Re: [Telrad] Uplink throughput again

Mar 14, 2017, at 10:06 PM, Scott <lamb...@lambertfam.org> wrote: > > Hi Justin, > > What is your minimum CINR? What network do you have between your EPCs > and the eNB's? > > Thanks! > >> On 3/14/17 10:58 PM, Skywerx Support wrote: >> We were contac

Re: [Telrad] Uplink throughput again

ing dumb questions, but because the answers have not yet been found. >> >> >> >> What's different is that Ubiquiti won't send you an engineer to check your >> stuff out. Telrad's commitment to support is real, if spotty. We had a truly >> enjoyable

Re: [Telrad] Uplink throughput again

The Telrad Wispa forum is starting to remind me of the Ubiquiti forum. The same exact people posting with the same exact issues. But only like three people!!! Issues like why can't I put 80 people on a Rocket M5, or how do I configure a Rocket M5?Why does service suck on my access points? Oh

Re: [Telrad] Ethernet RX FCS errors from BreezeWay?

t; > Port 9 was the other port I tried. No difference. > > How much is "a bit" longer? The cable currently being used is I think > between 7 and 10 ft (I'll check tomorrow). > > -- Nathan > > > From: telrad-boun...@wispa.org <telrad-boun...@wispa.org> on

Re: [Telrad] Ethernet RX FCS errors from BreezeWay?

Nathan have you used a bit longer cable from EPC to router and use port 9. This fixed our FCS error issue. -- Justin Davis COO SkyWerx Industries, LLC > On Feb 16, 2017, at 5:00 AM, Nathan Anderson wrote: > > So, as an update to this, we are still seeing these FCS errors

Re: [Telrad] Issues

e causing > an issue? I have not really seen any speed problems until we got to around > 25-30UE’s on a eNB, at that point I have been unable to get the upload speeds. > You would think on a 80x10 plan (for us only to test with), and the eNB only > moving small amount of

Re: [Telrad] Issues

see if they exhibit this same upload speed issues. > From little rumblings in the Service Dept I think I will find they all do > this. > > Nick is working on this and I am sure he will come up with a solution soon. > > Matt Carpenter > > > > > >> O

Re: [Telrad] Issues

t;mcarpen...@amarillowireless.net> wrote: > > Two Centralized EPCs. > > Right now they are 1010RPL (2020L), but we are software upgrading them to the > 2020CS this week. > > Matt Carpenter > > > >> On Wed, Nov 16, 2016 at 8:07 PM, Skywerx Support <jus...@skywerxsu

Re: [Telrad] Issues

Matt, Are you using site based or centralized EPC? Thanks -- Justin Davis COO SkyWerx Industries, LLC > On Nov 16, 2016, at 4:43 PM, Matthew Carpenter > wrote: > > From what I have seen running 4573: > > 1. 4x4TM4 is working good. I have 2 eNB’s using it