hi
i have written applications to sense data and transmit to the
basestation(mote connected to personal computer) successfully
but i don't know how to send the data or a signal(such as output a high
signal on DAC0 in the tmote with moteid X) from the basestation( mote
connected to personal
Hi Joe,
Thanks for your reply! We have already figured it out by changing BCSCTL2
and TARGET_DCO_KHZ values. Our experiment is successful. Of course, the
solution you provided is very elegant and user friendly.
Thank you very much!
Haodong
When you are using Boomerang, you can compile for
When you are using Boomerang, you can compile for an 8MHz clock by
using a compile time flag. Specifically:
CFLAGS=-DMSP430_USE_ROSC_8MHZ make tmote
I've cc'd tinyos-help@millennium.berkeley.edu for others that may find
this information helpful.
-Joe
On 7/9/07, [EMAIL PROTECTED] [EMAIL
Hi,
I tried as you said and i got this message and always says died- restarting,
Listening to [EMAIL PROTECTED]:10002
Listening for client connections on port 9002
end-of-stream
[EMAIL PROTECTED]:10002 died - restarting
Note: when i wrote make tmote install,1 netbsl, x.x.x.x:10002 command i
Since I have no idea nor any control over what Crossbow installs, it
is very difficult for me to even pretend to know what the problem
is... I'm afraid you're on your own on this one.
Moteiv's CD installs all of the tools (except for avr-gcc) for
Crossbow platforms including Mica2 and MicaZ.
On Apr 23, 2006, at 10:44 PM, Liu, Ping ((GE, Research)) wrote:
Hi Phil
Thanks for the reply. However,the set-mote-id script just generates
different images with different node IDs, fundamentally it's still
a flashing/reflashing mechanism. I would like to avoid it for
security reasons,
