-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Wade,
I'm not using static routes, just allowing the HQ's pfSense to forward
all traffic on the IPSec interfaces... Meshing would be too complex due
to dynamic IPs at each branch.
Tim
Wade Blackwell schrieb:
> Good morning Tim,
> So to be c
Right,
That is what I figured, someone had mentioned that as an option and it
didn't sound like that was the direction you were going. Thanks for that
let me throw some cycles at this today and get back with you.
-W
-
Wade Blackwell
"Integrity is often more painful and always mo
Just for managment,
I wasn't able to ping from mgt int on ap to PF vlan int IP.
-W
-
Wade Blackwell
"Integrity is often more painful and always more profitable than
perception management"
On Tue, 2007-12-18 at 21:03 -0700, RB wrote:
> What do you mean you can't pass traffic?
Thanks,
I will try these both today and see what love can be had.
-W
-
Wade Blackwell
"Integrity is often more painful and always more profitable than
perception management"
On Tue, 2007-12-18 at 22:26 -0600, Curtis LaMasters wrote:
> If you have the ability to tag on all VLAN
Scott Ullrich wrote:
> On Nov 22, 2007 5:29 AM, Paul M <[EMAIL PROTECTED]> wrote:
>> is there a port of haproxy (or equivalent) to run on pfsense, and if so
>> does it work reliably?
...
>> we previously used pound as a load balancer and it works well, but we
...
> On my TODO list is to convert us
On Dec 19, 2007 11:12 AM, Paul M <[EMAIL PROTECTED]> wrote:
> Hi,
> now pfsense 1.2 full release is hopefully pretty much ready to roll, I
> was hoping I could place my vote on this as a really good feature to add
> for 1.3-rc1! I think it would add a valuable feature to pfsense future
> versions.
Christopher Iarocci wrote:
Is there no way to default it to the serial console before putting the hard
drive in the 5501 except this procedure? This means I have to have a piece of
hardware with VGA, keyboard and 2 NIC cards that also will connect a SATA II
drive. I don't have that sort of h
-Original Message-
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 19, 2007 1:24 PM
To: support@pfsense.com
Subject: Re: [pfSense Support] Setting up on Soekris NET5501-70 with all
features
Christopher Iarocci wrote:
> Is there no way to default it to the seria
the full install image is an ISO, meaning CD based install.
the embedded install image has a disk image for putting it on compact flash,
but that wont let you install any packages once up and running.
-Sean
> From: [EMAIL PROTECTED]> To: support@pfsense.com> Date: Wed, 19 Dec 2007
> 14:09:22
> the embedded install image has a disk image for putting it on compact flash,
> but
> that wont let you install any packages once up and running.
Perhaps the answer might be to modify that behaviour so that packages can be
installed onto systems built using the embedded images? Surely that'd re
Sean,
Will the ISO allow me to install to a hard drive hung off a machine by a USB
adapter, or will it only work if the hard drive is connected to the
motherboard? I imagine I have to boot a machine off the CD created by the
ISO and that will run me through an install to hard drive.
Chris
Embedded images running on compact flash are not designed for the kinds of page
writes that would be involved with most packages.
This is to make the system as stable as possible.
Once SSD becomes a standard I'm sure they'll take a look at that, but for now -
the stability wouldn't be there.
As
Tim,
I'm not thinking it's difficult. I'm used to m0n0wall where you must have 2
interfaces. Also, the drive I am using is a SATA drive. The only machine I
have with a SATA interface is a laptop. Could I use a laptop to set this up
with a single interface? If the answer is yes, then I can
Or, make an image for the full version that is an image, not an iso, that also
have the serial port enabled. This way it could be written to a hard drive
bound for an embedded machine and just plopped in place with no fancy work
arounds.
-Original Message-
From: Chris Bagnall [mailto:[
Yes that would be fine.
All you need is to setup the LAN with an IP so you can get in and turn on the
console.
Then when you pull it up via serial on the new device choose assign interfaces
and set it up with the new interfaces.
Btw... "- and it isn't as difficult as you seem to be thinking it is
Tim,
I appreciate the help. I didn't think you were bashing.
Anyway, I ran the liveCD on my laptop, and as I suspected it complains that I
do not have 2 working interfaces and will not go any further (it also doesn't
recognize my NIC card in the machine). So, I'm stuck needing an image with t
It's been about 6 months since I did it last... but did you try and add vlans
for the WAN?
-Original Message-
From: Christopher Iarocci [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 19, 2007 4:57 PM
To: support@pfsense.com
Subject: RE: [pfSense Support] Setting up on Soekris NET550
Christopher Iarocci wrote:
Or, make an image for the full version that is an image, not an iso, that also
have the serial port enabled. This way it could be written to a hard drive
bound for an embedded machine and just plopped in place with no fancy work
arounds.
We can't provide an image
Christopher Iarocci wrote:
Sean,
Will the ISO allow me to install to a hard drive hung off a machine by
a USB adapter, or will it only work if the hard drive is connected to
the motherboard? I imagine I have to boot a machine off the CD
created by the ISO and that will run me through an
19 matches
Mail list logo
