Congratulations, Jim, really well deserved!
73 mirko, S57AD
V V sob., 12. sep. 2020 ob 08:47 je oseba napisala:
> Hi Jim,
>
>
> Congratulations on your ARRL Technical Service Award
>
>
> Well done and well deserved!
>
>
> www.arrl.org/news/arrl-technical-service-award-conferred
>
>
> 73
> Frank
Came on for about an hour last night . . worked a few NA stations, including
across to Texas.
Conditions seemed fairly good, but not many stations on.
Roger G3YRO
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Congratulations Jim well deserved thanks for being there. I hope you are your
family are doing well after the fires. 73 Fred KB4QZH
Original message From: donov...@erols.com Date: 9/12/20 1:15
AM (GMT-05:00) To: cq-contest , topband
Subject: Topband: Congratulations to K9YC
Congratulations, Jim!
73, Bob
K5KPE
> On September 12, 2020 at 12:15 AM donov...@erols.com wrote:
>
>
> Hi Jim,
>
>
> Congratulations on your ARRL Technical Service Award
>
>
> Well done and well deserved!
>
>
> www.arrl.org/news/arrl-technical-service-award-conferred
>
>
> 73
> Fr
I ran into a problem like yours with tower raising. It turned
out that the feedline was acting as a vertical antenna and
the actual RX antenna did not have adequate feedline isolation.
When the tower is lowered, the unintentional vertical antenna
goes away.
As far as ferrites around the cables,
congratulations Jim...!!!
73,
Jorge
CX6VM/CW5W
El sáb., 12 sept. 2020 a las 2:15, escribió:
> Hi Jim,
>
>
> Congratulations on your ARRL Technical Service Award
>
>
> Well done and well deserved!
>
>
> www.arrl.org/news/arrl-technical-service-award-conferred
>
>
> 73
> Frank
> W3LPL
>
> ___
Mike
I have taken the liberty of changing to subject line to more accurately
reflect the content of your reply on the Waller Flag thread
After much reading and a lot of personal experience and experimentation
I am of the opinion that BOG front-to-back is a function not only the
length but th
Worked VK6LW this morning (1300Z) and he peaked 579 with QSB into
Santa Fe. Interestingly, I didn’t hear a peep from JAs, which are
usually plentiful here in the mornings. Band was quiet, more like
November conditions.
73,
Jim w8zr
_
Searchable Archives: http://www.contesting.com/_t
On 9/12/2020 5:26 AM, Mikek wrote:
My Technical knowledge is limited but, I have built directional AMBCB
antennas. Feed line isolation is critical to make a directional antenna,
directional! I have been criticized and been told, coax cable does not
pick up signal. Must be I don't use the
There have been a few comments about Rx antenna chokes. What I built
may be of interest.
10 turns of RG179 micro TFE 75 ohm coax thru a Fair-Rite 2631101902 #31
core (1.12od x 1.125L x .54id). Wound thru a 3d printed form with 10
slots that keeps the turns disciplined in order.
Measured R
10 matches
Mail list logo
