trigger circuit error so I fed the
inputs with a locked TTL signal rather than a sine wave using Manual Trigger
with no difference. It seems to be a coarse count error so I'll investigate
the start/stop logic chain.
Adam
___
time
be causing this?
Thanks,Adam MacDonaldShalimar, FL
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I was wondering how expensive it would be to have even a small and lower
level time lab. What are some less expensive models of machinery i would
need, and how much maintenance is required?
Thanks, Adam
___
time-nuts mailing list -- time-nuts@febo.com
are gone, and 130 units will be out there in 12
countries (so far).
I do not normally monitor this email reflector, so please email me directly, if
you want to obtain a ThunderBolt Display.
Cheers,
Adam, VK4GHZ
___
time-nuts mailing list -- time-nuts
you can contact me via my
web site, as linked to above, if you are interested in obtaining a ThunderBolt
Display.
Cheers,
Adam, VK4GHZ
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-
ress found in the topic.
Cheers,
Adam, VK4GHZ
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
hat did I do with my extra second? Afghanistan is in the +4.5
time-zone, so I slept through it. I'm happy with that. Any others on
this list in one of the x.5 time-zones?
--adam, wh6m
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscrib
Anybody willing to
help a newbie?
Inquiring minds . . . .
thanks,
--adam, wh6m
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
> From: saidj...@aol.com
> To: time-nuts@febo.com
> Message-ID:
>
> I figured out that the unit fluke.l sells is running firmware to emulate
> the Motrola M12+ receiver or similar. So WinOncore 12 does work, and I can
> get the following receiver ID:
>
> COPYRIGHT 2008 Trimble Navigation L
Has anyone ever repaired a Tbolt which exhibits the "dead serial port"
phenonmenon ? I've seen a couple of people post about their Tbolts being
"dead" in this manner, ie the serial port gives no output, and doesn't
respond to any input, but the 10Mhz and 1pps outputs work. Seems a shame
to pitc
Date: Sat, 17 Jul 2010 08:40:23 -0400
> From: "Stan, W1LE"
> Subject: Re: [time-nuts] Did my Tbolt die ?
>
> Hello Adam, I suspect that:
>
> Upon rebooting, the OS came up and did not recognize the (serial) COM
> port assignment you had used before.
>
> Che
After rebooting one of my servers, I noticed that I was no longer
getting information from my Thunderbolt. Low and behold, it really seems
to be no longer supplying TSIP packets on the serial port. The PS is
okay, and the PPS and 10Mhz outputs also are working. Its just the
serial output which seem
I recently picked up an Acutime off of Ebay. I'm wondering if
1) The acutime is broken
2) There's something wrong with the cheapo USBtoRS422 convertor
3) My wiring
It appears to function, but exhibits strange behavior. Here are 3 URLs
with pngs of screenshots from the (they're 20K each, but I fig
Now that I've managed to get the connectors for the Trimble, I need to
make some cables -- at first I thought I could use a single, outdoor
rated Cat5/6 cable (gel/gas filled), but this is probably a bad idea, as
you really want all 12 wires, so that you can get at both serial ports.
For a 50Meter
>
> I guess this might be a little ot for this thread but maybe not. I'm
> a newbie to all of this stuff but judging from the archives freebsd
> seems to be the OS of choice for these highly accurate NTP servers.
> Why is the case? Is there something specific to it that makes it more
> suitable f
15 matches
Mail list logo