On Fri, Jan 18, 2013 at 12:58 AM, Gianluca Cecchi wrote:
> I start from DVD iso on iDRAC and after selecting install
> (both nomal/default and troubleshooting--> basic video drivers)
>
> I land at dracut shell saying
>
> dracut-initqueue Warning could not boot
> dracu
Hello,
sort of off-topic as F18 has been released, but here probably other ones
tested on this kind of server during release cycle
I start from DVD iso on iDRAC and after selecting install
(both nomal/default and troubleshooting--> basic video drivers)
I land at dracut shell saying
dracut-initqu
Jóhann B. Guðmundsson" wrote
>
> - in systemd units means do not fail if the file ( or command in some
> cases ) does not exist ( or in the case of commands fails )
Ah, OK
And any hint about sysconfig nfs file apparently not parsed to enable nfs
v3 and bind to fixed ports?
--
test mailing list
tes
Hello,
running Fedora 18 with latest updates.
When I plug in an usb key or a usb disk I get two entries in file manager
as from this screenshot:
https://docs.google.com/file/d/0BwoPbcrMv8mvTEw5Sy1JMTk4aEE/edit
The first entry if I click gives this error as from this image:
https://docs.google.com/
On Thu, Jan 3, 2013 at 12:31 AM, Bruno Wolff III wrote:
> On Thu, Jan 03, 2013 at 00:12:06 +0100,
> Gianluca Cecchi wrote:
>
>>
>> I thought it was for both but actually as root I'm able to connect, while
>> as normal user not...
>>
>
> That is e
On Mon Jan 7 11:35:20 UTC 2013 Brendan Jones wrote:
> Use 3 instead?
>
Not tried that but I noticed (about ten consecutive boots alternating
randomly one or the other option, see below) what confirms this:
- If I leave boot command line unchanged and only add " S" + F10 --> boot
OK in single user
Hello,
I have an f18 vm (updated up to last week) running on a f17 host.
It starts correctly in run level 3, but if I try to run it in single user
mode this way:
- stop grub boot process
- edit kernel line
- keep off "quiet rgb" at the end
- insert " S" at the end
- press F10 to boot
it regularly
On Sun, Jan 6, 2013 at 9:04 AM, Gianluca Cecchi wrote:
>
> ...
> $ applydeltaiso Fedora-18-TC4-x86_64-netinst.iso
> Fedora-18-Final-RC1-x86_64-DVD_netinst.diso Fedora-18-x86_64-netinst.iso
> reading 470098036 bytes from old iso...fread: Success
>
> no image produced...
>
$ ls -l
total 299064
-rw-rw-r--. 1 gcecchi gcecchi 26424 Jan 6 09:00
Fedora-18-Final-RC1-x86_64-DVD_netinst.diso
-rw-rw-r--. 1 gcecchi gcecchi 152 Jan 6 09:01
Fedora-18-Final-TC4_RC1-x86_64-MD5SUM
-rw-rw-r--. 1 gcecchi gcecchi 248 Jan 3 17:55
Fedora-18-TC4-x86_64-CHECKSUM
-rw-rw-
On Wed, Jan 2, 2013 at 6:33 PM, Bruno Wolff III wrote:
> On Wed, Jan 02, 2013 at 01:29:59 +0100,
> Gianluca Cecchi wrote:
>
>> Hello,
>>
>>
> Are you logging in as root when this happens?
>
I thought it was for both but actually as root I'm able to conne
Hello,
Sometimes when doing various types of maintenance for a server,I work this
way in rhel based systems and fedora pre-18:
- boot in single user mode
- service network start
- service sshd start
- connect via ssh from another system
With current f18 I get a message regarding the system booting
On Tue, Dec 18, 2012 at 11:39 AM, Gianluca Cecchi wrote:
> Hello,
> trying to install from netinst.iso on a server that has vlan tagging.
> I saw that there is this old bugzilla open but not already resolved/worked
> on:
> https://bugzilla.redhat.com/show_bug.cgi?id=624752
> I
Hello,
just to say that testing again with TC2 netinst.iso it now works if I select
Troubleshooting--> use basic video drivers
I get the grpahic inital setup and both keyboard and mouse work.
I don't know what changed in kernel/anaconda, but nothing changed on my side...
Now I have to check if and
On Wed Dec 12 14:13:11 UTC 2012 Adam Jackson wrote:
> No.
> Seriously, install using vnc and capture the X log after installing.
>
> - ajax
To try it what should I run?
perhaps adding at kernel line
vnc vncpassword=qwerty ip= netmask=... gateway= dns=.
?
