i've compared the Duet+DLIII to a Transporter, and the Transporter was
superior, in my opinion. more musical, greater depth/space, just
sounded more natural. plus, you save on a digital cable.
--
netchord
netch
nding.
--
netchord
netchord's Profile: http://forums.slimdevices.com/member.php?userid=21002
View this thread: http://forums.slimdevices.com/showthread.php?t=89045
___
Touch ma
fwiw, i had the same problem with my radio a few days ago.
my solution was to run ethernet to it, and it works flawlessly now. ;)
sorry i couldn't be of more help, but the symptoms i had are identical
to yours- won't connect even with the correct wireless password.
you are not alone.
I've added a 2nd system, with SBT and an NAD D7050 dac/amp. on the
whole I'm enjoying the NAD (although I have some room/speaker issues
that currently inhibit a full report on the system). I've added EDO,
and the NAD is recognized, and I can stream to it w/o the need for a USB
Hub. however, i o
Hi Gorlando,
I've had a similar issue, but recently made a change and it's made a
difference: i switched from IPv4 to IPv6 on my router. if you have
access to your router settings, and this option is available, it might
be something to try.
also, did you by chance recently switch from ethernet
Heuer wrote:
> Check to see what channel your router is using. If it is Channel 6 try
> changing it to 1 or 11 and reconnecting. It sounds as though your router
> could be set to Auto for channel selection so after a power outage
> reboot it selects what it thinks is the best channel and if that
Thinking of adding the new Schiit Modius dac to my Touch setup, and
would like to power it via USB. Schiit says if the Touch can output 5V
from its USB port then it should work. does anyone know if it can?
--
4 TB Drobo-->FW 800-->mac mini-->Ethernet
Transporter--> Wireworld Eclipse 6 coax--
Man in a van wrote:
> You will have to decide for yourself :):p
>
> ronnie
>
> https://docs.google.com/spreadsheets/d/1UnnpylzUvFW3oi0ip5ghpuWFfDVcufKCn8k54uhqYKQ/edit#gid=2
thanks- i wasn't necessarily talking about using EDO. my plan was to
use USB for power, and coax for signal.
--
4 T
Man in a van wrote:
> Well as bpa referenced, the usb2 is 500ma so maybe the SBT will drive
> it.
>
> If using the non EDO co-ax output it will be limited to 96 kHz
>
> ronnie
>
> Warning, drink has been taken whilst compiling this answer :):):)
drink has been taken while reading it. :)
Man in a van wrote:
> Hic !
>
> It might be worthwhile using EDO on the Touch for the co-ax and a 5volt
> 1amp supply for the dac thingy !
>
> But that neeeds an extra plug and whatknot and i'm guessing you don't
> want that.
correct. trying to keep the wires to a minimum.
--
4 TB Drobo--
I have an eero mesh network, and don't see a way to change the wifi
channel, which may be antithetical to mesh networks in any case.
--
4 TB Drobo-->FW 800-->mac mini-->Ethernet
Transporter--> Wireworld Eclipse 6 coax-->Meridian G61
G61--> Nordost Red Dawn-->Primare 30.3
Primare-->Ocos--Vienna
I can see the Touch in my bedroom (i have two) on the network, but it
has disappeared from LMS.
30799
30800
+---+
|Filename: 75D67DE7-DACE-42ED-BCE6-6889389240C5.jpg |
|Download: http://forums.slimdevices.com/atta
another interesting bit- on all my other squeezeboxen, the Hostname is
the name i've given the room in LMS. for both Touches, it's just
SqueezeboxTouch.
--
4 TB Drobo-->FW 800-->mac mini-->Ethernet
Transporter--> Wireworld Eclipse 6 coax-->Meridian G61
G61--> Nordost Red Dawn-->Primare 30.3
P
Redrum wrote:
> netchord, I know alot of the focus has been on wifi channel, but I
> wanted to tell you to keep your eyes open to other possibilities.
>
> As I stated, I too have frequent power failures, and when the power
> comes up, my system is not completely broken, but cri
I continue to have problems connecting the Touch to my wifi network. as
a possible solution, i'm considering adding a Wifi adapter, either via
the ethernet port, or, more elegantly, to the USB port of the Touch.
I'm not using EDO. would something like this work?
https://smile.amazon.com/Adapt
Greg Erskine wrote:
> Whenever I have had a wifi problem I make sure I am using a channel not
> used by my neighbours and set my router to that, so no auto channel
> selection.
>
> So I am not sure if its picking an unused channel or setting to NOT use
> auto that fixes it for me.
not possible
Tony T wrote:
> Are you having problems connecting, or is the WiFi dropping after youre
> connected?
>
> Ive read a few posts where people are having trouble with the SB Radio
> dropping WiFi, but havent seen any problems with WiFi dropping on the
> touch.
>
> What does the Touch show as th
Man in a van wrote:
> Just go with "NO" for the answer to that one :):)
>
> ronnie
is this speculation, or have you had some similar experience?
--
4 TB Drobo-->FW 800-->mac mini-->Ethernet
Transporter--> Wireworld Eclipse 6 coax-->Meridian G61
G61--> Nordost Red Dawn-->Primare 30.3
Primare
Tony T wrote:
> Isnt this WiFi adapter dongle a WiFi extender? If temporary placing
> the Touch closer to the router works (whats the signal strength
> reported by the Touch now?), then thiis might work. If it were me, Id
> give it a try, and if it didnt work, I would try to return it to
bpa wrote:
> Unlikely.
>
> Touch kernel is old so any driver for a USB device will have to be of
> the same vintage as the kernel, so chipset in USB stick would have to be
> compatible and driver would only know about 2.4Ghz channels b & g.
> Memory usage is tight and so unnecessary drivers we
20 matches
Mail list logo