Hello Time Nuts (and Time Lords!),
This is my first real post here, and I understand fully, I am but a
grasshopper when it comes to some of the messages I have seen on the list.
I am needing a GPS source of precise time, in three flavours - 10MHz (or
so), 1PPS, and ethernet NTP. In the beginning,
Hello Time Nuts (and Time Lords!),
This is my first real post here, and I understand fully, I am but a
grasshopper when it comes to some of the messages I have seen on the list.
I am needing a GPS source of precise time, in three flavours - 10MHz (or
so), 1PPS, and ethernet NTP. In the beginning
edgecombe...@gmail.com said:
> I am needing a GPS source of precise time, in three flavours - 10MHz (or
> so), 1PPS, and ethernet NTP. In the beginning, the NTP will be most
> important, and as time goes on, I'll need the 1PPS signal.
...
> If a static CW12-TIM ethernet clock could be made, I wou
Hal,
As much as I'd like to explain the "big picture" in list, it would make God
awful noise - if you wish to know any details, I encourage you to respond
to me off list. Given the fact that the robotics is so totally off topic,
I'm not willing to discuss them here. Thats only out of respect to th
> I am needing a GPS source of precise time, in three flavours - 10MHz
(or
> so), 1PPS, and ethernet NTP. In the beginning, the NTP will be most
> important, and as time goes on, I'll need the 1PPS signal.
I know DIY is always lots of fun, but if you want to get up and running
quick with little to
Shane:
The question I think that is being asked is ...
What does "precise" mean to you?
To the nearest order of magnitude, what kind of accuracy are you looking for
on your three signals. This defines the kind of system you will need.
This group normally aspires to the more accurate end of the s
Graham,
I think that is the real challenge here: most folks don't know what
"precise" means for them. Timing is such a novel technology that most folks are
amazed that we are trying to get parts per trillion (or better) accuracy and
stability!
We get customers all the time that want very
Said,
... and deprive us from cheap surplus oscillators of good performance?
What where you thinking? :)
But I agree fully with your point, people don't understand how their
poorly speced requirements translate into cost and design-time.
Accurate time to the fs for no budget is what you can e
As some of you no doubt know microshaft has stopped supporting windows XP.
As part of this they have ceased to correct windows XP clocks. This seams
rather small of them as it can't possibly be any inconvenience to them to
continue to provide this service.
I have a program on my old 98 box wh
Have you looked into NTP for Windows?
Bob
From: Max Robinson
To: Time Nuts
Sent: Saturday, July 12, 2014 6:29 PM
Subject: [time-nuts] Setting Windows XP clock.
As some of you no doubt know microshaft has stopped supporting windows XP.
As part of this the
I use nmeatime, you can set from the net or from a gps plugged in to the
computer.
Have used it on all my computers for many moons.
http://www.visualgps.net/nmeatime/
Don
Max Robinson
> As some of you no doubt know microshaft has stopped supporting windows XP.
> As part of this they have ceased to
You don't need an app.
1. Right click on the time display in the task bar.
2. Select 'Adjust Date/Time'.
3. Click on the 'Internet Time' tab.
4. Type in any server you want. I suggest 'us.pool.ntp.org'. This
gives you access to a pool of servers so that if one is down or wrong,
the next one w
This is what I was looking for. On this computer I only need accuracy
within a few seconds. Thank you to all who suggested alternatives.
Regards.
Max. K 4 O DS.
- Original Message -
From: "Ed Palmer"
To: "Discussion of precise time and frequency measurement"
Sent: Saturday, Jul
Max,
In the Control Panel, click on Date & Time. In the date & Time Properties
window, click the Internet Time tab. Make sure the "Automatically
synchronize with an Internet time server" box is checked.
In the Server: box, copy the following server name and paste it into the
Server box:
time
What did Microsoft actually do? Possibly Windows XP was set by default to
use some time servers at Microsoft and those servers were shut down. If so
all you need to do is change the configuration file to use public "Pool"
servers.
But is this what happened? Did Microsoft actually have NTP serve
Hi Max
You do not want to have your XP box connected to the internet at all.
This is not something that can be dealt with by any anti-virus software you
are running.
There are parts of XP that can be exploited by an outside hacker. Software
can be installed and run on your system without your kn
At 07:29 PM 7/12/2014, Max Robinson wrote:
>Does anyone know of a program I can download that will do the same for my XP
>box.
For years I have used a program from the National Institute of Standards and
Technology, NISTime:
http://www.nist.gov/pml/div688/grp40/its.cfm
You can run it manually
Hi Max - try Dimension 4, www.thinkman.com/dimension4/ In a large number of
situations, XP's time sync does not work.
Dimension 4 works.
Dave -
With all due respect, there is no problem running Windows XP provided that
you have a good antivirus such as Avast www.avast.com
(Free version). The o
Graham,
Yeah, I suppose I'm not aspiring to the most precise of the measurements, I
want something that'll give me a reasonable accuracy on a budget.
Inside the RaspberryPi is a free running 1MHz oscillator - if I could train
it with a 1PPS to a good degree of accuracy (say 10ns to 100ns or so) I
Said, good measure! Put it into dollars!
This helps! Let me have a think about my budget...
On Sun, Jul 13, 2014 at 9:02 AM, Shane Morris
wrote:
> Graham,
>
> Yeah, I suppose I'm not aspiring to the most precise of the measurements,
> I want something that'll give me a reasonable accuracy on a
For years I have used a program from the National Institute of Standards
> and Technology, NISTime:
>
> http://www.nist.gov/pml/div688/grp40/its.cfm
This quote from a highlighted section on the above page:
...users are strongly encouraged to switch to the Network Time Protocol
(NTP), which is mo
Hi John
Both applications are excellent choices. Malwarebytes also offers a great
free system scanner that will detect rooted malware (this is the stuff that
runs without your knowing it is there). It has to be run manually but it is
excellent.
There is a lot going on behind the scenes besides we
Paul -
You over paid ;)
Neither one is going to break the bank, but I found the Westclox Model 72006
'Atomic LCD Alarm Clock' $10.97 at Walmart. Similar module inside.
Paul
On Jul 11, 2014, at 12:55 PM, paul swed wrote:
Intended to add the model number.
Cosco only has one type a c89201
On
As some of you no doubt know microshaft has stopped supporting windows XP.
As part of this they have ceased to correct windows XP clocks. This seams
rather small of them as it can't possibly be any inconvenience to them to
continue to provide this service.
I have a program on my old 98 box which
24 matches
Mail list logo