Also, my server is on vlanid 65
On Tue Dec 11 19:52:37 UTC 2012 Nicolas Chauvet wrote:
> There is a NTH blocker bug related to rd.driver.black been dis-functional.
> https://bugzilla.redhat.com/show_bug.cgi?id=873220
> (with a patch sent to the dracut upstream mailing list).
At least in installation phase it seems that
rd.driver
Another test I've done with final TC1 is to select
Troubleshooting --> Install with basic graphics mode
It arrives at language selection screen and blocks.
Could it be perhaps not a video issue but something related to my
input devices (aka mouse/keyboard)?
Neither Ctrl-Alt-Del sorts any effect in
Tried also this way
remove: quiet
insert: xdriver=vesa vga=ask
then selected 318
result is that I recevie error rgarding X Windows System start and
when I land to text selection menu no keyboard and no Alt+Fx
see screenshots
https://docs.google.com/open?id=0BwoPbcrMv8mvRnR6blJVWlZNUWs
https://doc
I tried both with nomodeset and without it...
Il giorno 11/dic/2012 21:00, "Adrian" ha scritto:
> **
>
>
>
> On Tue, Dec 11, 2012 at 1:17 PM, Adrian wrote:>
> xdriver=vesa acpi=off replacing quiet in linux
>
> No way.
> Made as you suggested brings to startx failed like this screenshot and
> no
On Tue Dec 11 15:31:46 UTC 2012 Adam Jackson wrote:
> Gonna need to see an X log from this to know why it's failing, I think.
> If you can't extract it from the install environment, you might try
> installing through text or vnc and seeing if X fails at runtime too.
The problem is that with and wi
TC1 of final netinst.iso fails worse neither arrives at initial screen
Some other info:
cpu=4xdual core amd
cpuinfo:
...
processor : 7
vendor_id : AuthenticAMD
cpu family : 15
model : 65
model name : Dual-Core AMD Opteron(tm) Processor 8222
stepping : 3
cpu MHz : 3013.888
cache size : 1024 K
On Tue, Dec 11, 2012 at 1:17 PM, Adrian wrote:
> xdriver=vesa acpi=off replacing quiet in linux
No way.
Made as you suggested brings to startx failed like this screenshot and
no input accepted at all:
https://docs.google.com/open?id=0BwoPbcrMv8mvNlJ2Y2dnZnVPbFU
--
test mailing list
test@lists.fe
Tried graphial and text but they both freeze...
See for text
https://docs.google.com/open?id=0BwoPbcrMv8mvQlpTYmVKUUlYTmM
tried nomodeset and leaving off quiet but no way...
Anything to further understand...?
No keyboard at all..
Thanks
Gianluca
--
test mailing list
test@lists.fedoraproject.or
Hello,
installing with netinst.iso from official f18 beta and trying adding
blacklist=qla2xxx
but during kernel boot I see the module loaded...
Is there any different cheatcode in f18?
Thanks,
Gianluca
--
test mailing list
test@lists.fedoraproject.org
To unsubscribe:
https://admin.fedoraproject
Hello,
I'm going to receive a raspberry in a few days and I would like to
test upcoming Fedora 18 on it as there is already a F17 remix.
Any repositories already in place or would it be a remix ready only
post-final f18?
Would be feasible to use it as a client to connect to oVirt
infrastructure th
Hello,
based on
http://lists.ovirt.org/pipermail/users/2012-November/004887.html
and relative schedules for oVirt and Fedora:
https://fedoraproject.org/wiki/Releases/18/Schedule?rd=Releases/18
http://www.ovirt.org/OVirt_3.2_release-management
will the feature page
http://fedoraproject.org/wiki/F
Hello,
I'm trying F18 TC9 on a system where I had F16.
With TC9 the problem related to installation abort when using wireless
card is now solved and I'm able to install.
(see https://bugzilla.redhat.com/show_bug.cgi?id=875393)
One question: in F16 I had 5 users configured and I was able to see
the
Actually I installed TC8 yesterday and this morning I installed
evolution-mapi and applied these packages' updates proposed by
updates-testing repo:
Nov 14 10:34:05 Updated: nss-util-3.14-1.fc18.x86_64
Nov 14 10:34:05 Updated: nss-softokn-freebl-3.14-1.fc18.x86_64
Nov 14 10:34:06 Updated: 2:libwbc
Hello,
installed TC7 on 5/11 and applied updates at the same date.
I was able to correctly configure and use evolution-mapi against an
Exchange 2007 server.
Today same vm scratched, installed TC8 and updates.
