Re: [pfSense Support] boot failure on alix with pfSense 1.2.3-RC3 (or more recent snapshots)

Hans Maes schrieb: Hello, Is anybody running pfSense on an alix1c, alix1d or alix3c3 ? (the types with 1 NIC and VGA/USB) I've been using pfSense on these types of alix boards for a while now, in setups with VLANs on the onboard NIC or a wireless card in the mpci slot as a second NIC.

Re: [pfSense Support] syslog-ng config to record events from fws

luismi schrieb: Hi all, Can anyone forward me a template to configure syslog-ng for pfsense logs? Thanks - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail:

Re: [pfSense Support] No IP over DHCP

/ Best Regards Nathan Eisenberg Sr. Systems Administrator Atlas Networks, LLC supp...@atlasnetworks.us http://support.atlasnetworks.us/portal -Original Message- From: Michael Schmitt [mailto:stiff...@linuxnoob.net] Sent: Saturday, April 25, 2009 11:26 AM To: support@pfsense.com

[pfSense Support] No IP over DHCP

Hello List, I try the new 1.2.3-RC1-Embedded release on an ALix board. WAN -- sis0, dhcp LAN -- sis1, 10.0.0.1/24 WLAN -- ath0 bridged with LAN (atheros 5212 chipset) dhcp-server is enabled for LAN. the first firewallrules on the LAN and WLAN interfaces are UDP * 67-68*67/68 The

Re: [pfSense Support] Very weak wireless signal using an atheros chipset

Markus Golser schrieb: Hi, I'm using pfsense 1.2.2 embedded on an PC Engines ALIX.2C2 board. My Wireless device is a Compex WLM54G23 200mW (miniPCI) card. ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:80:48:55:99:65 inet6

[pfSense Support] In/Out errors on WLAN interface

Hello list, My pfsense box is a ALIX 2d3 Board. version pfsense is 1.2.2 My porblem is, that i have a lot of in/out errors on the Wlan interface. I tried all combinations of rxantenna, txantenna and diversity. But it is not getting better. Another thing is, when i set txantenna=0, rxantenna=1

Re: [pfSense Support] Re: Wireless, DHCP and Bridging

hello list, i have the same problem with pfsense box. Version 1.2.2 WAN: vr2, dhcp LAN: vr0-- 10.0.0.1 OPT1: ath0 -- no ip, bridged with LAN. everything is working fine. Just when i want to connect to my wireless network, i get no ip. The same configuration works fine with my 1.2 box.

Re: [pfSense Support] Re: Wireless, DHCP and Bridging

sorry i forgot to say that the dhcp-server is activated for the lan interface Michael Schmitt schrieb: hello list, i have the same problem with pfsense box. Version 1.2.2 WAN: vr2, dhcp LAN: vr0-- 10.0.0.1 OPT1: ath0 -- no ip, bridged with LAN. everything is working fine. Just when i

Re: [pfSense Support] Re: Wireless, DHCP and Bridging

thanks a lot Chris, ist working fine now. Chris Buechler schrieb: On Sun, Mar 8, 2009 at 5:16 PM, Michael Schmitt stiff...@linuxnoob.net wrote: hello list, i have the same problem with pfsense box. Version 1.2.2 WAN: vr2, dhcp LAN: vr0-- 10.0.0.1 OPT1: ath0 -- no ip, bridged