12, 2011 16:53:04 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On 10/11/2011 6:28 PM, Peter Bell wrote:
For some reason, the No GPS LED is back - although the GPS is
tracking 8 satellites in 3D mode and according to the TRAIM status the
timing error is below the alarm threshhold
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Wed, Oct 12, 2011 16:53:04 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On 10/11/2011 6:28 PM, Peter Bell wrote:
For some reason, the No GPS LED is back - although the GPS is
tracking 8 satellites in 3D mode
and frequency measurement time-nuts@febo.com
Sent: Tue, Oct 11, 2011 12:49:45 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
The Rx was defective - I just got the new one, hooked it up to my
little test rig anf the antenna, and it happily picked up satellites
and got a position fix
Wireless
-Original message-
From: Peter Bellbell.pe...@gmail.com
To: Discussion of precise time and frequency measurementtime-nuts@febo.com
Sent: Tue, Oct 11, 2011 12:49:45 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
The Rx was defective - I just got the new one, hooked it up
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, Oct 12, 2011 08:02:24 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
Much as I hate to follow up on my own post, I just power cycled the
unit and it quickly went from 2D-3D-Position Hold with the No GPS
LED out
Bell bell.pe...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Wed, Oct 12, 2011 08:02:24 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
Much as I hate to follow up on my own post, I just power cycled the
unit and it quickly went from 2D
...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, Oct 9, 2011 05:52:25 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On Sun, Oct 9, 2011 at 3:31 AM, k4...@aol.com k4...@aol.com wrote:
Peter, do you have the software for this unit? The GPS
Bell bell.pe...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, Oct 9, 2011 05:52:25 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On Sun, Oct 9, 2011 at 3:31 AM, k4...@aol.com k4...@aol.com wrote:
Peter, do you have the software
-
From: Peter Bell bell.pe...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Tue, Oct 11, 2011 12:49:45 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
The Rx was defective - I just got the new one, hooked it up to my
little test rig anf
-
From: Peter Bell bell.pe...@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Tue, Oct 11, 2011 12:49:45 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
The Rx was defective - I just got the new one, hooked it up to my
little test rig anf
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, October 9, 2011 9:13:14 PM
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On Mon, Oct 10, 2011 at 2:41 AM, k4...@aol.com k4...@aol.com wrote:
Hi Peter, yes it sounds like the UT+ is defective if it never
@febo.com
Sent: Fri, Oct 7, 2011 14:13:31 GMT+00:00
Subject: [time-nuts] Lucent RFTG-m-XO GPSDO
I have been playing with one of these units, and noticed that there
has been some discussion on them before on this list, so I wondered if
anyone might have any suggestions.
Basically, the unit powers up
On Sun, Oct 9, 2011 at 6:55 AM, EB4APL eb4...@cembreros.jazztel.es wrote:
Peter,
My UT+ works ok with common antennas, I tested it with a Trimble 28367-00
and with a INPAQ AAF-03B 5V. Both are quite old garden variety GPS
antennas intended for car navigators so your problem can be in the
: Peter Bellbell.pe...@gmail.com
To: time-nuts@febo.com
Sent: Fri, Oct 7, 2011 14:13:31 GMT+00:00
Subject: [time-nuts] Lucent RFTG-m-XO GPSDO
I have been playing with one of these units, and noticed that there
has been some discussion on them before on this list, so I wondered if
anyone might have any
time and frequency measurement time-nuts@febo.com
Sent: Sun, Oct 9, 2011 05:52:25 GMT+00:00
Subject: Re: [time-nuts] Lucent RFTG-m-XO GPSDO
On Sun, Oct 9, 2011 at 3:31 AM, k4...@aol.com k4...@aol.com wrote:
Peter, do you have the software for this unit? The GPS antenna is supposed
to draw apx. 20
Hi, K4CLE
A while ago, I invested $600 in two pairs of the GPSDO and LPRO units.
Intended to replace a pair of 48 volt Z3801 receivers with 24 volt units.
Put them in the project pile for lack of drawings and software, where
they have languished. Their value has dropped, but I'd still like to
On Mon, Oct 10, 2011 at 2:41 AM, k4...@aol.com k4...@aol.com wrote:
Hi Peter, yes it sounds like the UT+ is defective if it never gets any sats.
You can probably find one on eBay. Someone probably fired RF into the
receiver front-end and zapped it. I think the antenna you are using should
-nuts] Lucent RFTG-m-XO GPSDO
On Mon, Oct 10, 2011 at 2:41 AM, k4...@aol.com k4...@aol.com wrote:
Hi Peter, yes it sounds like the UT+ is defective if it never gets any sats.
You can probably find one on eBay. Someone probably fired RF into the
receiver
front-end and zapped it. I think
by DROID on Verizon Wireless
-Original message-
From: Peter Bell bell.pe...@gmail.com
To: time-nuts@febo.com
Sent: Fri, Oct 7, 2011 14:13:31 GMT+00:00
Subject: [time-nuts] Lucent RFTG-m-XO GPSDO
I have been playing with one of these units, and noticed that there
has been some
I have been playing with one of these units, and noticed that there
has been some discussion on them before on this list, so I wondered if
anyone might have any suggestions.
Basically, the unit powers up correctly, but the No GPS LED never
goes off - this obviously could be because it's broken or
20 matches
Mail list logo