Unable to configure evolution-mapi account:
it successfully goes through all the configur
Add-on: after yesterday updates at guest f18 side, now it works
without tablet too.
Note that another change I did was the line
hvm
that I previously had as pc-0.14 because I recycled an f17 guest
config file fro scratching it.
It seems instead that I simulate creation of a f18 guest right now, it
On Thu Nov 8 03:36:55 UTC 2012 Adam Williamson wrote:
> IIRC the use of a tablet was actually *added* in recent releases because
> it makes the pointer tracking more accurate and avoids the double-cursor
> effect.
I remembered my opinion due to a past thread in spice-devel mailing
list last year.
Hello,
testing what in subject, without the tablet definition in guest I'm unable
to use my mouse:
the pointer moves, but the click doesn't produce any effect...
Instead the graphical install phae of F18 tc7 from netinst.iso in the same
vm was without problems regarding mouse, only after reboot
I
On *Tue Nov 6 12:39:55 UTC 2012 *Kamil Paral wrote
> Yes, please file a bug with anaconda. They need to hear the feedback,
they don't monitor this mailing list as much.Done:
https://bugzilla.redhat.com/show_bug.cgi?id=873693
Gianluca
--
test mailing list
test@lists.fedoraproject.org
To unsubscri
See this screenshot of a pre-instaled F17 vm where I run the netinst.iso
for install.
https://docs.google.com/open?id=0BwoPbcrMv8mvR3RkdGhwd3JYaDA
It is not so clear in my opinion (at list it took half a minute to me to
understand... forgive me ;-) to click on right most column of each line and
see
On Wed, May 30, 2012 at 12:45 AM, Gianluca Cecchi wrote:
> Hello,
> Having a laptop without cd and not connected to the internet I'm
> testing replacing an existing f16 (no backup needed)
>
> First attempt:
> - put vmlinuz and initrd.img from dvd iso into the /boot director
Hello,
Having a laptop without cd and not connected to the internet I'm
testing replacing an existing f16 (no backup needed)
First attempt:
- put vmlinuz and initrd.img from dvd iso into the /boot directory of
f16 installation
- put dvd iso under an usb external disk (/f17 dir in its first
partiti
On Tue, Nov 22, 2011 at 12:00 PM, Gianluca Cecchi wrote:
> On Tue, Nov 22, 2011 at 11:22 AM, Alon Levy wrote:
>
> So I opened this bugzilla
> https://bugzilla.redhat.com/show_bug.cgi?id=755892
>
> I took the time to report your comments, Adam and Alon, making copy-paste.
> F
On Tue Nov 22 16:18:01 UTC 2011 Josh Boyer wrote:
>>On Tue, Nov 22, 2011 at 10:54 AM, Adam Williamson wrote:
>> modinfo asserts:
>>
>> parm: i915_enable_rc6:Enable power-saving render C-state 6
>> (default: true) (int)
>>
>> are you sure it's *not* the default?
>
> Yes. Modinfo is lying
Hello,
I have an Asus U36SD laptop, with Optimus technology.
I'm not sure if my current approach is the correct/more safe one.
I think more and more devices are going to have this technology, so
this could be a cue to address future F17 potential users problems
At the moment I have F16 x86_64 on i
On Tue, Nov 22, 2011 at 11:22 AM, Alon Levy wrote:
>
> I think I have the same problem here, I've followed it once, gdbing the
> server, it was in select, so maybe I'll try to do it again and do the
> 'print AllClients' - for me reproducing is 100% by doing a chvt /
> suspend and resume. To get bac
On Mon, Nov 21, 2011 at 4:26 PM, Adam Jackson wrote:
[snip]
>
> So my next intuition would be to gdb the X server and see what's up. If
> you find it waiting patiently on a call to select(), then the second
> case is more likely, and 'print AllClients' should show you an fd_set
> with only one bit
On Fri, Nov 18, 2011 at 7:00 PM, Adam Jackson wrote:
> If you debuginfo-install gnome-shell, attach with gdb instead of sending
> SIGHUP, and run 'thread apply all backtrace', what do you get?
>
> - ajax
>
As MJ whould have said... This is it ... ;-)
Gianluca
gnome-shell_debug.log.gz
Descript
On Fri, Nov 18, 2011 at 7:00 PM, Adam Jackson wrote:
> On 11/18/11 9:44 AM, Gianluca Cecchi wrote:
>
>> Sometimes (latest days at least one time a day), the gnome session
>> goes unusable: I'm able to move mouse, but when selecting a menu item
>> it is greyed bu
Hello,
this question is mainly related to F16, but perhaps relevant for
current rawhide too.
