> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Tom Van
> Baak
> Sent: Monday, June 19, 2017 3:42 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] TBolt help...
>
> Hi Dave,
>
> There was one other report
>
> Joe
>
> -Original Message-
> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Tom Van
> Baak
> Sent: Monday, June 19, 2017 3:42 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] TBolt help...
>
> Hi Dave
hi
i have powered down a few times and no no joy
thanks
dave
On Mon, Jun 19, 2017 at 1:58 PM, Mike Naruta AA8K wrote:
> On 06/19/2017 04:16 PM, Dave Mallery wrote:
>
>> hi
>>
>> My Tbolt has been running for a long time, since the final group buy.
>>
>> It is still running (indicated by the 1
time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Tom Van Baak
Sent: Monday, June 19, 2017 3:42 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] TBolt help...
Hi Dave,
There was one other report of something similar over the past ten years. I did
not look into
On 06/19/2017 04:16 PM, Dave Mallery wrote:
hi
My Tbolt has been running for a long time, since the final group buy.
It is still running (indicated by the 10MHz output) but there is no data
coming out the serial port. LH says so and so does my lil TSIP monitor, as
well as my rs-232 cable monito
recise time and frequency measurement"
Sent: Monday, June 19, 2017 1:16 PM
Subject: [time-nuts] TBolt help...
> hi
>
> My Tbolt has been running for a long time, since the final group buy.
>
> It is still running (indicated by the 10MHz output) but there is no data
> comin
Hi
First thing to check is the solder joints on the 9 pin connector. They have
been a
bit of a problem on other TBolts. After that, check the voltage on the data out
(TX)
pin. It should be negative by at least 3V and more likely 5V. If it’s not,
check your
negative supply into the unit and th
hi
My Tbolt has been running for a long time, since the final group buy.
It is still running (indicated by the 10MHz output) but there is no data
coming out the serial port. LH says so and so does my lil TSIP monitor, as
well as my rs-232 cable monitor/breakout devices. I have tested all the
cab
> Just bought a Tbolt but cannot put it into operation. After a factory
> reset the Tboltmon gets stuck in Aug 22,1999 and the Self-Survey
> Progress at 1%. The following warnings in yellow:
How long have you waited? How good is your antenna location?
The self survey takes a long time. Severa
How long have you waited for the self survey to complete? I can take quite
a time.
Dave
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of asma...@fc.up.pt
Sent: 21 July 2009 12:35
To: time-nuts@febo.com
Subject: [time-nuts] Tbolt help
Hello!
Just bought a Tbolt but cannot put it into operation.
After a factory reset the Tboltmon gets stuck in
Aug 22,1999 and the Self-Survey Progress at 1%.
The following warnings in yellow:
-Satellite Tracking;
-Oscillator Disciplining;
-Self-Survey Activity;
-Stored Position;
-Almanac.
All t
11 matches
Mail list logo