Bob,
I would be interested in 4 Furuno GT-8736 boards if you order.
Mike
On Thu, Feb 15, 2018 at 01:55 PM, Bob Darlington wrote:
I bought some of the Furuno GT-8736 boards for $35 a pop, qty 1 (or 2
as
was the case). And was quoted at $26.91 a pop if I buy 100. If
there's
at 50, 100
or 150 Hz
is going to be a bit exciting.
Bob
On Dec 22, 2016, at 4:04 PM, n2lym wrote:
Dave,
Look at it with a narrow band SA and see if it's modulated by 100Hz.
73,
Mike N2LYM
On Thu, Dec 22, 2016 at 07:39 AM, Dr. David Kirkby (Kirkby Microwave
Ltd) wrote:
On 22
Dave,
Look at it with a narrow band SA and see if it's modulated by 100Hz.
73,
Mike N2LYM
On Thu, Dec 22, 2016 at 07:39 AM, Dr. David Kirkby (Kirkby Microwave
Ltd) wrote:
On 22 December 2016 at 03:17, paul swed
wrote:
Dave Congratulations on 10 Ghz SSB.
This was not a QSO
with the experts.
Unfortunately I am not at home so I am not in the position to run LH
with my Thunderbolt, but one can start at least with the time display
functions :-)
Yes, I forgot to thank as well John for the great program, sorry John!
73
Arnold, DK2WT
Am 12.12.2016 um 01:09 schrieb n2lym:
Hi
for this great work!
73
Mike N2LYM
On Sun, Dec 11, 2016 at 06:49 PM, Arnold Tibus wrote:
John,
I am a none in programming, but can anybody tell me why it does work?
I tried it now several times with different settings for the time zone
...
I am running WIN7 pro 64 and the program did install
Have you tried a loop back connection, short pins 2 and 3 and a terminal
program? You may have to disable hardware handshaking in hardware
manager for that USB device or possibly a baud rate problem.
Mike
On Fri, Nov 04, 2016 at 08:23 PM, Dave Hallidy wrote:
Hal-
I took your suggestion
Kapton tape.
On Thu, Oct 27, 2016 at 12:15 AM, Ed Palmer wrote:
I recently bought an unused FTS-1000A Oscillator.
My previous experience and Christopher Hoover's recent experience
warned me that with time and heat, the red rubber blanket that
surrounds the oven will bond the oven assembly
Test
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Yes the diagnostic port on the slave unit diaplay's gps data just like
the Z3811. Therefore there must be serial data being exchanged on the 15
pin interconnect.
Mike
N2LYM
Message: 5
Date: Sun, 2 Nov 2014 15:58:20 -0500
From: gandal...@aol.com
To: time-nuts@febo.com
Subject: Re: [time
I have modified Ulrich's executable for the Z3811 and it works fine.
Email me if you want a copy. Does anyone have pinout information for
these?
Mike
73 DE N2LYM
Message: 1
Date: Thu, 30 Oct 2014 21:49:06 -0400
From: Bob Camp To: Discussion of precise time and frequency
measurement
10 matches
Mail list logo