Hi all,
I am working with tmote sky, and my aim is to use an external power supply,
connect it to the 10-pin expansion of the mote and using Trawler, observe
the voltage I put in the power supply. I have done the code to use the ADC
ports and to send the data via radio. The problem is when I see t
Hi Miriam,
The Supply Voltage for Tmote Sky is between 2.1V to 3.6V. I hope this
information is helpful to you.
Regards,
Weiping
miriam herraiz wrote:
Hi all,
I am working with tmote sky, and my aim is to use an external power
supply, connect it to the 10-pin expansion of the mote and usi
Your use of "external power supply" is a bit confusing...
I think what you are asking is how to measure a voltage on an ADC
input pin, not how to power the tmote externally, right?
Your connection to pins 3 & 9 is right. Then you want to read ADC0
and transmit the value. What do you mean by "I ca
Is Trawler reading from ADC0? Sorry if that's an ignorant question.
Also, if you are using a good lab
power supply, make sure pin 3 is hooked to the positive output voltage
and pin 9 is hooked to the negative output voltage of the supply. Do
not use the ground of the power supply. Lab power sup