Eventually I'm going to test this problem with rawhide too...
I didn't have these problems with rc2/rc3 or first final F16 kernel...
On my system with corei7 and sandybridge I'm noticing problems in
gnome-
Hello,
in F15 I was using righthotcorner and alternative-status-menu.
On the same hw installed from scratch F16 rc5 and then updates.
I installed then
gnome-shell-extension-righthotcorner-1.0-1.fc16.noarch
gnome-shell-extension-alternative-status-menu-3.2.0-1.fc16.noarch
But none of them is workin
On Wed Nov 2 15:17:09 UTC 2011 Richard Marko wrote:
> Just tested and it works fine with RC4. (It was broken in RC1 or 2)
And I confirm that installing in a Qemu/KVM (host is
f15+virt-preview), with direct kernel+initrd boot from rc4 and
choosing:
- fresh install
- customize now
- deselect gnome
-
On Wed Oct 26 18:09:48 UTC 2011 Adam Williamson wrote:
> Well, I can't reproduce the most worrying issue here, with TC2: I just
> took the TC2 DVD, selected KDE, de-selected GNOME, and got a system with
> kdm installed but not gdm. It boots to a kdm login window and I can log
> in.
> Did you make a
On Wed, Oct 26, 2011 at 3:46 PM, Gianluca Cecchi wrote:
> Installation completed but at first boot I completed the normal user
> definition and sent profile, but then instead of login window I get a
> window with message:
>
> failed to load session "gdm-shell"
>
>
Hello,
trying to test
https://bugzilla.redhat.com/show_bug.cgi?id=731245
as from the message
[Test-Announce] Remaining F16 blockers and F16 planning
I installed from f16tc2 vmlinuz+initrd.img inside a kvm guest with
direct kernel boot.
host is f15+virt-preview and selected spice as video adapter
A
Hello,
I have F15 + virt-preview environment.
I configured a vm with "kernel 2.6 with virtio" (in virt-manager.log I
get "OS: linux:virtio26").
Then I changed config and deleted disk0 and created it as an ide disk.
Booting from CD I installed the OS without problems.
I then added a second ide disk.
On Mon, Oct 17, 2011 at 4:33 PM, Gianluca Cecchi wrote:
> Hello,
> is it expected to work a command such as this, after downloading
> vmlinuz and initrd for f16 final tc1 (x86_64):
>
> virt-install --os-type=linux --os-variant=fedora16 --boot
> kernel=/tmp/f16tc1/vmlinuz,
Hello,
is it expected to work a command such as this, after downloading
vmlinuz and initrd for f16 final tc1 (x86_64):
virt-install --os-type=linux --os-variant=fedora16 --boot
kernel=/tmp/f16tc1/vmlinuz,initrd=/tmp/f16tc1/initrd.img -r 1024
--name f16 --disk=/var/lib/libvirt/images/f16.img --netw
On Fri Oct 14 12:48:32 UTC 2011 drago01 wrote:
> > So the link I gave:
> > http://nouveau.git.sourceforge.net/git/gitweb.cgi?p=nouveau/envytools;a=commitdiff;h=b645e6f7d9f204a9176747f129e9e365dcd877ce
> > is somethng about kernel part of nouveau?
>
> No this is completely unrelated.
Ok. I see only
On Wed Oct 12 01:30:57 UTC 2011 Adam Williamson wrote:
> There's nothing really interesting in the xorg-x11-drv package any more.
> All the interesting bits are in the kernel module, which gets updated
> very frequently.
Ok.
So the link I gave:
http://nouveau.git.sourceforge.net/git/gitweb.cgi?p=n
Hello,
I have a nvidia NVD9 (GY520 on a laptop... GF119 chipset) that
currently is not supported in f15
(xorg-x11-drv-nouveau-0.0.16-24.20110324git8378443.fc15)
The chipset was probably added around mid may in nouveau git repo...
http://nouveau.git.sourceforge.net/git/gitweb.cgi?p=nouveau/envytools
On Tue, Jun 7, 2011 at 6:37 PM, Adam Jackson wrote:
> On 6/7/11 12:17 PM, Gianluca Cecchi wrote:
>
>> BTW: suppose I put the top bar on top of external monitor. Then I
>> disconnect it.
>> What is it the expected behaviour? Top bar automatically repositioned
>> to the
On Tue, Jun 7, 2011 at 5:59 PM, Adam Jackson wrote:
> On 6/7/11 4:21 AM, Gianluca Cecchi wrote:
>
>> Perhaps it is a problem of the top bar representing a top limit for
>> windows placement?
