atmospheric pressure taken for a weather observation is measured in
millibars and respresents the barometric pressure at ground level at
that location. If the instrument is located somewhere besides ground
level it will be corrected to ground level.
The value given in inches of mercury is th
I ran across this very issue when trying to calibrate my barometer chip against
the NWS station located less than two miles away. Their numbers for millibars
and inches of mercury do not agree. I sent them an email and asked what was
going on. They said their instruments read out in millibars
On May 23, 2014, at 11:12 PM, Mark Sims wrote:
> The nice thing about measuring temperature via sonic measurements is that the
> measurements are unaffected by solar heating of the apparatus... it does not
> need to be in the shade.
I stumbled on this paper a while back when I was investigati
Hi Mark:
The key benefit of an ultrasonic wind speed/direction sensor is that it can
detect very slow wind speeds.
My Peet Bros. system does not start telling me anything until the speed is a
few MPH.
http://www.prc68.com/I/UltimeterWeatherStation.shtml
But all the weather stations I've seen d
Here in Canada, for many years we have officially used km/hr and
kilopascals (kPa) for all reporting (both civil and aviation). These
units are now easily understood by the general population.
Personally, for pressure I preferred hectopascals but over the years
even I have adapted to the offi
hektopascal is pseudo-SI form, as it is a compromize between the old
milibar and propper SI unit of Pascal with suitable prefix 1 mbar = 1
hPa, but since we have normal pressure at 1013 mbar we should write it
as 101,3 kPa but not 1013 hPa if we is to follow SI all the way.
Temperature in C is
Hello,
Wind speed usually in meters/sec (when used for scientific data) or km/h
(used in the news, so the people can compare with car speed ;) )
Pressure in millibars. Meteorologist also usually refers to
hectopascals, but it is more for representing something at a given
altitude (for example,
Hi Mark,
I second Paul Henning,
here in Europe we use officially the SI standard, does mean m/s and hPa!
Privately used other units are another thing like km/h or units Beaufort
and mb (millibar),
but not official. If possible use always the international SI units and
as personal choice km/h,
hPa
In message , Mark Sims writes:
>I am building a weather sensor that includes a ultrasonic anemometer
>Now the question... I would like it to be able to output data in
>imperial or metric units. In what units is the typical wind speed
>reported (meters/sec, km/hour, ?). Also air pressure
>(m
Here in the US, most people who really care about wind speed think
knots. For causal use to the general public them it's MPH.
If you want to be esoteric use the "Beaufort Wind Scale" It is
actually still used because it can be estimated from looking at the
water. It is easy to learn to tell a
There is a great sonic anemometer in:
"An inexpensive sonic anemometer for eddy correlation" G.S.Campbell and
M.H.Unsworth, (1979), Journal of Applied Meteorology Vol 18, August 1979, Pp.
1072-1077.
This unit uses 4000 CMOS, a LM301A and two cheap ultrasonic transducers. It
operates a phase-lo
On Sat, 24 May 2014 01:16:32 +, Mark Sims wrote:
> Now the question... I would like it to be able to output data in
> imperial or metric units. In what units is the typical wind speed
> reported (meters/sec, km/hour, ?). Also air pressure
> (millibars/hectopascals/pascals/?).
Our weath
On Saturday, May 24, 2014, David J Taylor
wrote:
>
> Now the question... I would like it to be able to output data in imperial
> or metric units. In what units is the typical wind speed reported
> (meters/sec, km/hour, ?). Also air pressure (millibars/hectopascals/
> pascals/?).
In the US
I am building a weather sensor that includes a ultrasonic anemometer to
measure wind speed, direction, and air temperature. It uses 4 cheap ($1
each) HC-SR04 ultrasonic rangefinder modules that output a pulse width
proportional to the time of flight of the sound signal (topic is time nut
rela
>The project sounds like a fun hack -- I would be curious as to the >resolution
>you achieve with these modules.---
The best description on the net about building a sonic anemometer is one by
Hardy Lau:http://www.technik.dhbw-ravensburg.de/~lau/ultrasonic-anemometer.html
I have also built on
I have a crappy Chinese-made handheld propeller anemometer. I'm not in
Europe but FWIW the output can be selected as: m/s, km/h, ft/min, knots
or mph. So, the first two of those seem to be likely metric choices.
Your method sounds interesting. Would you be willing to share any
details about h
Beaufort scale
> Mark
> I think wind speed is also in Bueforts. Pretty sure thats misspelled.
> Regards
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/list
f Of Mark Sims
> Sent: Friday, May 23, 2014 18:17
> To: time-nuts@febo.com
> Subject: [time-nuts] Weather/units question for European members
>
> I am building a weather sensor that includes a ultrasonic
> anemometer to measure wind speed, direction, and air
> temperature. It
Mark
I think wind speed is also in Bueforts. Pretty sure thats misspelled.
Regards
On Fri, May 23, 2014 at 9:16 PM, Mark Sims wrote:
> I am building a weather sensor that includes a ultrasonic anemometer to
> measure wind speed, direction, and air temperature. It uses 4 cheap ($1
> each) HC-SR
For civilian use, Miles/hour and inches Hg. Aviation and marine would be
knots and inches Hg.
Tom
- Original Message -
From: "Mark Sims"
To:
Sent: Friday, May 23, 2014 9:16 PM
Subject: [time-nuts] Weather/units question for European members
I am building a weather s
I am building a weather sensor that includes a ultrasonic anemometer to measure
wind speed, direction, and air temperature. It uses 4 cheap ($1 each) HC-SR04
ultrasonic rangefinder modules that output a pulse width proportional to the
time of flight of the sound signal (topic is time nut relat
21 matches
Mail list logo