Richard (Rick) Karlquist (N6RK) wrote:
I imagine that that is because HP just went on the warpath, and declared
all copies of their manuals verboten. I just got several notices from
ebay telling me about how some HP manuals on CDs that I bought
were infringements
on HP's intellectual property. T
Well, that's certainly interesting. Maybe the Agilent counsel should
include this tidbit in their threatening letters, to avoid the loss of
goodwill that's happening as a result of the BAMA takedown notice.
If they are trying to ensure that all of the manuals out there are
standardized and offici
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> Behalf Of Chuck Harris
> Sent: Wednesday, April 20, 2005 8:14 PM
> To: [EMAIL PROTECTED]; Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] connections for HP 10811A ?
Bill,
>From my original Shera System.
Pin 1 - 10 MHz out
Pin 2 - Ground
Pin 3 - Osc/amp 10.6 to 11.7 volts 15 ma
Pin 4 - 10 MHz out ground
Pin 5 - EFC ground
Pin 6 - EFC (control -5 to +5)
Pin 7 -
Pin 8 - Oven controller 10.6 to 11.7 volts 5 ma
Pin 9 - Oven controller return
Pin 10 - ---
On Wed, 20 Apr 2005, Bill Janssen wrote:
> I picked up a HP 10811A today and need the connection information.
>
> I tried the WEB and went to the "Bama" site but at Bama they removed all
> HP info.
>
> Thanks
> Bill K7NOM
I don't have time now, but are 99.9% sure I downloaded a manual (I'm not
su
Bill,
I'm not sure where the diagram went on my
site so use the one halfway down this page:
http://home.teleport.com/~oldaker/10mhz_construction.htm
/tvb
http://www.LeapSecond.com
- Original Message -
From: "Bill Janssen" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, April 20, 2005 19:02
S
I imagine that that is because HP just went on the warpath, and declared
all copies of their manuals verboten. I just got several notices from
ebay telling me about how some HP manuals on CDs that I bought were
infringements
on HP's intellectual property. This was old stuff too, from the early '