Confirmation... setting the "Start In" field to match the "Target" field
allows LH to use the heather.cfg in the Target directory, irrespective
of where the shortcut is placed.
Mike
On 12/12/2016 06:44, Mike Millen wrote:
On 11/12/2016 23:23, Alberto di Bene wrote:
On 12/12/2016 12:00 AM,
On 11/12/2016 23:23, Alberto di Bene wrote:
On 12/12/2016 12:00 AM, John Miles wrote:
But when Heather's initial working directory isn't in the usual
Program Files hierarchy,
it tries to load the .cfg file from the same directory as the
executable.
In my case the ,cfg files was in the same
Arnold,
I also set the time zone using the 'tz' command while LH is running.
Sorry, I forgot to mention that.
On Sun, Dec 11, 2016 at 07:52 PM, Arnold Tibus wrote:
Hi Mike,
my installation did work the same way as you describe, the program did
start and showed UTC -
but as I am living
> As said, if I put the .cfg file in the system32 directory I can set eg.
> the new time zone.
> Strange, if I enable eg. the esc esc command to shut off LH, it does the
> job well, but with the exception for the time zone setting, this and all
> the other commands once set are not anymore to be di
Hi Mike,
my installation did work the same way as you describe, the program did
start and showed UTC -
but as I am living in another time zone and I did want to show CET (or
in german MEZ), I tried to modify this by using the config file in the
program directory and not to append the commands in t
Compiles and runs perfect on Ubuntu 16.04, and auto-detects the tbolt right
away.
THANKS!
-Gar
On 2016-12-11, at 4:09 PM, n2lym wrote:
> Hi Arnold,
>
> I'm running windows pro 64bit, it installed in Program Files(x86). I made a
> shortcut on the desktop that points to heather.exe with the
Hi Arnold,
I'm running windows pro 64bit, it installed in Program Files(x86). I
made a shortcut on the desktop that points to heather.exe with the /3
switch because my lucent box is there on serial port 3. Lady Heather
auto detected and all is well.
Many thanks to Mark and John for this gre
John,
I am a none in programming, but can anybody tell me why it does work?
I tried it now several times with different settings for the time zone ...
I am running WIN7 pro 64 and the program did install in Program Files(86).
Editing the heather.cfg in this directory does have no effects ...
???
A
Hi Mark,
Many thanks!
I can report that it built without intervention on my Debian linux.
I look forward to test it out on various receivers.
For linux you probably want to set CFLAGS and include -g in the build.
Running with valgrind does not come out clean, which is a good test to
help catch
On 12/12/2016 12:00 AM, John Miles wrote:
But when Heather's initial working directory isn't in the usual Program Files
hierarchy,
it tries to load the .cfg file from the same directory as the executable.
In my case the ,cfg files was in the same directory as the executable, outside the
"Pro
Yeah, that's probably something we should fix. Installation programs don't
normally set that field at all. But when Heather's initial working directory
isn't in the usual Program Files hierarchy, it tries to load the .cfg file from
the same directory as the executable. This is something I do
On 12/11/2016 1:25 AM, Mark Sims wrote:
The heather.cfg file has a com port setting (/1u) and a /rxa (receiver
auto-detect) command
line option setting which gets processed before the settings on the command
line.
Try editing heather.cfg file and change the /1u command to /0
Problem fixed.
Mark
Thank you for the secret on setting the receiver I was making it way to
hard.
The 3801 absolutely has a problem. Locks and everything just fine. Takes
about 20 minutes from a cold start. It will accept commands I am not
getting the correct output back. Everything had worked so it is a real
pro
Hmm, that doesn't make any sense at all. Nothing should be written to
\windows\system32 by the installer under any conditions.
-- john, KE5FX
Miles Design LLC
> Many thanks Brian!
>
> I found it!
> In Windows 7 (10?) this file must be copied into the system32 directory
> of windows in order
Many thanks Brian!
I found it!
In Windows 7 (10?) this file must be copied into the system32 directory
of windows in order to be read and enable the instructions to be executed.
73
Arnold DK2WT
Am 11.12.2016 um 21:51 schrieb Bryan _:
> Arnold:
>
>
> It seems during the install at least on Windo
> It seems during the install at least on Windows 10 that it does not give the
> full permissions to the files. I just gave the folder the correct permissions
> after the isntall. If you go to help, at the bottom of the screen it tells
> you
> where during the install another copy of the heather.
Arnold:
It seems during the install at least on Windows 10 that it does not give the
full permissions to the files. I just gave the folder the correct permissions
after the isntall. If you go to help, at the bottom of the screen it tells you
where during the install another copy of the heathe
Version 5.00 is working well with my 58503A, but I did find one annoying
behavior. If LH is the active application, as in it has keyboard focus, I find
my screen saver will not activate.
Jim WN1X
On 12/11/2016 11:45:10 AM, paul swed wrote:
Mark
I am trying to use Heather with a z3801. I have t
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hello Mark,
many thanks for your immense and invaluable work!
I am using the trimble thunderbold together with LH version 3 all the
last years with success, I like your program very much.
I downloaded and installed today the version 5, but I have some problems
because it looks like my windows 7 d
At the bottom of the command line help screen dialog, it should show what
command was causing problems.
You should not need to do anything. Z3801A should be auto-detected. You can
skip the auto-detect by editing the heather.cfg file and changing the /rxa
command to /rxz
Are you using a null
Mark
I am trying to use Heather with a z3801. I have tried numbers of
combinations of what should set the system to the Z receiver. But none seem
to work. It immediately brings up the help screen and I assume that says
the command is bad.
I have no problem making the TBolt work.
Wonder if you could
22 matches
Mail list logo