Hi everyone,
I've compiled all your input, here is the output:
The cables are all cat5e, which should be OK. But to be sure I've managed to
find a cat6 cable, but as expected, it did not change anything. So the cables
are not the problem.
Then I added speed 1000 and duplex full to the two
, Apr 5, 2012 16:21:26 GMT+02:00
Subject: Re: [swinog] EtherChannel - Long Time between LINK-3-UPDOWN and
LINEPROTO-5-UPDOWN
Hi everyone,
I've compiled all your input, here is the output:
The cables are all cat5e, which should be OK. But to be sure I've managed to
find a cat6 cable
Hi,
Tobias:
Why is pxe enabled? Is this device having its IOS image downloaded from a
tftp server every time it boots up? That would account for the latency...
PXE is enabled on the server, not on the switch =)
Tobias
--
Nine Internet Solutions AG, Albisriederstr. 243a, CH-8047 Zuerich
Hi Tobias
It may be a stupid question, but have you tried opening a SR with Cisco TAC ? :)
Cheers!
On 5 Apr 2012, at 17:41, Tobias Brunner wrote:
Hi,
Tobias:
Why is pxe enabled? Is this device having its IOS image downloaded from a
tftp server every time it boots up? That would account
Hi Tobias
Here are perhaps some hints...
-channel-group NUMBER mode on: Is a static channel with NO channel
protocol on it. If you speak LACP on the other side the channel won't
come up because the neighbors don't agree to a channel. You need a
channel-group NUMBER mode active on the switch
To: swinog@lists.swinog.ch
Subject: Re: [swinog] EtherChannel - Long Time between LINK-3-UPDOWN and
LINEPROTO-5-UPDOWN
Hi all, Thanks for the input so far. I've merged all the input of you (and the
trunk/vlan configuration I need to use) and this is how the configuration looks
right now
@lists.swinog.ch
Objet : Re: [swinog] EtherChannel - Long Time between LINK-3-UPDOWN and
LINEPROTO-5-UPDOWN
Be aware of the port-channeling protocol you use ( LACP or PAGP )
Channel-group 1 mode active - LACP
There are timers involved to get the port-channel up.
If you are sure about which
Hi there,
Maybe there are some Cisco specialists reading this List =)
On a WS-C3750X it tooks about 1 minute after connecting a port to change the
status from LINK-3-UPDOWN up to LINEPROTO-5-UPDOWN up
Mar 27 16:25:37 192.168.1.144 788: *Mar 8 00:30:48.032: %LINK-3-UPDOWN:
Interface
One thing to watch out in VLAN config is that DHCP broadcasts are sent in the
default VLAN, not the tagged VLAN.
But I'm not sure how this applies to access ports. I remember however that I
once expected DHCP requests to come in on the tagged VLAN on the router (which
was DHCP server) but they
configuration between portchan and gig)
-steven
-Ursprüngliche Nachricht-
Von: swinog-boun...@lists.swinog.ch [mailto:swinog-
boun...@lists.swinog.ch] Im Auftrag von Tobias Brunner
Gesendet: Dienstag, 3. April 2012 09:24
An: Swinog
Betreff: [swinog] EtherChannel - Long Time between LINK-3
10 matches
Mail list logo