Dear all,
Thank you very much for your help. Now it is working and doing the multihop
networking.
Thanks again
Ranal
Date: Thu, 17 Jul 2008 14:37:06 +0900From: [EMAIL PROTECTED]: [EMAIL
PROTECTED]: Re: [Tinyos-help] SurgeTelos
Please use SurgeTelos application for the Sink node
Dear all,
I have a problem with SurgeTelos.
I created the TOS image injected it to several telosb motes having 1, 2, and
3 as the addresses. I created a TOSBase (with the address 0) gave the
following command.
Java net.tinyos.tools.Listen
But it is only getting the data from the mote
hi
i am trying to do multihop on telos through
surgetelosbut i am not seeing any send message or yield in GUI
both fields are blank..
please help me..is there any alternative to do th project as given in this
link
http://www.eecs.harvard.edu/~mdw/course/cs263/assn1/index.html
thanks
vivek
Hi
I was trying to use SurgeTelos in tmote platform. My objective was to
call timer.start() if a packet has been received with
type=SURGE_TYPE_ROOTBEACON. But i am facing the following warning:
nesc1: warning: calls to ReceiveMsg.receive in SPM fan out, but there
is no combine function specified
Hi All,
I am trying to run SurgeTelos on TelosB motes Using Tinyos 1.1.15.
I have installed SurgeTelos on mote 0,1,2,3 and have mote 0 attached to USB
port as a basestation.
When I run java net.tinyos.surge.MainClass 125 after invoking serial
Forwarder I get a sensor network topology screen with
Hi All,
I am trying to run SurgeTelos on TelosB motes Using Tinyos 1.1.15 and I am
stuck at crucial phase in my project.
I have installed SurgeTelos on mote 0,1,2,3 and have mote 0 attached to USB
port as a basestation.
When I run java net.tinyos.surge.MainClass 125 after invoking serial
Hi All,
I am trying to run SurgeTelos on TelosB motes Using Tinyos 1.1.15.
I have installed SurgeTelos on mote 0,1,2,3 and have mote 0 attached to USB
port as a basestation.
When I run java net.tinyos.surge.MainClass 125 after invoking serial
Forwarder I get a sensor network topology screen with
Hello,
I am working with the SurgeTelos application and the code of MultihopLQI. It
would need to be able to distinguish the type of packages that are sent at
every moment (data or beacon) from the Send.send method of the CC2420RadioM.
Somebody could help me?
Thanks, Elena.
Hi,
I try to install apps/SurgeTelos on my mote.
Before install,I change DemoSensorC as Sensor in Surge.nc into VoltageC
as Sensor to read its voltage data.
and run make telosb install,0 bs1,5, make telosb install,1 bs1,6,connect
node 0 to my USB port.
SerialForwarder seems run fine, It
Dear all:
I have some problems about ucb/SurgeTelos app (combined with the surge program in java)[Environment]Moteivtelosb(upgraded)
tinyos 1.152 motes with SurgeTelos program (node id = 1and 2)
1mote with TOSBase (node id = 0)[Programs]tinyos1.x/contrib/ucb/apps/SurgeTelos
M Sean I am facing the same problem that you have mentionned in the message "SurgeTelos" in 18 october 2005in using many Telos motesto perform a sensor Network. I'd like to know if you have found a solution for this problemI would be grateful if you help me in this issue. Thanks in advance
Hi everyone, I am using SurgeTelos with 2 motes one connected to computer via USB acting as base station ( Id 0) and another mote having mote id 1. I got the following message displayed on my computer screen.Received message:14 00 00 00 00 00 7E 00 11 7D 00 00 00 00 00 00 21 00 00 00 00 00 87 0B
Hi,
I want to understand the Application SurgeTelos. I have some doubts if anyone can help me in clearing them:
1. In Surge.nc and SurgeM.nc (files of SurgeTelos NOT Surge), they have commented out the code related to
interface Bcast. Can anyone tell me what is the significance of this
Hi,all:
I have a problem of SurgeTelos program. Currently I got some tmote
sky. I try to rewrite the sensor drivers by modifying the SurgeTelos program.
But when I use Tosbase to listen the raw data. At very first, every is fine.
But after maybe 6 packets, I got the 5 duplicated
Hi,
I've been modifying SurgeTelos to work with TMote Sky and its sensor suite.
What I've been trying to do is to include the readings of all sensors in a
single message, but in doing so, an error in the communication occurs (The red
led stays lit). However, if I remove one of the fields in
You need to increase the size of the data payload by setting TOSH_DATA_LENGTH.
-Joe
On 5/26/06, Luis Enrique Palafox Maestre [EMAIL PROTECTED] wrote:
Hi,
I've been modifying SurgeTelos to work with TMote Sky and its sensor suite.
What I've been trying to do is to include the readings of
Hi All,
Has anyone sucessfully run SurgeTelos on TelosB motes Using Tinyos 1.1.11.
When I run java net.tinyos.surge.MainClass 125 after invoking serial forwarder I get a sensor network topology screen with Mote 0 showing. But It displays no data. Although serial forwarder shows increment in data
Chiang Cc: tinyos-help
Sent: Friday, December 23, 2005 12:35
PM
Subject: Re: [Tinyos-help] SurgeTelos apps
and surge/JAVA program
Hi Chiang,
Maybe there's no implementation for the beacon methodin java
application,
Take a look at the code.
Good Luck,
Chalermphol
On 1
Hi Chiang,
Maybe there's no implementation for the beacon methodin java application,
Take a look at the code.
Good Luck,
Chalermphol
On 12/22/05, 姜瑞豪 Steve Chiang [EMAIL PROTECTED] wrote:
Dear all:
I have some problems about ucb/SurgeTelos app (combined with the surge program in java)
Dear all:
I have some problems about ucb/SurgeTelos app (combined with
the surge program in java)
[Environment]
Moteiv tmote sky Tools CD v1.11 (upgraded)
2tmote with SurgeTelos program (node id = 0 and
3)
[Programs]
tinyos1.x/contrib/ucb/apps/SurgeTelos
tinyos1.x/tools/java/net/tinyos/surge
20 matches
Mail list logo
