RE: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-23 Thread Liu, Ping \(Research\)
(Research) Cc: Cory Sharp; tinyos-help@Millennium.Berkeley.EDU Subject: Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder If it wasn't OFF, he wouldn't have been able to program the mote in the first place... However, if he's testing hi

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-21 Thread Harri Siirtola
Original Message- From: <mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] [mailto:<mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Behalf Of Cory Sharp Sent: Thursday, December 15, 2005 2:57 PM To: Liu, Ping (Research) Cc: <mailto:tinyos-help@millennium.berkeley.edu>tinyos-help@millenni

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-21 Thread Tran Trong Tri
Hi, This may sound stupid to you but check if the little black switch on the programmer board(along the side) is set to OFF...If it's not OFF, the "write failed" error occurs...So just turn it OFF... Hope it helps  On 12/16/05, Liu, Ping (Research) <[EMAIL PROTECTED]> wrote: Cory,Thanks for the rep

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-21 Thread Harri Siirtola
EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cory Sharp Sent: Thursday, December 15, 2005 3:44 PM To: Liu, Ping (Research) Cc: <mailto:tinyos-help@millennium.berkeley.edu>tinyos-help@millennium.berkeley.edu Subject: Re: [Tinyos-help] What could be the reason for "write failed"

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-20 Thread Jacob Sorber
600? Or I need to set it specifically again. >> java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyS0:micaz>> Thanks again.> T.>> -Original Message-> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of> Cory Sharp> Sent: Thursday, December 15, 20

RE: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-20 Thread Liu, Ping \(Research\)
: Liu, Ping (Research) Cc: tinyos-help@millennium.berkeley.edu Subject: Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder I haven't used MicaZ motes in Linux. Hopefully someone else can chime in. - Cory On 12/15/05, Liu, Ping (Research) <[EMAIL PR

RE: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-20 Thread Liu, Ping \(Research\)
ECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cory Sharp Sent: Thursday, December 15, 2005 2:57 PM To: Liu, Ping (Research) Cc: tinyos-help@millennium.berkeley.edu Subject: Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder That's usually a mismatched bau

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-15 Thread Cory Sharp
ecember 15, 2005 2:57 PM > To: Liu, Ping (Research) > Cc: tinyos-help@millennium.berkeley.edu > Subject: Re: [Tinyos-help] What could be the reason for "write failed" > in serialForwarder > > > That's usually a mismatched baud rate -- the serial forwarder i

Re: [Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-15 Thread Cory Sharp
That's usually a mismatched baud rate -- the serial forwarder is configured for a different baud rate than what the mote is using. This page, while not exactly appropriate for your problem, will give you some idea about where you can look: http://www.moteiv.com/community/Change_the_default_UART_b

[Tinyos-help] What could be the reason for "write failed" in serialForwarder

2005-12-15 Thread Liu, Ping \(Research\)
Hi, What could be the reason for "write failed" while trying the serialForwarder? I am on 1.1.14. and serialForwarder was working fine for me earlier on 1.1.7. Thanks many! -T. ___ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https:/