-
From: "Vivek Khera" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, May 13, 2008 2:47 AM
Subject: Re: [pfSense Support] setting time
You likely have faulty hardware.
-
To unsubscribe, e-mail: [EMAIL PROTECTED
On May 10, 2008, at 4:13 PM, Chris Buechler wrote:
3) ACPI issues - try disabling ACPI, sometimes it causes time
keeping issues.
You can also selectively disable the ACPI timer device without turning
ACPI off entirely. Add the following to your /boot/loader.conf file:
debug.acpi.disabl
On May 10, 2008, at 11:16 AM, Dean Larson wrote:
computer kept near perfect time before under different o/s. this
seems real strange.
A long long time ago, in a galaxy far far away, I had a box that ran
100% fine with linux under load. under FreeBSD and BSD/OS it would
lock up randomly
29:39 +1200
> From: [EMAIL PROTECTED]
> To: support@pfsense.com
> Subject: Re: [pfSense Support] setting time
>
> Dean, have you checked the motherboard battery? (I think in theory this
> should only be relevant on powering off, but I wouldn't be
> sure
On Sun, May 11, 2008 at 12:19 AM, Dean Larson <[EMAIL PROTECTED]> wrote:
>
> i did ysctl -w kern.timecounter.hardware=i8254 and after 33 minutes i was off
> .04 seconds. better than 250 seconds.:)
>
Good to know! Thanks for reporting back.
--
Dean, have you checked the motherboard battery? (I think in theory this should
only be relevant on powering off, but I wouldn't be
sure in practice)
Kind regards
David Hingston
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
Fo
upport@pfsense.com
> Date: Sat, 10 May 2008 19:55:03 -0700
> Subject: Re: [pfSense Support] setting time
>
> Hi Dean,
>
> You can see what FreeBSD (pfSense) is using to keep time with the
> following command:
>
> firewall:~# sysctl kern.timecounter.hardware
> kern.ti
a
msi computer with 350 processor.
thank you for all your help.
dean
Date: Sat, 10 May 2008 16:13:11 -0400
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
On Sat, May 10, 2008 at 11:16 AM, Dean Larson wrote:
i have a cron job of 15 * * *
t; To: support@pfsense.com
> Subject: Re: [pfSense Support] setting time
>
> On Sat, May 10, 2008 at 11:16 AM, Dean Larson wrote:
>>
>> i have a cron job of 15 * * * * /usr/sbin/ntpdate -u -s tick.usno.navy.mil
>>
>> i did the command you said ntpdate pool.ntp.org. and yes
On Sat, May 10, 2008 at 11:16 AM, Dean Larson <[EMAIL PROTECTED]> wrote:
>
> i have a cron job of 15 * * * * /usr/sbin/ntpdate -u -s tick.usno.navy.mil
>
> i did the command you said ntpdate pool.ntp.org. and yes it sets the time,
> but it doesn't stay. for long.
>
> computer kept near perfect t
> Date: Sat, 10 May 2008 11:53:10 -0500
> From: [EMAIL PROTECTED]
> To: support@pfsense.com
> Subject: Re: [pfSense Support] setting time
>
> I have seen some older systems have an issue between the hardware clock being
> set to UTC or Localtime
thank you. i did that, and removed the cron job. i forgot about that being in
the gui. :)
> From: [EMAIL PROTECTED]
> To: support@pfsense.com
> Date: Sat, 10 May 2008 09:28:04 -0700
> Subject: Re: [pfSense Support] setting time
>
>
i'll verify the clock on the hardware to verify they are both on the same page.
:)
> Date: Sat, 10 May 2008 11:53:10 -0500
> From: [EMAIL PROTECTED]
> To: support@pfsense.com
> Subject: Re: [pfSense Support] setting time
>
> I have
I have seen some older systems have an issue between the hardware clock
being set to UTC or Localtime and the OS showing a completely different
time. May want to recheck your BIOS Date/Time.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
2008 10:12:32 -0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
Have you run:
ntpdate pool.ntp.org
from the command line?
Dean Larson wrote:
right now it is running about 10 minutes fast. i set it to
chicago about 30 minutes ago... and time still
range.
> Date: Sat, 10 May 2008 10:12:32 -0500
> From: [EMAIL PROTECTED]
> To: support@pfsense.com
> Subject: Re: [pfSense Support] setting time
>
> Have you run:
>
> ntpdate pool.ntp.org
>
> from the command line?
>
> Dean Larson wrote:
&g
-0500
From: [EMAIL PROTECTED]
To: support@pfsense.com
Subject: Re: [pfSense Support] setting time
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetwork
ect: Re: [pfSense Support] setting time
>
> What timezone are you in? If CST try Chicago instead of GMT -6.
>
> --
> Curtis LaMasters
> http://www.curtis-lamasters.com
> http://www.builtnetworks.com
_
With Windows Live
Curtis LaMasters wrote:
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
Yeah, for those of you who don't know. The GMT settings for FreeBSD and
other OSsen are completely wrong. If you're trying
What timezone are you in? If CST try Chicago instead of GMT -6.
--
Curtis LaMasters
http://www.curtis-lamasters.com
http://www.builtnetworks.com
how do you set the time on pfsense? i have checked the openntpd and still the
time is wrong. i have written a cron job to set the clock and it doesn't
appear to change the clock. it seems to gain time about 15 minutes in 12 hours.
what am i doing wrong? how can i fix this?
thank you
dean
21 matches
Mail list logo