>
> gnome-shell considers the top bar an impenetrable wall (from below), yes.
O
On Tue, May 31, 2011 at 12:20 PM, Gianluca Cecchi wrote:
> Hello,
> I'm trying here as F15 has been just released. Perhaps same problem in
> rawhide too..
> During latest days I have tested my XPS M1330 Dell laptop with nvidia
> proprietary drivers and now I'm evaluating
Hello,
I'm trying here as F15 has been just released. Perhaps same problem in
rawhide too..
During latest days I have tested my XPS M1330 Dell laptop with nvidia
proprietary drivers and now I'm evaluating switching to nouveau.
I have final F15 x86_64.
No xorg.conf file and no nvidia rpm bits.
I con
On Fri May 20 10:28:21 UTC 2011 Jiri Moskovcak wrote:
> It was probably running under different user then who is running the
> abrt-gui so gui can't access it and doesn't show it. You can try to run
> the gui as root to see all the crashes.
I had this problem too and indeed running the gui from ro
Hello,
on my F15 Rc3 running yum update today proposes this:
Transaction Summary
=
Install 2 Package(s)
Upgrade 75 Package(s)
Total download size: 109 M
All the packages are from "updates" repository.
On Wed May 18 14:39:06 UTC 2011 Jóhann B. Guðmundsson wrote:
>On 05/18/2011 02:28 PM, Brian C. Huffman wrote:
>> Nevermind. Apparently I just needed to stop and restart office.:-(
>
>Hum I would actually think that was an bug.
In my case I was totally unable to add a network printer from the
Sys
On Tue May 17 21:52:29 UTC 2011 Joshua Andrews wrote:
> It is very cool if you are running fedora 15 in a VM on virtualbox the
> newest version with guest additions seems to run the gnome-shell great.
Are you referring to virtualbox as provided by rpmfusion, so
VirtualBox-OSE-4.0.4-1.fc15.x86_64?
On Wed May 18 06:19:28 UTC 2011 Rob Healey wrote
> I remember that in the old Gnome 2.x
[snip]
> To safely remove the device, you could right click the icon, and choose
> "Safety remove..."
On Wed May 18 06:26:20 UTC 2011 Adam Williamson wrote:
> There's an 'eject' button next to it in the file m
On Fri, May 13, 2011 at 5:19 PM, Gianluca Cecchi wrote:
> On Fri May 13 15:01:01 UTC 2011 James Laska wrote:
>> Does the file '/etc/selinux/targeted/policy/policy.24' exist? Did your
>> install complete successfully, I'd be surprised if that file was missing
>
On Fri May 13 15:01:01 UTC 2011 James Laska wrote:
> Does the file '/etc/selinux/targeted/policy/policy.24' exist? Did your
> install complete successfully, I'd be surprised if that file was missing
> on your installed system. Make sure that package is intact by running
> `rpm -V selinux-policy-t
On Fri, May 13, 2011 at 2:56 PM, Gianluca Cecchi
wrote:
> Here is a video booting with "S" instead of "rhgb quiet"
>
> https://docs.google.com/leaf?id=0BwoPbcrMv8mvZjQ0NjIyYmQtYzBmMC00NTA2LWEzNzUtMDBhOGE2MThjODQx&hl=it&authkey=CJ-eiboD
>
> Gianluca
>
Here is a video booting with "S" instead of "rhgb quiet"
https://docs.google.com/leaf?id=0BwoPbcrMv8mvZjQ0NjIyYmQtYzBmMC00NTA2LWEzNzUtMDBhOGE2MThjODQx&hl=it&authkey=CJ-eiboD
Gianluca
--
test mailing list
test@lists.fedoraproject.org
To unsubscribe:
https://admin.fedoraproject.org/mailman/listin
Hello.
try to install rc2 in a vm
host is F14+virt-preview
guest is configured with spice
guest was a pre-existing f15 beta + updates (till some days ago)
I chose to install new and selected my partitions asking to format all.
It concludes ok, but at reboot I get the situation in attached
image...
Currently on my F14 system I have my / and my /f13 partitions already on ext4.
This last one was a previosuly F13 root filesystem I kept when
installing f14 so I always have a dual environment when upgrading.
So I'm going to install my f15 inside my ex f13 partition and I'm
considering whether refo
Hello,
I just installed f14 beta as a vm inside rh el 5 host some days ago
and didn't have time to test a lot.
This morning I wanted to update and with graphical window I got "all
software is up to date" (see attachment)
Doubtfully, I ran "yum update" and actually got
[r...@f14 gcecchi]# yum updat
70 matches
Mail list logo