turday, January 27, 2018 8:55:30 AM
To: time-nuts@febo.com
Subject: Re: [time-nuts] Trimble Thunderbolt Issue
On Sat, January 27, 2018 9:47 am, J. L. Trantham wrote:
> I remember an issue with another OCXO where the output coupling capacitor
> connection failed and outputs were low.
The thunderb
On Sat, January 27, 2018 9:47 am, J. L. Trantham wrote:
> I remember an issue with another OCXO where the output coupling capacitor
> connection failed and outputs were low.
The thunderbolt uses the output of the OCXO for driving internal clocks,
so likely the OCXO output is OK, but a buffer betwe
cussion of precise time and frequency measurement
Subject: Re: [time-nuts] Trimble Thunderbolt Issue
Do not toss, first check output of OCXO if good keep if you do not fiend the
problem. If no output replace. If L H shows that it works bring OCXO output
directly.Bert Kehren
Sent from my Gal
) To: time-nuts Subject:
[time-nuts] Trimble Thunderbolt Issue
I have a T-Bolt whose 10 MHz output has dropped off to about 6 mV. Using T-Bolt
Mon,
all the Alarms are Green and it shows Tracking 3 or 4 Satellites (small Hockey
Puck Antenna).
Without a schematic I am lost as to where to look
I have a T-Bolt whose 10 MHz output has dropped off to about 6 mV. Using T-Bolt
Mon,
all the Alarms are Green and it shows Tracking 3 or 4 Satellites (small Hockey
Puck Antenna).
Without a schematic I am lost as to where to look.
Anyone have any suggestions ? I had to toss an otherwise worki
