I'm using the meyer noise data. I tried adding a one shot after I setup ctp
for 1 millis and bumped up the simulation to run for 10 cycles and
now the client gives the parent message before it tries to send but still
sits in the no route loop for the entire simulation. Any ideas? I'm goin
On May 17, 2010, at 8:18 PM, Omprakash Gnawali wrote:
> On Sun, May 16, 2010 at 11:28 AM, Newlyn Erratt wrote:
>> All:
>>
>> I'm having an issue getting CTP to work with a TOSSIM simulation I'm
>> running. I've enabled some of the debugging in CTP and from what I can tell
>> everything is sett
On Sun, May 16, 2010 at 11:28 AM, Newlyn Erratt wrote:
> All:
>
> I'm having an issue getting CTP to work with a TOSSIM simulation I'm
> running. I've enabled some of the debugging in CTP and from what I can tell
> everything is setting up properly. I get these messages from the sink:
>
> DEBUG
All:
I'm having an issue getting CTP to work with a TOSSIM simulation I'm
running. I've enabled some of the debugging in CTP and from what I can tell
everything is setting up properly. I get these messages from the sink:
DEBUG (1): clientPtrs[0] = 0x76a070
DEBUG (1): CtpRoutingEngineP$0$RootCon