You'll need to setup a NAT Port Forward rule that looks like this:
If Proto Ext Port Range NAT IP Int. Port Range Description
LAN TCP 25 (SMTP) mailserver IP mailserver PORT Redirect SMTP traffic to
mail server
The problem is this. Your mail server *also* resides on the LAN interface.
After
On Mon, Feb 9, 2009 at 3:14 PM, Joel Robison robisonj...@gmail.com wrote:
Hello All,
I was wondering if anyone here would be able to give me some pointers in
context of traffic redirection. What I am attempting (and failing at I
should add) to do is redirect all SMTP traffic from the LAN to
On Mon, Feb 9, 2009 at 5:43 PM, Tim Nelson tnel...@rockbochs.com wrote:
- Bill Marquette bill.marque...@gmail.com wrote:
The MTA needs to not be on the same network as you are redirecting.
ie. You can't send LAN traffic back to LAN, it MUST go to a
different
interface (say a DMZ).
I have done a little experimenting with this over the past few hours (while
dodging IT requests, I am sure most of you are familiar). I setup a VLAN
interface that is off of the LAN interface to put the email server in a DMZ.
I then created a rule that will look for my workstation as a source IP
On Mon, Feb 9, 2009 at 5:11 PM, Chris Buechler c...@pfsense.org wrote:
On Mon, Feb 9, 2009 at 5:43 PM, Tim Nelson tnel...@rockbochs.com wrote:
- Bill Marquette bill.marque...@gmail.com wrote:
The MTA needs to not be on the same network as you are redirecting.
ie. You can't send LAN
On Mon, Feb 9, 2009 at 5:30 PM, Joel Robison robisonj...@gmail.com wrote:
I have done a little experimenting with this over the past few hours (while
dodging IT requests, I am sure most of you are familiar). I setup a VLAN
interface that is off of the LAN interface to put the email server in a