boot
up faster.
Tim
Alvaro Pietrobono wrote:
Hi,
I'm trying to install pfsense 1.0.1 on
Hi, all.
I´m trying to connect in a FTP server berind of the pfSense.
Its works fine until the user try to do a LIST command, like ls or dir,
on FTP server.
Reading many docs about FTP Helper, enabling or disabling this on
Interfaces WAN/DMZ/LAN in any possibility this wasnt work...
Using a
I had the same problem. The Webconfigurator was still accessible and I
was able to uninstall the squid package. I have 3 interfaces, WAN,
LAN, and OPT1. I wonder if that was the cause of the problem. I was
also using Captive Portal and Load Balancer on OPT1. The captive
portal was using th
Hi,
i wanted to do the following scenario with pfSense.
On my LAN there are several subnets with public ip addresses.
Now i want to loadbalance the outgoing traffic with 2 WAN connections
WAN1 = Gateway with Public-IP-Address (directly Internet)
WAN2 (Opt1) = DSL Connection (GW 192.168.2.1 (op
Hello!
Something is wrong for european time zones. My time zone is [Europe/Madrid]
and NTP server time.nist.gov.
My FreeBSD 4.5, 4.10 and 6.1 servers are ok with official time in Spain, but
pfSense has one hour more. I think there is a problem with "Daylight Saving
Time".
Thanks,
Josep Pujad
This is by design.
Scott
On 11/16/06, Josep Pujadas i Jubany <[EMAIL PROTECTED]> wrote:
Hello!
Changing the name of the admin user at the web interface does'nt change it
for the SSH access.
I don't know if this is "by design" or is a bug.
Best regards,
Josep Pujadas
--
Hello!
Changing the name of the admin user at the web interface does'nt change it
for the SSH access.
I don't know if this is "by design" or is a bug.
Best regards,
Josep Pujadas
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
Fo
Hi,
I'm trying to install pfsense 1.0.1 on 512Mb
Disk on Module devices but unseccessfully.
On reboot (after installation has finish) it
stops in bootloader displaying "F1" and sounds
a beep tapping any key of keyboard.
Any ideas?
thanx
~Alvaro
((( Internet Email Confidentialit
Seems to be a known bug. I am going to disable the package. Deinstall it.
Scott
On 11/16/06, Kelvin Chiang <[EMAIL PROTECTED]> wrote:
Hi, after I installed the squid, the system has problem to complete the
bootup. The screen freezed at "Stopping
/usr/local/etc/rc.d/proxy_monitor.sh". Did an
Some more about my last question ...
I manually entered the DNS servers at the client machine (Windows XP Pro) and
now it works.
The problem its when Windows it looks for the pfSense interface as DNS Server
(when DHCP should configure de DNS settings). In this case [ipconfig /all] at
the Windo
Hello!
I have my pfSense with the following interfaces:
LAN 192.168.201.0/24
WAN 192.168.1.0/29
WAN1 (OPT1) 192.168.2.0/30
WAN2 (OPT2) 192.168.3.0/30
LAN1 (OPT3) 192.168.202.0/24
LAN2 (OPT4) 192.168.203.0/24
I have static addresses for all pfSense interfaces. I have DHCP for LA
Holger,
Yes, they are external SOHO accesspoints.
I will try if they support VLANs ...
Many thanks,
Josep Pujadas
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
These are external accesspoints? Not pfSense systems? If that's the case
it depends on the AP. Some better Aps can be configured with VLANs for
example where you can configure one of the VLANs as management VLAN.
Access to the AP then is only possible on this VLAN. You can assign a
different VLAN t
Hello!
I have pfSense running with 3 LAN & 3 WAN.
One of the LANs has 10 wireless Access Point. Is there any method to hide the
Access Point to the wireless clients? All the Access Point are configurable
using http with user & password validation. It seems sure, but I don't
like ...
We use a
Hi, after I installed the squid, the system has problem to complete the
bootup. The screen freezed at "Stopping
/usr/local/etc/rc.d/proxy_monitor.sh". Did anyone experience this problem?
Can anyone help?
Regards,
Kelvin
26 matches
Mail list logo
