Okay, so I've partially disassembled my 10811, I have checked most of the
points in the manual and everything appears okay.
A couple questions though. There are a pair of black wires running from the
top PCB down under the board below it (I haven't removed that board yet to
see what is
It's probably the thermistor. What model are you playing with?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Jason Rabel
Sent: Monday, January 22, 2007 5:16 PM
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] 10811 Repair
, January 22, 2007 5:16 PM
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] 10811 Repair (was warmup / bad batch)
Okay, so I've partially disassembled my 10811, I have checked most of the
points in the manual and everything appears okay.
A couple questions though
can get it all apart like in the manual.
Jason
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Jack Hudler
Sent: Monday, January 22, 2007 5:41 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 10811 Repair (was warmup
PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
Of Jason Rabel
Sent: Monday, January 22, 2007 5:16 PM
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] 10811 Repair (was warmup / bad batch)
Okay, so I've partially disassembled my 10811, I have checked most of the
points
What voltage goes to the crystal? I may have had my scope scale too high and
just didn't notice, but at first glance I don't think it was getting power.
Jason
-Original Message-
Yes, the black wires are the thermistor.
The crystal has three wires. Two are actually connected
to the
Dr Bruce Griffiths wrote:
Jason Rabel wrote:
What voltage goes to the crystal? I may have had my scope scale too high and
just didn't notice, but at first glance I don't think it was getting power.
Jason
-Original Message-
Yes, the black wires are the thermistor.
The
Dr Bruce Griffiths wrote:
Dr Bruce Griffiths wrote:
Jason Rabel wrote:
What voltage goes to the crystal? I may have had my scope scale too high and
just didn't notice, but at first glance I don't think it was getting power.
Jason
-Original Message-
Yes, the black