Here is my expierence with wake on lan. The bios and the operating
system have to be configured to put the nic into the proper state upon
shutdown sucht hat can be awaken by a wol packet. In windows u need
to modify the nic in device manager and enable this feature. If the pc
looses total power,
Also if ur nic is a pci or pcie nic the wol cable must be connected to
the motherboard header for it to work with wol.
Chris
On Dec 12, 2009, at 1:21 AM, Tortise tort...@paradise.net.nz wrote:
- Original Message - From: Chris Buechler cbuech...@gmail.com
To: support@pfsense.com
On Fri, 11 Dec 2009 19:41:32 +0100
Seth Mos seth@xs4all.nl wrote:
Chris Buechler schreef:
On Fri, Dec 11, 2009 at 11:27 AM, Eugen Leitl eu...@leitl.org wrote:
On Fri, Dec 11, 2009 at 09:31:38AM -0600, J.D. Bronson wrote:
I just did the upgrade via the web GUI..
it went down w/o a
On Fri, Dec 11, 2009 at 7:26 PM, Evgeny Yurchenko evg.yu...@rogers.com wrote:
I know it is cosmetic but it is easy to fix, please do it.
1) Status has two OpenBGPD Routing sections, one of them should be renamed
to Forwarding as it shows fib not rib.
2) OpenBGPD IP section returns error
I noticed this when I 1st started using pfSense at 1.2.3-RC, so I am not
sure if its a new issue or not.
Using the web interface:
Status...then system logs then system..and then press CLEAR LOG
clears the screen but nothing is ever there when I log back in again
later on. As long as you dont
On Sat, Dec 12, 2009 at 4:44 PM, J.D. Bronson jd_bron...@sbcglobal.net wrote:
I noticed this when I 1st started using pfSense at 1.2.3-RC, so I am not
sure if its a new issue or not.
Using the web interface:
Status...then system logs then system..and then press CLEAR LOG
clears the screen
well my ISP DHCP lease is only 10mins, even though it never has changed
in 2yrs...
and as such, there is 'noise' on the system log indicating the renew
every 10mins...piles of them.
Once I clear the system log, I never see these again..
--
J.D. Bronson
Information Technology
Aurora Health
On Sat, Dec 12, 2009 at 6:40 PM, J.D. Bronson jd_bron...@sbcglobal.net wrote:
well my ISP DHCP lease is only 10mins, even though it never has changed in
2yrs...
and as such, there is 'noise' on the system log indicating the renew
every 10mins...piles of them.
Once I clear the system log, I
On 12/12/09 6:09 PM, Chris Buechler wrote:
I just tried 3 different boxes and they all continue to log just fine.
Including when kicking off dhclient. Try to edit and save a firewall
rule and apply changes, that will log the filter reload.
Ok at 18:14 I edited a rule..saved it and then applied
On Sat, Dec 12, 2009 at 7:19 PM, J.D. Bronson jd_bron...@sbcglobal.net wrote:
On 12/12/09 6:09 PM, Chris Buechler wrote:
I just tried 3 different boxes and they all continue to log just fine.
Including when kicking off dhclient. Try to edit and save a firewall
rule and apply changes, that
On 12/12/09 6:21 PM, Chris Buechler wrote:
but nothing more. Not even the dhclient messages. My install is straight
forward and I didnt edit/hack anything. What am I missing?
I suspect it's doing as intended, your DHCP lease may be longer than
you think, or than it previously was. Logging
The external IP of the radius server has to be added to the radius servers
client list or else it will reject authentication requests.
Mike
From: Tancinco, Jon
Sent: Wednesday, December 09, 2009 5:43 PM
To: support@pfsense.com
Subject: RE: [pfSense Support] Captive Portal RADIUS
Just stumbled over this:
MSI Industrial WindBOXII
http://www.logicsupply.com/products/ms_9a25
Not cheap - but it's got everything in a nice pre-packaged box.
Regards,
-Jeppe
-
To unsubscribe, e-mail:
13 matches
Mail list logo